Red RC

October 26, 2016

7075.it T4 inner brass battery stop

Italian company 7075.it have introduced an inner brass battery stop for the Xray T4 touring car. Machined from heavy brass material and attaching to the right layshaft mount the part acts as a battery stop to keep the LiPo hardcase from hitting the pinion gear or motor shaft. On top of this the part adds valuable 45g of weight in a very central part of the chassis. Using optional shims between the battery stop and layshaft mount allows to alter the weight distribution with 7075.it recommending two 2.5mm shims as starting point.

View more images here

October 26, 2016

TLR 8ight-E aluminium split centre diff mount

Coming from Team Losi Racing is the aluminium split centre diff mount for the 8ight-E series of off-road vehicles. Designed to allow for swift and easy centre differential access the set includes the lower and upper bulkhead parts that also incorporate the sliding motor mount. Part of the package are also a composite wire guide and all needed mounting hardware. The set is usable with the 3.0 and 4.0 versions of the 8ight-E buggy and also the 8ight-T E 3.0 E-truggy.

Source: TLR [tlracing.com]

October 26, 2016

2016 Race for Your Lives – Report

This past weekend Track Time Hobbies of Reno, Nevada held their annual Race for Your Lives event. Racers from as far as Arizona made the trek to Track Time Hobbies to race on the latest layout made with some of the most consistent dirt on the West Coast. Nearly 80 entries meant there would be some additional time and this would also allow for an additional 4th round of Ifmar qualifying for the racers who attended along with double A-main formats for the more heavily entered classes. Lower B-Mains were run first allowing the two bump up drivers to bump into their respective A-mains.

Continue reading the report here

October 26, 2016

Georgiadis wins at Greek Electric On-road Nats Rd4

Round four of the Greek Electric On-road Nationals was recently held at the Fanatix Racing Track in Athens. Three pretty dominating round TQs secured Georgiadis the overall TQ and thus the pole position for the triple A-mains in the Touring Car class. The finals were then a walk in the park for the polesitter as he took wins in the opening two A-mains to grab the overall victory with one leg to spare. Tamiya pilot Isaakidis and Awesomatix’s Doucakis came in second and third to round out the podium.

View the final results here

October 26, 2016

LRP-AE Challenge Italy Rd1 – Report

The opening round of the LRP-AE Challenge Italy was recently held with 70 entries for the four classes of Touring 13.5, Touring 17.5, Formula and Cinquone 299. Touring 13.5 was the most competitive category of the weekend with the top six drivers all being within two seconds. Andrea Simari would walk away with the win from Andrea Valerio who snatched the runner-up spot from fast Denny Giacomelli thanks to winning the third and final A-main. Davide Gianuzzi and Stefano Bizzoco would round out the top 5 result.

Continue reading the report here

October 26, 2016

HPI Racing Q32 Trophy Truggy micro RTR

HPI Racing’s Q32 line of micro ready-to-run vehicles is getting an addition in the form of the new Q32 Trophy Truggy. The palm-sizes truck is based off of the Q32 D8T Tessmann Edition micro truggy and it features Real Steer technology for a precise steering control and utilises a single arm front suspension and a solid axle rear end. The internal battery can be charged using the transmitter or an external USB device and the truggy is rounded out by grippy foam tyres and a pre-painted and pre-decorated truck body and rear wing.

View more images here

October 26, 2016

Exotek G.Lok gear locker & parts tray

Exotek’s new G.Lok gear locker is a handy storage case for pinion and main gears and it also acts as a parts tray if needed. Machined from high-quality 6061 aluminium and coming anodised in a range of colours the tool houses up to 9 pinion gears and one or two spur gears while keeping them away from dust, dirt, moisture and also hard targets in your pit bag such as tools or spare parts. The base is milled from a single piece of alloy so there are no pegs to assemble or come loose and the tool includes a spur gear spacer for 9.5mm hole non-slipper spur gears. The protective cover is securely held on via the threaded centre post and once removed can be threaded back on into the parts tray mode. The gear locker is available in red, blue, gun metal, orange and black colour.

View more images here

October 26, 2016

Mon-Tech reveal updated F15 1/10th formula bodyshell

Italian company Mon-Tech have introduced their updated F15 bodyshell for 1/10th scale formula cars. Compared to the previous F15 the body sports redesigned side pods and a new rear section for optimised aerodynamics and improved downforce. The changes result in more stable cornering and overall upped performance. The body comes made from clear high-quality polycarbonate and it is available now.

View more images here