Red RC

May 23, 2017

Rioja & Abad win at Cantabrian Championship Rd3

The ASMOCAN club of Elechas, Cantabria in the north of Spain recently held round 3 of the Cantabrian regional championship. The race attracted a good amount of entries with drivers from all over the region attending in the 1/10th Touring Stock and 1/5th scale classes. In the Touring Stock class young Chicha Rioja took the TQ and win but the remaining podium spots where only decided in the final A-main with Alejandro Zarate and Edgar Schultz ultimately coming in 2nd and 3rd.

Continue reading the report here

May 23, 2017

BRCA Touring Car Nationals – Report

This past weekend saw the popular south coast Adur circuit host round 2 of the BRCA 1/10 Touring car national series. Yet again this year the event was fully booked and the optional Saturday practice saw most drivers taking to the track to fine tune their setups. Raceday started overcast but the wind had died down overnight, releasing the car’s full potential. In the Modified class tyres again proved to dominate the driver’s strategy with defending champion Chris Grainger electing to sit out round 1 clearing the way for round 1 winner Olly Jefferies to take the first leg and then sit out round 2 himself. Chris took round 2 to even it up but Olly came back onto track to take the third leg and secure the pole. Alexander Hagberg took the final round to leave himself tied with Chris, but Chris took the second spot on the grid by virtue of a faster run time. 2016 Adur winner Elliott Harper lined up 4th on the grid with young Harley Eldridge 5th.

Continue reading the report here

May 23, 2017

BMT 984 carbon fibre steering knuckle lever

Italian company BMT have introduced a new carbon fibre steering block lever for the 984 1/8th on-road car. The updated geometry will lead to an easier to drive car while also offering improved overall steering. The part is a direct fit and it features two mounting positions for the outer steering link ball stud.

Source: BMT [bmt-team.com]

May 23, 2017

Xray Lexan 1/8th off-road lightweight rear wing

Xray have introduced their new lightweight Lexan 1/8th off-road rear wing. Designed as a direct fit on the XB8 platform the pre-cut wing greatly lowers the overall centre of gravity thanks to its low weight while the optional centre fins and the pre-bent wicker area make for optimised stability and downforce. The rear wicker area also does away with the class-standard composite gurney flaps while also greatly improving the overall stability of the wing. Moulded-in dimples for the wing mounting screws allow to mount the wing in different positions without the need to make any measurements and the wing is usable on all XB8 platform vehicles including the XB8, XB8E and XT8.

Source: Xray [teamxray.com]

May 23, 2017

Daniel Kobbevik wins Norwegian 1/8th Buggy opener

The first round of the Norwegian 1/8th Off-road Championship was hosted by the Honefoss RC Club this past weekend with the weather forecast promising very mixed weather. Unfortunately the forecast was right and so the event started off with rain followed by pretty heavy rain but later the sun would come out, making for good racing conditions although it was pretty tough on the track as setup and tyre choice was a real challenge for the drivers. Racing wise the opening two rounds were won by Serpent driver Daniel Kobbevik while Rune Karlsen (Kyosho) snatched round 3 and SWorkz driver Björn Ivar Haug came out fastest in Q4. Ultimately it was Daniel who took the overall TQ with two wins and a 2nd place finish.

Continue reading the report here

May 23, 2017

Micha Widmaier doubles at South German regional race

A round of the South German 1/10th electric off-road regionals was held at the RC Cars Köngen club this past weekend. The event also marked the season opening race at the track that will hold the German 1/10th 4WD Nationals later in August. Micha Widmaier (SWorkz/Nosram) was the man to beat in the 2WD and 4WD Modified classes as he took wins in both categories with Tobias Hesse (Team C/Absima) and Justin Naumann (Team C/Absima) coming in 2nd and 3rd in the 2WD class while Luca Rau (Kyosho/Hacker) and Justin Naumann (Team C/Absima) rounded out the top 3 result in 4WD.

View the 4WD podium here

May 23, 2017

Team Associated RC8B3 FT rigid engine mount

Coming from Team Associated and made for the RC8B3 series of off-road vehicles is the Factory Team rigid engine mount. Using the part will reduce chassis flex and extend clutch bell and spur gear life as it restricts the clutch bell and spur gear area from flexing, saving tooth wear and ensuring more consistent power delivery. The part is machined from blue anodised aluminium and it comes including an aluminium fuel tank standoff and mounting hardware.

View another image here

May 22, 2017

LRP file insolvency & explain current situation

End of last week certain news sites have reported that German company LRP Electronic is facing financial difficulties. This had led to several rumours over the weekend regarding the current situation of the company and now forced LRP founder, Jürgen Lautenbach to clarify the situation. It is understood that LRP will try and continue with all business activities while also looking for a possible investor.

During the institution of the preliminary insolvency proceedings it is intended to continue the business activities of the LRP electronic GmbH in order to examine the possibilities of restructuring.

Read LRP’s statement in full here