Red RC

August 20, 2015

Ginting & Izzah win at Indonesian EP Nationals Rd3

Round three of the Indonesian EP Nationals was held at JITC Senayan track in dusty and very low-grip conditions and in the three classes of 13.5T Boosted, FWD and Mini. In the Boosted class it was Muhammad Izzah who secured the pole position for the triple A-mains. Leg one then saw Izzah taking a comfortable win from John Ambar and Ronny Suwarto. Leg two and Bowie Ginting, who suffered from tyre failures in the qualifiers and the opening A-main, was able to pass Muhammad on the second lap and to win the main some four seconds in front of Izzah and Mamesah. The third and decisive A-main then again had Bowie Ginting taking the win after an unlucky Muhammad Izzah had to park his car due to a broken drive belt. This handed Bowie the overall win from Muhammad and Christian. In the FWD class Izzah was unstoppable and he made a clean sweep to take the win from Arya and Donny Dobu.

Click here to view the FWD podium

August 20, 2015

Arrowmax 5000mAh 110C/55C 2S LiPo battery pack

Arrowmax is the latest company to step into the LiPo battery game by introducing a 5000mAh 7.4V pack. Built from high-quality 110C/55C cells and coming in a protective hardcase the battery features “through-type” tube connectors for 4mm bullet-type plugs, making it easily usable for a range of applications including touring cars and off-road vehicles. The split-type sticker on the sides ensure that the battery looks good over a long period of time even when using strong battery mounting tape.

Click here to view another photo

August 20, 2015

Xray Team T-shirt in 3XL & 4XL sizes

Xray’s Team T-shirt is now available in the two additional sizes of 3XL and 4XL. Made from dark blue and breathable fabric the shirt sports Xray logos and graphics on the front and the back and it is now available in a total of six sizes.

Source: Xray [teamxray.com]

August 20, 2015

Losi LST electric conversion kit

Coming this Fall is Losi’s electric conversion kit for all LST-based gas or nitro trucks. Included are all needed parts to convert the truck to accommodate your choice of a monster truck compatible brushless system as are a new aluminium main chassis plate, composite side rails, gearbox halves, battery, speedo and motor mount as well as gears and hardware. The conversion will become available by mid-October.

Click here to view another photo

August 20, 2015

Exotek D413 aluminium & steel suspension options

New from Exotek and made for the HB D413 1/10th scale 4WD off-road buggy are 10 degree C-hubs, 12mm front locking alloy hexes and high tolerance flanged bushings. Starting with the castor hubs, the heavy duty 7075 aluminium and precision machined parts weigh it at only 5.5 grams per piece and they are much stronger and stiffer than the stock plastic hubs, for optimum suspension action and reduced play. They come polished and anodised in factory orange. The hubs match the stock geometry and accommodate a, not included, set screw for the hinge pin.

Click here to continue reading

August 20, 2015

Xceed rim reamer & 3-in-1 tool

Xceed have two new tools available in the form of a rim reamer for 1/8th on-road wheels as well as a 3-in-1 turnbuckle and ball cup wrench. Starting with the reamer, the tool is designed to slightly widen the wheel axle hole of 1/8th on-road wheels to make for a better fitment on the wheel axle and thus faster and more easy pitstops. The tool is made from high-quality springsteel and green anodised aluminium. Also new is the ball cup remover and turnbuckle wrench. Designed for the use with small ball cups as well as 3mm and 4mm turnbuckles the tool helps to easily pop-off ball cups from the ball joints while the stepped design of the turnbuckle portion does away with the need to carry different size tools. The wrench is made from laser-etched high-quality spring steel.

Click here to view the ball cup and turnbuckle wrench

August 20, 2015

MIP 5ive-T Super Diff Kit

MIP have introduced the Super Diff Kit for the Losi 5ive-T large scale vehicle. The multi-piece set makes for improved efficiency, enhanced durability, and less overall weight by utilising high-quality 7075 aluminium cross pins and machined alloy pin supports. The parts reduce the overall rotating mass and help with oil cooling while making for improved gear alignment at the same time. Also included are high-quality steel sun gear washers. The parts are a direct fit to the standard 5ive-T differentials.

Source: MIP [miponline.com]

August 20, 2015

JConcepts B5 series Finnisher front & rear wings

JConcepts have a range of new front and rear wing for the Team Associated B5 series of buggies available. First up is the 6.5″ Finnisher rear wing for B5M buggies. The wing features a high-attack design with trimable rear gurney options and it offers a radical, edgy design which functions and compliments the Finnisher and Silencer body design. The wing mounts low on the vehicle allowing for a lower centre of gravity which is important in high-grip conditions. The lightweight wing features reinforcement ribs to increase lateral stiffness throughout the centre while the hi-clearance areas built into the side-dams allow for rear tyre movement and growth. Cut lines are included for easy trimming while wing mount dimples are included for a drop-fit onto the popular B5M vehicle.

Click here to continue reading