Red RC

May 24, 2016

Silvio Hächler wins JITC Jakarta Open

The recent JITC Open was held in Jakarta, Indonesia with the event attracting a range of international top drivers such as reigning World Champion Simon Kurzbuch along the likes of Jilles Groskamp, Teemu Leino, Silvio Hächler or Andy Moore. In the 7-minute qualifier it was Simon Kurzbuch who snatched the top spot followed by Jilles Groskamp and Jesse Davis. In the 45 minute A-main final it was a close race in super hot racing conditions and in the end Swiss ARC driver Silvio Hächler was crowned the 2016 Jakarta Open champion, followed by the Infinity drivers Jilles Groskamp and Chavit Sirigupta.

View the final results here

May 24, 2016

Xray Work.Shop Czech Republic – Announcement

Xray have announced another of their popular Work.Shops. The next one will be held this coming Saturday the 28th of May during the second round of the Czech Nitro On-road Nationals held in Slavkov. Team Xray driver Michal Abrahamek will be on hand to guide NT1 drivers through individual setup questions. More information can be found here.

Source: Xray [teamxray.com]

May 24, 2016

Adrian Wicaksono wins Jakarta Buggy regionals Rd3

The third round of the Jakarta regional Buggy Championship was held at the Graha Raya track, in Serpong, West Java with about 50 drivers attending the event. The race format was changed a bit this weekend as overnight rain made the track wet and muddy and so the triple qualifiers were cut short from ten minutes to seven minutes per run. After the qualifiers and with the two best to count it was Rama Tribudiman (Team Associated/O.S.) who took the TQ honours, but in the 45-minute A-main Adrian Wicaksono (Mugen/Reds Racing) stroke back to take the win from John Agus (Kyosho/O.S.) and Jason Nugroho (Xray/Novarossi) in second and third respectively. TQ holder Rama had to settle for fourth overall.

View the final results here

May 24, 2016

Colin Herzig takes Nevada State Championships title

The 2016 Nevada State Championships were held this past weekend at RC Tracks of Las Vegas, just one mile off the World Famous Las Vegas Strip. Kyosho America’s Colin Herzig who has been on a tear all year long would add another impressive win to his resume. With only a few minutes left in the 30-minute Nitro Buggy A-main event, it was Herzig, Dylan Rodriguez from Hot Bodies, and Yuichi Kanai, Kyosho’s lead buggy engineer, all battling it out for the top spot. As the checkered flag waived, it was Herzig crossing the finish line 1st to take the win, just one second ahead of Rodriquez who finished 2nd, and Kanai just one second back from Rodriquez for 3rd.

Thanks to Joe Pillars for the report.

May 24, 2016

Golem R-2 190mm low CG touring car bodyshell

Indonesian manufacturer Golem has introduced the Golem R-2 low centre of gravity 190mm touring car bodyshell. Designed to make for an aggressive and precise handling, the body will also up cornering speed with its overall lower centre of gravity. This was made possible by reducing the thickness of the roof section from 0.45mm down to 0.2mm. Golem have also moved the body about 4mm to the front compared to the predecessor R1 which makes for a more aggressive steering feeling. According to Golem the body is about 20 percent lighter while keeping exceptional strength in the bumper and side skirts section. As a compensation for the more forward position the body features larger and lower wing mounts to allow for a taller wing to be used while still complying with the rule books. On top of this the wing mounts were reinforced for less flex and vibration and the default wing positions is now 3mm further to the back compared to the R1 which is meant to provide less drag and more effective downforce.

View more images here

May 23, 2016

Fenix Racing DFV2 stock brushless motors

Coming from Fenix Racing are the DFV2 electric brushless motors. Building on the popular DFV the version 2 offers a redesigned can with additional cooling openings for a lower operation temperature and more consistent performance over a run. Also new are an updated stator with improved wiring and a new epoxy-balanced rotor with 5mm front bearing and improved magnetic strength. Available as 13.5T and 21.5T variant the motors are built to meet EFRA specifications with the company currently seeking homologation for the 21.5T motor to make sure it is legal to race at the forthcoming Euros.

View another image here

May 23, 2016

Arrma Nero 6S BLX brushless monster truck

Arrma have introduced their all-new Nero 6S BLX brushless ready-to-run monster truck. The 513mm long vehicle builds on a tough twin vertical plate chassis made up using red anodised aluminium which is further supported by a composite plastic exoskeleton that also acts as a support for the bodyshell. The truck is powered by a 2000kv brushless motor that is coupled to the centre aluminium bulkhead that not only sits very low in the chassis but it is also easily accessible from underneath, making for swift and easy maintenance and cleaning. What makes the Nero 6S stand out is the Diff Brain technology, a system that allows to adjust the handling characteristics of the truck by using one of the four so called Beast Modes. The servo-operated system is accessible on-the-fly using the included 2.4GHz transmitter and it offers Blast, Wheelie, Drift and Climb modes, all of which feature specific front, centre and rear diff settings. Other features of the Nero 6S include front and rear laydown shock absorbers with push rods, easy access differentials, adjustable pivot ball suspension, aluminium and steel driveshafts, and pre-glued large diameter dBoots monster truck wheels. The truck is designed for the use with dual 3S LiPo batteries and it is available with a pre-painted bodyshell and in two specifications, with or without the Diff Brain unit with the letter being available optional as an easy upgrade.

View more images here

May 23, 2016

Roche Rapide F1 2.25mm carbon fibre chassis

Roche have introduced two new option parts for the Rapide F1 formula car. First up is the new low-traction carbon fibre chassis cut from 2.25mm material and best used on slippery asphalt tracks. The chassis was tested by Roche’s Olivier Bultynck at the recent fourth round of the ETS and it is complemented by the second new part, a suitable 2.25mm carbon fibre lower pod plate. The latter is necessary to achieve a properly aligned power pod when running the 2.25mm main chassis plate.

View the rear pod plate here