Red RC » P Off Road

January 19, 2012

Dakotah Phend joins Pro-Line team

Pro-Line have made it official that they have signed TLR star Dakotah Phend. Tim Clark said “Dakota has already caught the attention of the racing community as an consistent A-main contender and Pro-Line is committed to being a key component for Dakotah to reach his future goals.” Dakotah had this to say about the new deal:

I am very happy to be running Pro-Line tires for 2012. I race both 1/10 electric and 1/8 nitro and Pro-Line has tires for all my racing needs. I’m looking forward to being part of the Pro-Line team.

Source: Pro-Line [prolineracing.com]

January 19, 2012

Pro-Line Hole Shot 2.0 & Square Fuzzie

Pro-Line have released a number of new additions to their tire range starting with the 1/8th buggy Hole Shot 2.0. The Hole Shot 2.0 provides more forward traction, increased steering response and is less edgy in the ruts making you faster than ever before. Their mini-pin and square lug technology combine to give your Buggy TQ pace and last through long mains. Also for 1/8th buggy is the Tazer and Blockade are now available pre mounted on V2 white wheels with the Tazer available in M3 and M4, while the Blockade only comes in M4. For 1/10th scale buggy there is the return of the Square Fuzzie. The new Square Fuzzie features countless square micro-pins laid out in a traction inducing grid pattern that will stick to the track like Velcro while the long center bars provide tons of forward bite and improved wear over the Original. These tires are ideal for any indoor/outdoor hard-packed dirt track where bar-type tires are not getting the job done. The new Square Fuzzies will give you the confidence inspiring forward and side bite to propel you to the front.

View the other tires here

January 19, 2012

Pro-Line 2012 Bulldog for RC8.2

New from Pro-Line for the Associated RC8.2 is the 2012 Bulldog. Ryan Cavalieri is preparing for the IFMAR World Championships in 2012 and has developed the most advanced body yet. He took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve maximum engine head cooling and stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency.

View more detailed images here

January 18, 2012

JConcepts Finnisher body for RB-5

JConcepts have announced that their Finnisher body shell is now available for the Kyosho RB-5 WC. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up where applicable, which helps eliminates large empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature and a louver which can be trimmed to allow air to escape at the top of the body through its V-shaped design. In addition to the newly designed body, JConcepts has included 2 of the latest 6.5″ wide Hi-Clearance rear wings which have been specifically designed to fit on the RB-5 buggy.

View more images of the RB-5 Finnisher here

January 18, 2012

Hot Bodies Gridlock tire

Hot Bodies’ new prototype Gridlock tire utilizes design features creating a tire that will be easier to drive while also providing a linear amount of steering gain throughout the steering travel. The Gridlock tire will make the car more stable and easier to drive on track conditions where the dirt is hard packed with some sharp edged bumps. Another condition the Gridlock tire performs great in is where the track might be a little too dusty for the Megabite tire but not loamy enough for the Megagrid tire. Hot Bodies Tires are known for their long life with low tread wear, the Gridlock tire’s tread wear life will be greater than that of the Megabite tire providing the consumer with a tire that performs very well and also has a long life.

View another image of the tire here

January 18, 2012

Travis Amezcua signs for Xray

Xray have announced that multiple USA Nationals and Worlds finalist, Travis Amezcua, is joining the Xray factory racing team. Sponsored by Xray USA and RC America, in 2012 Travis will be attending all main national and international events including IFMAR Worlds, ROAR Nationals, Dirt Nitro Challenge, Silver State, JBLR Nitro Series as well all regional races in California. Travis had this to say:

I am honored to work with one of the most professional and highly-admired RC car companies in the world. My goal is to work as hard as possible both on and off the track to support all Xray customers and personally to get back on top of the podium.

Source: Xray [teamxray.com]

January 18, 2012

TLR22 Brass weight system

TLR has released a new rear motor brass weight system for the TLR line of 22 vehicles. The new brass weight system allows racers to add a total of 14 grams of weight, in 7 gram increments, to the top of the transmission. It comes with two 16mm button head screws to secure the two 7 gram brass weights plates and the brass plates are laser etched with the weight of the brass weight and the TLR logo. The added weight to the rear of the vehicle provides more forward traction when exiting a turn. TLR has found that less weight is needed when mounted on top of the transmission compared to mounting the weight between the bulkhead and transmission case. The location of the weights also allows for easy access for quick tuning.

Source: TLR [tlracing.com]

January 17, 2012

Neumann & Honigl confirmed for EOS Rd1

The organisers of next month’s Euro Offroad Series season opener (February 10th to 12th) in the Czech Republic have confirmed that Team Durango will be sending their factory team to Hrotovice for round 1. Winner at the EOS Pilot race in Sweden last year, Joern Neumann will be in attendance, coming off a dominant indoor season that has seen him win both the DHI Cup and Petit race in the last fortnight. He will be joined by team mate Hupo Honigl, who also took a win at last weekend’s Petit race and both are confirmed to run in the 4wd, 2wd and 4wd SC classes. More top driver announcements will come in the next days, including a Japanese superstar, as this race shapes up to be a classic. Entry is currently open at MyRCM, so if you want to compete against the best in the World at an awesome venue with a great atmosphere then sign up now. For full event information please visit the EOS site here.