Red RC

May 19, 2016

JR Mitch doubles at 4th annual JConcepts Judge race

The 4th annual JConcepts Judge race was hosted by GSHobby in the small town of Barling, Arkansas, just south-east of Fort Smith. The hobby shop has a club racing scene at the smaller indoor track which has collected a good number of local racers from around the general area. The JConcepts Judge brought all those racers back with a mix of people from out of town. In 2WD Mod Buggy the battle was between JR Mitch, Michael Twilling, Trevor Nault, Todd Sieler, and Bobby Woods. That’s how they qualified for the three A-mains on Sunday. A1 and A2 were taken by JR Mitch, leaving the battle for second between Michael Twilling and Bobby Woods. At the 3rd A main, it was Michael getting the edge over Bobby for the second overall position.

Continue reading here

May 19, 2016

Fred Santos wins Portuguese Touring Stock Nats Rd3

Round three of the Portuguese Touring Stock 10.5T National Championship was held at the fast track of Pista Das Travessas in Sao Joao Da Madeira. Fred Santos (Xray) happened to take the overall win thanks to winning A1 and A2, coming from the 2 spot on the grid. Helder Silva (Capricorn) snatched the runner-up spot from Patrick Santos (Xray) on the third spot.

View the A-final results here

May 19, 2016

Baldissarri & Tinaglia win at Italian DM Trophy

The Italian DM Trophy was recently held on the Mandorlis track in Bologna. In the Touring Modified class Daniel Baldissarri would take the day’s win from Fabrizio Manicardi who suffered from the wet qualifiers in the morning but Fabrizio was able to recover with a third, second and first place in the triple A-mains, coming from the 7 spot on the grid. Behind the two, Stefano Bettazzoni would round out the top 3 result.

Continue reading here

May 19, 2016

VBC Racing Wildfire D08 brass suspension mounts

VBC Racing have introduced three brass suspension mounts for the Wildfire D08 touring car. Available is a 10.9g FR mount, a set of 4.3g split inner suspension blocks and also an outer 9.5g block. The brass parts are around four times heavier than the standard aluminium mounts and they help to fine tune the weight balance of the car while also doing away with the need to use a large amount of unsightly stick-on wheel balance weights. The mounts are available separately and they are a direct fit on the D08.

View more images here

May 19, 2016

Avid Slop Shock O-ring lube

Avid’s all-new Slop Shock O-ring lube will provide nearly frictionless lubrication for shock and differential O-rings and doesn’t washout or swell from silicone shock oil. The lube comes in a handy 4.5ml container and also protects against corrosion while being fully compatible with the temperature range found in RC racing.

Source: Avid [avidrc.com]

May 19, 2016

Schumacher Atom GT12 centre weight

Schumacher have announced the release of a centre weight for the Atom GT12 car. Traditionally GT12 cars are underweight and the positioning of additional ballast is a great tuning aid. This new centre weight for the Atom adds 40 grams of weight straight in the centre of the car, giving a great deal of benefits to the cars performance including a lower centre of gravity and a reduced polar moment. The black anodised weight is also stronger than the kit part and makes for easier assembly.

Source: Schumacher [racing-cars.com]

May 19, 2016

Exotek 1/8 XL aluminium wing buttons

Coming from Exotek are the 1/8 XL aluminium wing buttons. The heavy-duty polished and anodised alloy wing buttons are of an extra large 22mm diameter and thicker than 1/10 buttons to securely hold any 1/8th scale wing while offering protection from crashes. They use a 3mm countersunk screw and are available in a range of colours including red, orange, blue, black and gun metal.

View more images here

May 19, 2016

TLR 5ive-B 1/5th scale 4WD race buggy kit

Team Losi Racing have introduced their all-new 5ive-B 1/5th scale 4WD race buggy kit. Purpose-designed for competition use the buggy is inspired by TLR’s 8ight 1/8th scale buggy platform and it is based on a hard-anodised 5mm 6061-T6 short wheelbase aluminium chassis. Milled pockets make for optimised flex and the lowest possible weight. The suspension package uses hard anodised 24mm shock absorbers and heavy duty aluminium shock towers. The shocks also benefit from X-rings, shock boots and TiCN shock shafts for smooth, consistent performance. The shock towers offer multiple shock mounting options that give racers an abundance of tuning options for different track conditions. Adjustable toe and anti-squat plates allow to tune the suspension geometry as known from the smaller 1/8th buggies.

Continue reading here