September 16, 2016

EFRA 40+ On-road European Championships – Report

EFRA 40+ On-road European Championships – Report

The EFRA 40+ On-roaad European Championships were recently held in Hamm, Germany. In the 1/8th scale class it was last year’s winner Luca Martinelli (ARC) who saw the checkered flag in first position after delivering a flawless performance. The battle for the remaining podium spots was wide open between Shepherd colleagues Arie Manten, Andreas Giesa and Frank Schewiola. A few minutes before the end Andreas had a crash at the end of the straight caused by a piece of chunked tyre that saw him dropping him down the order. In the closing stages Frank tried to hunt down Arie but he ran out of time. Arie took the runner-up spot with Frank completing the podium. TQ Michael Salven had to retire early after he had a moment and damaged his car.

Continue reading the report here


September 16, 2016

Lorenzo Crolla takes double French EP Buggy title

Lorenzo Crolla takes double French EP Buggy title

The recent final round of the French 1/10th Electric Off-road National Championship saw Armand Lanthaume (Xray) and Lorenzo Crolla (Xray) battle it out for the title in both the 2WD and 4WD classes. Lorenzo was able to pull fast laps from the get go and despite being hampered by some setup issues in the final 2WD qualifiers he was able to take the overall TQs in both classes. In the 2WD finals Lorenzo’s task of the day was to finish in the top 3 in order to wrap up the title and the mission was accomplished as he scored two P2 and a P1 finish to end the day on the runner-up spot behind team mate Armand Lanthaume. Ludovic Valtier (Team Associated) completed the top 3 podium result.

Continue reading here


September 16, 2016

Wollanka tops 2WD seeding at Nurburgring

Wollanka tops 2WD seeding at Nurburgring

Martin Wollanka will be the top seed for tomorrow’s 2WD qualifying at the opening round of the Euro Offroad Series at the Nurburgring.  The Xray driver would be the only driver to complete 3-consecutive laps in 58-seconds when he went fastest in the final round of practice outpacing reigning champion Lee Martin by 2/10ths.  Having set the pace in the first of the two controlled practices runs, Michal Orlowski would fail to improve on his time which was still good enough for third.  Making the biggest improvement of CP2, Marc Rheinard would jump from 7th in the first round to post P4 as the other three drivers who made up the Top 6 in the first practice were unable to better their times.

Continue reading this report here or view our full event coverage here.


September 16, 2016

JConcepts YZ-2 S2 buggy bodyshell

JConcepts YZ-2 S2 buggy bodyshell

JConcepts’ popular S2 bodyshell is now also available for the Yokomo YZ-2 2WD buggy. Featuring a low centre of gravity design the S2 assists fast corning on high-bite surfaces while offering plenty of downforce thanks to a progressive cab design that also makes for best possible steering while maintaining exceptional overall balance. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate 3 and 4 gear lay-down transmission layouts  as well as the “dirt” 3 gear stand-up configuration, giving all out versatility. The body is available in a regular and lightweight variant including the Aero rear wing.

View more images here


September 16, 2016

Orlowski sets pace at EOS season opener

Orlowski sets pace at EOS season opener

Michal Orlowski has set the pace for the first controlled practice at the Euro Offroad Series season opener at the Nurburgring.  With the track needing to be tweaked after each of the opening two free practice runs this morning, the Schumacher driver would lay down the fastest 3-consecutive lap time for the first of the two practice rounds that will determine the seeding of 2WD qualifying heats.  Super close at the top of the time sheets, Orlowski would be just .0001 of a second faster than reigning Champion Lee Martin with Martin Wollanka completing the Top 3 ahead of Neil Cragg.

Continue reading this report here or view our full event coverage here.


September 16, 2016

Redworkshop roll tuning shorty LiPo weights

Redworkshop roll tuning shorty LiPo weights

Redworkshop from France have introduced two under LiPo tuning weights that help to adjust the chassis roll by offering two different designs. At 2mm thickness the plates weigh in at 43g with the dual cutout variant making for a more centralised weight distribution while the single cutout version shifts the mass to the outer parts for increased chassis roll without the need to change roll centres or ride height. The weights are designed for the use with transversal battery layouts but they can also be used, without the chassis roll feature, with inline batteries too.

Source: Redworkshop [facebook.com]


September 16, 2016

Max Götzl sweeps Off-road Party Cup Rd6

Max Götzl sweeps Off-road Party Cup Rd6

Round six of he Czech Off-road Party Cup was held in Kolin and the race saw Max Götzl taking the TQ in both the 1/8th nitro and E-buggy classes. Max dominated the nitro finals to take his first win of the weekend and he would also come out on top of the field in E-buggy although he had some problems in the opening A-main. Ultimately he would bring home A2 and A3 for the overall win and his second title of the day.

Source: Xray [teamxray.com]


September 16, 2016

Serpent Natrix 748WC 200mm nitro kit – Coming soon

Serpent Natrix 748WC 200mm nitro kit – Coming soon

Coming soon from Serpent is the Natrix 748WC 1/10th scale 200m nitro on-road kit. Used by Dominic Greiner to win the 2016 IFMAR Worlds, the kit will include a range of upgrades and option parts such as new big bore shock absorbers, V2 gear differentials front and rear as well as larger belt pulleys and a new side belt. As for the optional parts the car will utilise rear Pro CVDs, the 25g chassis weight, rear body supports, an aluminium throttle lever as well as carbon steering blocks. The kit will hit the stores by end of September.

Source: Serpent [serpent.com]