Red RC

July 25, 2016

BRCA 1/10th IC Nationals Rd6 – Report

Round 6 of the BRCA 1/10th IC Nationals was held last weekend at the Cotswold track situated on Kemble Airfield. Although the sun was out in force on Saturday, Sunday was to be a more overcast affair and a total of 42 drivers took part in the three classes of 1/10th 200mm, 1/10th Sports GT and 1/8th GT. In the 200mm class, Joe Kerry would take the TQ by almost breaking the track record. Mark Green and Alex Thurston would qualify second and third with Kai Grainger and Matthew Cook completing the top half of the grid.

Continue reading the report here

July 25, 2016

Tanner Denney doubles at Dash for Cash race

The Dash for Cash race was held at Dialed In RC Raceway over the weekend. TLR’s Tanner Denney made a clean sweep in Pro Buggy and E-Buggy to walk away with a double win after also taking the TQ position in both classes. In E-Buggy Tanner was sidelined by Mugen’s Adam Drake with whom he was tie on points after the double A-mains but the tie-breaker handed Tanner the overall win while Adam had to settle for second. In third Anthony Westergaard (Tekno) completed the podium result. In Pro Buggy two runner-up spots would hand Mugen’s Adam Drake the runner-up from Team Durango’s Travis Amezcua in third. Elsewhere in 1/8th Nitro Truggy it was again Tanner to take the top qualifier position. Following a win in A1 Denney suffered a mechanical issue in A2 with the 10th place in the leg led him drop to fourth overall. Up front Adam Drake grabbed the winning honours, coming from the 3 spot, in front of Carlos Arredondo and Tyler Brown.

View the Nitro Truggy podium here

July 25, 2016

Hagberg & Viljami end season with 2nd podium

sun_pod-770x462

With new champion Bruno Coelho already wrapping up the win in A2, the final A-Main encounter of the 2015/16 Yokomo Euro Touring Series Season at the Hudy Arena would see Alexander Hagberg and Viljami Kutvonen cap of their seasons with a second podium finish. Leading away the field in A3, former race winner Hagberg would take a straight forward win to secure his first asphalt podium finish having last finished on the podium indoors at Round 2 in Germany. Having only secured his first ETS podium finish at Round 4 in Italy, Viljami was made to work a little harder for 3rd overall in Slovakia with Ronald Volker shadowing his every move before an attempted pass by Luxembourg race winner Jilles Groskamp tapped both drivers into a spin. This left Viljami to take an easy second with Yannic Prümper completing the Top 3 – a position that was to secure the VBC Racing driver 4th overall, his best result of the season. An intense battle for 4th in the leg would see Marc Rheinard punt Volker into the grass coming out of the second last corner. Crossing the line-up fourth as Volker’s Yokomo sat on the grass, the Taimya driver was later given a time penalty to put him behind Volker who was classified 8th.

Continue reading this report here or view our full event coverage here.

July 25, 2016

Coelho caps off ETS title victory with 3rd win

Having clinched the Yokomo Euro Touring Series title yesterday when he claimed his third TQ of the season, Bruno Coelho today capped off his title winning campaign with a third win. Winning one of the most static A-Mains in the ETS’ 51 race history yesterday, not one position change taking place over the 5-minutes, Coelho again headed an Xray 1-2 to wrap up an early win at the Hudy Arena in Slovakia. While up front the race was a repeat of A1, after initially looking like another 10 car procession the race came to life as Ronald Volker tagged Viljami Kutvonen as the pack backed up behind the Awesomatix driver. Surviving the tag to maintain third the Finn would later spin out at the end of the straight, him reporting afterwards he felt he got a bad set of tyres highlighting his 7th place starting team-mate Freddy Sudhoff being 4/10th a lap faster than him. While Volker, who said his car was ‘amazing’ would recover two of the positions lost after his contact with Viljami, an attempt to pass to Marc Rheinard for third ‘didn’t work out’ dropping the outgoing champion to P6. A much improved Rheinard would hold on to third followed by Yannic Prumper and the Serpent of 9th place starter Viktor Wilck.

Continue reading this report here or view our full event coverage here.

July 25, 2016

Cesiulis & Lainemae win at Latvian Cup Rd4

Round four of the Latvian Cup was held in Limbazi, gathering nearly 50 entries from Latvia, Estonia and Lithuania. In the 1/10th 4WD Buggy class, Team C driver Domantas Cesiulis took the win from Roberts Treijs (Schumacher) in second and Uģis Zikmanis (Xray) in third. Ēvalds Butāns (HB Racing) and Jānis Daubergs (TLR) rounded out the top 5 result.

Continue reading the report here

July 25, 2016

Scorpion RR-3420 17.5T ROAR-spec brushless motor

Adding to the recently announced 10.5T and 13.5T ROAR-Spec RR-3420 motor is Scorpion’s latest stock racing offering, the 17.5T. Using the same high-airflow aluminium can, screw-type 12.5mm rotor and high-quality stator and winding materials, the motor is meant to deliver exceptional power in all stock racing classes. It features gold-anodised front and back plates, a black anodised heatsink design can and the large vent openings allow to check the stator for its specifications. The motor awaits ROAR approval by the time you read this and it is available now.

Source: Scorpion [scorpionsystem.com]

July 25, 2016

Tim Jansen wins Formula class at 2016 Benelux Race

Tim Jansen wins Formula class at Benelux Race

This past weekend the 2016 Benelux Race was held at the MAC de Baanbrekers club in Rucphen, NL. The event saw the running of several electric on-road classes and in Formula 21.5T blinky, run on Ride tyres, Steve managed to take the TQ in the first three rounds of the qualifying while Patrick was on a solid P2 with three runner-up sports. In the final qualifier, run on Sunday morning, Patrick and Steve both opted not to start, allowing Tim Jansen to take the final qualifier and with it the 3 spot on the starting grid.

Continue reading here

July 25, 2016

RC-Mission introduce new T4 & BD7 optionals

Coming from RC-Mission are new optional parts for Xray’s T4 and Yokomo’s BD7 platform. First up are aluminium centre belt pulleys for the T4. Cut from high-quality aluminium the parts improve durability and also drivetrain efficiency while also being light of weight. The parts sport a silver and black anodised surface and they are a direct replacement.

Continue reading here