Red RC

January 30, 2015

Tenshock SC211 2WD short course brushless motor

Tenshock have a dedicated 2WD short course brushless short course motor available, the SC211. Being of a 4-pole design the sensored motor is housed in a CNC-machined aluminium case with heatsink ribbing and powerful sintered magnets. Sturdy, gold-plated solder tabs make for a reliable connection of the motor and speed controller. The motor weighs in at 166g, it is available in six different Kv ratings of 3300, 3500, 3800, 4400, 4800 and 5200 and included are 12 gauge wires, a sensor cable and a decal sheet.

Source: Tenshock [tenshock.com]

January 29, 2015

Team Associated B5M Factory Lite kit

Team Associated introduce the B5M Factory Lite, a special version of the B5M that would optimise the platform to excel in classes requiring spec motors and for certain track conditions that allow the racer to take full advantage of the performance offered from reduced weight. Shedding over 75 grams of weight, the B5M Factory Lite includes a 3-gear transmission for lower rotational mass, a lightened hard-anodised aluminium chassis, titanium turnbuckles, and aluminium front axles.

Click here to view the features and more photos

January 29, 2015

Reds Racing R5T Team Edition V3.0 engine

Reds Racing introduce the all-new R5T Team Edition V3.0 nitro buggy engine. It is derived from the well-known R5T Team Edition v.2 and used by most of Reds Racing’s team drivers such as Cody King, Elliott Boots, Joseph Quagraine, Cole Ogden and others. The engine comes with the revolutionary HCX horizontal carburettor that guarantees higher idle stability, more precise tuning, easier access to high speed needle and higher mid/top range power. Furthermore, the engine comes with a special, red anodised cooling head. On top of that the R5T Team Edition features a front ball bearing with improved sealing and better durability, a redesigned crankcase with wider fins close to the exhaust for better cooling and the power plant also comes with a new combustion chamber insert and cooling head. The R5T Team Edition is hand-tuned by Mario Rossi and comes with a silicone-filled, balanced and tuned crankshaft, rear ceramic bearing, RDC hard-coated backplate, and 5-port sleeve with exhaust port booster. Before leaving the factory the engines are hand inspected and compression checked by Mario Rossi for maximum performance.

Click here to view more photos

January 29, 2015

JConcepts B5 series aluminium steering bellcranks

JConcepts has the steering system on the B5, B5M and T5M covered with an all new light-weight, aluminium steering bellcrank assembly. The servo saver-less aluminium steering system is CNC-machined and replaces the stock plastic bellcranks to provide a more rigid assembly for increased steering feel and response. Furthermore the fit of the new bell-cranks has been improved by the positioning of the bearings to help eliminate binding when assembled. The parts come in a blue or black anodised finish and sport machined chamfered silver edges and engraved JC logos. The steering bell-cranks also include two thin crush tubes which should be placed in between the bearings on the stock plastic or aftermarket aluminium steering rack.

Click here to view another photo

January 29, 2015

Tamiya TB Evo.6 Black Version chassis kit

Tamiya’s TB Evo.6 4WD shaft driven touring car kit will soon also become available in a limited edition Black Version. It is understood that the car, that features a pretty unique layout with a shaft drivetrain but a transversally mounted motor – as seen on belt-driven cars – is unchanged from the standard “blue” version apart from the black aluminium parts for the bulkheads, turnbuckles and damper parts.

Source: Tamiya [tamiya.com]

January 29, 2015

Capricorn Lab C03 hard chassis & new engine mount

Capricorn have two new option parts for the Lab C03 200mm nitro car available in the form of a hard main chassis plate and a monoblock engine mount. Starting with the chassis, the part is designed to be an option for the standard flex chassis that comes with the car kit. The hard chassis is meant to give less flex which allows to fine-tune the car to different track conditions. Also new is the monoblock engine mount that stiffens the rear part of the chassis under the engine mount area. The single piece part is of a heatsink design to assist with heat dissipation from the engine’s crankcase.

Click here to view the engine mount

January 29, 2015

Marco Baruffolo renews with RB

RB Products announce the contract extension with young double European Champion Marco Baruffolo. The 2013 Euro B and 2014 Euro A Junior Champion will run the full line of RB products including the 1/8th RB One R buggy, nitro engines, fuel and tyres and he has the following to say:

I’m very proud to continue with the RB French company, I will do my best to get some good results during this year. See you on the track.

Source: RB [rbproducts.com]

January 29, 2015

Jeff Hamon takes double Victoria State titles

At the 2015 Victoria State Titles Jeff Hamon took the win in both the 1/8th and 1/10th on-road nitro classes. Steven Jovamovic came in 2nd in the 1/8th category, Tim Westwood rounded out the podium in 3rd. In the 1/10th championship Ricky Vocale grabbed the runner-up spot from Andrew Gillespie in 3rd.

Click here to view the 200mm podium