Red RC

February 23, 2016

Kaja Novotny dominates Czech Open Challenge Rd6

Round six of the popular Czech Open Challenge was held this past Sunday in the city of Prague. In the 2WD Buggy class Xray’s Kaja Novotny would make a clean sweep by winning all three qualifying rounds to take the overall TQ from his team mates Milan Mudra and Zdenek Miksovsky. 4WD was pretty much the same story with Kaja TQing all qualifying rounds to grab the pole position for the A-main events. Milan Mudra and Oliver Havranek completed the top 3 so far.

Continue reading the report here

February 22, 2016

MIP Ten-SCTE Roller Pucks shiny drive system

MIP have introduced the Roller Pucks shiny drive system for the Losi Ten-SCTE short course truck. Building on the design features of the MIP Pucks system the Roller Pucks utilise large diameter metal bushings in favour of the standard small diameter pins to make for improved wear characteristics as the Roller Puck material is softer than the hardened steel outdrives. Included in the set are a pair of shiny CVD bones, two Pucks outdrives, metal pucks and it is usable with the Losi Ten-SCE 1.0, TLR Ten-SCTE 2.0 as well as the Losi Ten-Rally X.

Source: MIP [miponline.com]

February 22, 2016

Cavalieri denies Maifield in epic DNC final

Ryan Cavalieri denied long standing arch rival Ryan Maifield from retaining his Dirt Nitro Challenge buggy title reversing the outcome of last year’s final to win an epic 45-minute encounter at the Fear Farm. Starting 3rd on the grid, Cavalieri would take a late lead and see off a final corner lunge by Maifield to claim his first DNC title at the Fear Farm by 1.151-seconds, his last win coming in 2010 when the race was held at the Nitro Pit. With both Cavalieri and Maifield hitting trouble in Saturday’s Truggy Main when they ran out of fuel, in Buggy it was the new Truggy Champion Ty Tessmann who was to have the bad luck as he was robbed of the race lead just after the halfway mark when a stone got caught up in a rear wheel. The race’s most winning driver, Tessmann would drag his HB back to pits and while a repeat of his 2014 double was done the Canadian would still finish on the lead lap to complete the podium at the 17th running of the Joey Christensen event.

Continue reading this report here or view our full event coverage here.

February 22, 2016

Andy North to run ARC

Zen Racing have announced that the 1/8th scale racer Andy North will join the team for the 2016 season. Andy, the current British Open Champion and veteran Mugen driver, will focus on local races this year but he will very likely return to national events soon. Andy had the following to say:

I am very privileged to be asked by Paul and especially David Spashett of Zen Racing to test the ARC 8.0 chassis of which I have accepted to race in the 2016 British racing season. I firstly have to thank Mugen Seiki Europe and especially Stefan for their direct supporting after the Ted Longshaw era of which I have been racing Mugen products for the last 14 years and since the MRX3 incarnation. I am however good friends with David Spashett and Pitman Richard Sheriff on a personal level away from racing which makes this deal even more special to me and a no brainer going forward. This year will also see me become a Dad for the first time in April so my racing will be limited to local races in the short term but I expect to complete the full championship come the end of the year since nitro racing is in my blood. I am very much looking forward to working with all the Zen Racing Team and producing good results.

Source: Zen Racing [zen-racing.co.uk]

February 22, 2016

WRC F-One adjustable friction roll damper

Italian company WRC have introduced a new adjustable roll damper for the F-One formula car. The design revolves around the inner piston that can be equipped with one to three rubber O-rings in order to adjust the friction of the damper with the single O-ring offering the least and the triple O-ring specification offering the most friction. Additional fine-tuning is possible by using highly viscous oils or greases. The damper not only fits the F-One but many other formula cars with a single roll damper.

View another image here

February 22, 2016

Mattia Collavo wins at Gara delle Frittelle race

Mattia Collavo wins at Gara delle Fritelle race

The Pista Verde track in Fener, Italy played host to the Gara delle Frittelle race this past Sunday. Classes run were 1/8th on-road 1/8th 2WD and 1/10th Touring and in the premier class of 1/8th Nitro On-road it was Mattia Collavo who set the pace after the qualifiers by taking the top qualifier position and he would also come out fastest in the A-main, scoring not only the win but also the fastest lap of the event.

Source: Novarossi [novarossi.it]

February 22, 2016

Xray XB2 brass front bulkheads

Coming from Xray and made for the XB2 line of 1/10th 2WD buggies are two brass front bulkheads. Available as 26 degree and 23/29 degree variant the bulkheads not only help to adjust the front wishbones kick-up angle, they also add 46g of weight to the front most part of the chassis which can result in more on-power steering compared to running the standard composite blocks. Both bulkheads come laser-etched for easy identification with the 23/29 degree part requiring the use of the optional 23/29 degree aluminium front arm mount.

View the 23/29 degree bulkhead here

February 22, 2016

VBC Racing WildfireD08 low CG shock absorbers

Coming from VBC Racing and made for the Wildfire D08 electric touring car is the low centre of gravity True Big Bore Short shock absorber system. The set includes four “short” shock absorbers and it was made for the use with the optional graphite LCG front and rear shock towers. The shock set includes all needed parts to build four dampers, it comes with genuine SMJ TS3.0 and TS2.8 short springs and makes for a more stable handling of the car especially in high-traction conditions.

View more images here