Red RC

July 4, 2014

Updated Team C TC02C buggy coming?

Team C recently revitalised the TC02C 4-gear mid motor buggy with the introduction of a gear differential conversion kit and now the proactive Asian company shows a first image of a TC02C “Evo” bodyshell. It is understood that many Team C team drivers requested a more “conventional” mid motor buggy as the company’s TM2 in-line mid motor buggy excels on very high grip surfaces but the ever present torque steering, due to its longitudinally mounted motor, gives the buggy a life of its own on medium-bite tracks and this is where the TC02C (Evo) buggy would kick in. Previously the Evo range marked the hop-up variants of existing buggies so you can expect the TC02C Evo to sport a variety of performance and durability enhancing options. We bring you more information on what appears to be Team C’s next project as soon as they become available.

Source: Team C [teamcracing.net]

July 4, 2014

KO Propo BSX2 one10 Response & Power servos

KO Propo have two new low-profile servos available in the form of the BSx2 one10 Response (0.08s/13.3kg-cm) and the BSx2 one10 Power (0.10s/17.8kg.cm). Both are designed for 1/10th electric or nitro applications, they feature brushless motors and special aluminium gears with the Response being equipped with a plastic 1st gear. The servos are programmable via PC for further fine tuning and are usable with 6V to 7.4V input.

Click here to the other new servo

July 4, 2014

Matrix EP touring car carpet tyres

After two years of development Matrix introduce a new line of carpet touring car tyres. Carpet specific compounds will make for very high grip in combination with high durability that allows to do more than 30 runs on a set of tyres without problems. The tyres are glued on a fully automatic line to ensure reliable bonding and a high quality standard. Beside the carpet line of tyres Matrix will soon also have asphalt-specific pre-mounts available.

Source: Matrix [matrixtires.it]

July 3, 2014

Serpent Spyder SRX2 front anti-roll bar set

Made for the Spyder SRX2 line of 1/10th 2WD buggies is this front ant-roll bar set from Serpent. Using a front anti-roll bar helps to dial out steering on high traction surfaces while improving weight distribution during direction changes at the same time. The set includes a composite mounting bracket, linkages and three different diameter swaybar wires.

Source: Serpent [serpent.com]

July 3, 2014

Zagorisos takes Greek Attiko championship

The final round of Attiko championship took place after some rainy months at the FRT track in Athens. The race was postponed more than 5 times because of the weather conditions and it marked the highlight of the season as it was to decide the championship and the following 3 places. The top 4 drivers where close together in the championship and in qualifying it was last year’s champion Papanikolaou who showed great speed with the only 10 laps run. The 2nd place after qualifying went to Koudouris with Zagorisos sitting in 3rd place.

Click here to continue reading

July 3, 2014

Xray On-road GP Italy – Report

The Italian Xray On-road Grand Prix was held at the Gimar Speed Park in Lazzaro last weekend. Nearly 60 drivers signed in for the event that was run in various classes including electric touring car modified, 1/8th and 1/10th nitro on-road and 1/5th large scale. In the touring car modified class, Alessio Menicucci TQ’d the event followed by Alessandro Brunelli and Martin Hudy. The 1/10th 200mm nitro class saw Biagio Spataro taking TQ from Alessio Mazzeo and Davide Stefanizzi.

Click here to continue reading the report

July 3, 2014

Vaterra Twin Hammers rock racer kit

Up until now Vaterra was known for their ready-to-run sets but now the brand steps into the build-your-own-kit market with the introduction of the Twin Hammers rock racer kit. Based off the RTR vehicle, the kit version lets experienced modellers build the vehicle to their specifications, using the electronics and power system of their choice. It also takes the performance of the proven platform to the next level by including the option parts that have been most popular with the RTR version as there are licensed Interco Super Swamper Tyres, a front locker, heavy duty front axle outdrives and more. The kit also comes including clear body panels to provide the ability to create own paint schemes.

Click here to view the features and more photos

July 3, 2014

Roche T4’14 0.25 deg aluminium suspension mounts

Roche T4'14 0.25 deg aluminium suspension mounts

Roche introduce four new aluminium suspension mounts for the Xray T4’14 touring car. The parts offer finer 0.25 degree increments compared to the kit’s 0.5 degree parts, allowing for finer toe adjustments as well as +/-0.4mm track width changes. The parts are usable with the original Xray composite inserts and they can be mixed and matched with the original parts to achieve the setting you want. Available are FF, FR and RR 1-piece blocks as well as split CR blocks.

Click here to view the other new parts