Red RC

June 12, 2013

Truhe & Drake win at JBRL Rd3

For the third round of the JBRL Nitro Series Jimmy Babcock and the gang loaded up their equipment and headed to Revelation Raceway in Ontario, California. The Revelation Raceway has always been one of the most well know tracks in the area with the largest club race attendances. The track is home to many of the best nitro drivers in the area and people such as TLR’s and Pro-Line’s Mike True and Adam Drake can be found here club racing almost weekly when they are not traveling the world racing their cars. In the Expert Buggy Class Pro-Line’s Mike Truhe took the win with Pro-Line team mate Sean Gaffney taking the third spot on the box. Second place went to Agama’s Andrew Smolnik. In the Expert E Buggy Class Mike True did it again followed by TLR team mate Adam Drake. Wrapping up the third big class of the day was Adam Drake who took the top spot on the box in Expert Truggy followed by Drew Moller and Andrew Smolnik.

View the other podiums here

June 12, 2013

Otto Ausfelt wins 4WD buggy at Nordic Champs

Otto Ausfelt wins at Nordic Champs

The Nordic championship for 1/10th 2WD and 4WD buggies was held under the best possible weather conditions and saw TLR’s Otto Ausfelt setting the fastest practice times in the 4WD class. In the qualifiers though Xray’s Kennie Ekenstierna was able to win three out of the four rounds and he therefore took TQ after some close battles with Otto. The finals again had some close racing to offer with Kennie winning the first A final some seven seconds clear of Otto Ausfelt. The second A final went to Christoffer Svensson who came in third in A1. He had Kennie and Otto in tow. This meant the final A main would be the decider of the day as Christoffer, Kennie and Otto all had the chance to climb on the highest step on the podium and at the end Otto was able to take home the win ahead of Kennie and Christoffer. With both Otto and Kennie having one win each and second best for both was a second place it came down to looking at who had the quickest win heat – which was Otto handing him the overall in win the 4WD class.

Click here to view the final result

June 12, 2013

Austria crucial to Tamiya’s ETS title hopes

The Yokomo Euro Touring Series reaches a crucial stage this weekend (June 14-16) in terms of the title chase between Yokomo and Tamiya as Traiskirchen in Austria hosts the penultimate round of the World famous electric touring car championship. While defending champion Ronald Volker leads the current Ride Modified standings from Yokomo team-mate Yannic Prumper, a recent upsurge in the performance from the Tamiya Racing Factory team that yielded victories at the last two rounds has put their two drivers back into contention for the prestigious crown. However the pressure is on Marc Rheinard and Viktor Wilck to continue that form this weekend if they want to go to the season finale at the Hudy Arena in Slovakia in July with a chance of the title.

Continue reading the announcement here

June 12, 2013

FX Engines inside story

Having recently broke cover, new engine manufacturer FX Engines, which is owned and operated by the Hudy family, have made available a nice insight into the production of their first engine. Unlike some other engines brands, the Slovakian power plants are completely manufactured in-house in Europe in order to have full control over the design and the materials used. Started some six years ago, designer Juray Hudy not only changed every piece of the engine multiple times but also twice re-started from scratch to make sure the engines met the company’s strict demands in terms of quality, performance and reliability. To find out more about the history of FX Engines and the production of their very first engine click here (PDF) to download the story.

Source: FX Engines [fx-engines.com]

June 11, 2013

DE Racing 1/8th & 1/10th setup wheels

DE Racing introduce their new setup system for many 1/8th and 1/10th scale off-road vehicles. Based around a set of flat surface wheels with a rubber layer the system ensures high accuracy when measuring ride height, camber and toe settings. The wheels are available in two diameters for 1/10th and 1/8th buggies with the latter are also perfect for 1/10th short course trucks. A wide range of adapter hubs ensures that the wheels are usable on virtually every off-road vehicle. The rubber layer on the wheels not only makes for a secure stand on the setup board but also helps to recreate the geometry of the car against the grip of the rubber tyre to lock the wheels into a proper position for checking camber and toe.

Click here to view more photos

June 11, 2013

Xray XB4 white Aerodisk wheels

Xray introduce their Aerodisk wheel value packs for the XB4 off-road buggy. The rims come in white colour, are designed for 14mm hex adapters and are made of a flexible yet durable material. They come as sets of five pairs as narrow front and wide rear wheels.

Click here to see the rear wheels

June 11, 2013

2013 Much More Masters – Report

The 2013 MuchMore Masters was run over three days at the SMA club in NSW. Once again SMA presented an awesome track that seems to be getting better and better every time. Open practice of the Stock class on Friday started slow, with rain the night before creating a cold low grip surface. The early runs were spent tuning the motor and ESC for the upcoming power battle in 17.5 boosted that would follow, the cooler temps allowing everyone to push the motors hard. In the afternoon the track warmed up and the grip came up with it. The teams spent quite a bit of time testing out different ideas for preparation with the new MuchMore Rush tyres that we would be using for the event. These tyres were new for Australia and were under a lot of pressure to do well.

Click here to continue reading

June 11, 2013

Yuki Model Yakuza Boss brushless set

German company CN Development & Media introduce the Yuki Model Yakuza Boss 1/8th electric brushless set. Included are the SD 160A sensored speed controller and either a 68mm long 2250kv motor or a 74mm variant with 2150kv or 1750kv. The controller offers a heavy duty BEC system with an adjustable output voltage of 6V or 8.4V and a current of 3A meaning high voltage compatible steering servos are useable without an additional receiver battery pack. Included in the sets are a LCD programming card, 5.5mm gold-plated bullet-type connectors, a sensor wire and a 19T pinion gear.

Click here to view the specifications