Red RC

August 15, 2013

John Myall wins 4WD at East of England champs

The 2013 East of England BRCA championship climaxed with an epic battle in 4WD last weekend. Both champion and vice champion spots were up for grabs, and John Myall was defending one and vying for the other. A tight qualifying saw a joint TQ from Ben Hubbard and John Myall with both achieving two 1st in rounds. John, a new addition to the X-Factory team, had a choice of 4WD chassis and opted for the Durango DEX410. Going to count back, it was the faster time John set that gave him pole and secured a minimum of vice champion spot. Now it was just between John and Rob York for top spot on the day and subsequently the championship. After three legs of hard fought battles between an evenly matched A-Final group, it was John who took the win and the championship. With over 83 drivers competing in the East of England series, it is now recognised as a championship worth contending.

Click here to view the top 3 championship result

August 15, 2013

Ronnefalk wins Swedish 4WD buggy title

Last weekend the Swedish 1/10th electric off-road championships took place in Falun. At first it looked like the race had to be cancelled due to the weather but the rain soon stopped and the club did a very good job to dry and prepare the track for racing. Due to the delay there was no time for practice anymore and qualifying started right away. In the 4WD class Kyosho’s David Ronnefalk scored the only 16 lap run handing him the TQ in this round using Kyosho’s new 4WD prototype buggy. Some three or four heats into the second round the rain started again and brought racing to a halt but it soon cleared up and the race resumed with round number three and four with the latter being again won by David who suffered time keeping problems in round three so TQ’ing the final qualifier was vital for a good starting position.

Click here to continue reading

August 14, 2013

Rivkin & Fiege win at ROAR 10th electric off-road nats

The 2013 ROAR 1/10 Electric Off-Road Nationals visited Silver Dollar Raceway in Chico, California to determine the top drivers in North America. Seven classes were scheduled to compete on the hard-packed Silver Dollar surface with a newly installed track configuration designed specifically for this event. Track guru Kevin Jelich designed the layout, which incorporated challenging obstacles and jumps, including several elevation changes, off-camber turns, and varying track widths. It became clear early on that driving skill, setup, tire choice, motor/battery choice, and ESC setup would all play important roles in the final outcome.

Click here to continue reading

August 14, 2013

2013 Keilor Cup Rd3 – Report

The 3rd round of the popular Victorian Drivers Series was held at the Keilor Club in Melbourne on the 11th August. The Keilor track crew worked hard to get the track ready after a week of heavy rain and come race day, the track was perfect with a groove forming. Over 150 entries were received for this 1 day event making for a long day with full fields in all classes. The modified fields in particular were stacked with 30 entries in both 2WD and 4WD open. With no less than six previous national champions in the field, just making an A-main was going to be tough. JConcepts were well represented headed by Factory driver Ray Munday (JC/AE/Novak/Reedy), Glen Bonetti (JC/AE) Ash Peeler (JC/Kyosho), Glen Bonetti (JC/AE), Leigh Cheeseman (JC/Schumacher), John Watkins (JC/Xray) and Scott Giles (JC/Schumacher) ready to take it to the rest of the field. This included multi-time national champ Matt Griffin (Yokomo), Ben Sterling (Kyosho), touring car ace Ryan Maker (Kyosho), Welsh star Jody Denner (Yokomo), Mark ‘Paris’ Rodgers (AE), Tasmanian Sam Wells and Scott ‘The Hot One’ Rawlings (Yokomo).

Click here to continue reading

August 14, 2013

RB One R V2 2013 buggy kit

German RB distributor RMV Deutschland have information of the updated RB One R V2 2013 kit available. The new V2 version comes with a load of redesigned parts such as a new hardcoated 7075-T6 aluminium chassis plate, new differential cases, a new rear gearbox with redesigned aluminium suspension mounts and a longer rear centre driveshaft. Complementing the upgraded rear section is a new carbon fibre shock tower with updated mounting points. The steering also received a make over and now features a revised geometry, new servo saver and new Ackermann plate while the centre bulkhead is equipped with a new brake eccentric, linkage and discs. The updated variant of the EFRA Euro B winning car is available soon.

Click here to view more photos

August 14, 2013

Kim Sitensky doubles at German truck nationals

The German electric truck nationals took place at the astro turf track of the RCSF Singen last weekend. Run in 1/10th 2WD racing truck and 2WD short course truck the drivers were faced with a fast and flowing layout ideal for mid-motor vehicles. Kim Sitensky (Kyosho) was the man to beat after dominating the practice and qualification he found himself on pole position in both the racing truck and SC class. Local hero Swen Lauber took the second spot with Florian Eberhard owing the third spot in the truck class after qualifying. In SC Christian Geier placed his Associated truck in second place with Florian Eberhard in tow. Come the A final of the racing truck class Kim made for an early decision by winning the first two A finals in style handing him the 2013 racing truck title early. The runner-up spot went to Swen Lauber, Dirk Endres completed the podium.

Click here to continue reading

August 14, 2013

Smokem Racing TC6MX carbon chassis

SmokemTC6MX-1

Smokem Racing introduce this optional carbon fibre chassis for the Team Associated TC6 and TC6.1 touring car. Called the TC6MX the chassis offers additional flex, delivering more grip and a wider tuning window. This allows the driver to dial-in the car over a wider range of temperature and track conditions. The 2.25mm thick chassis features distinctive curved shoulders that enhances the flex characteristics of the chassis compared to the stock TC6 and TC6.1 designs. As a result, the TC6MX delivers unparalleled handling response during quick direction changes and turn-in, while maintaining maximum stability on corner exit.

Click here to view another photo

August 14, 2013

Serpent Cobra 811-E radio tray & battery straps

Serpent release new option parts for the Cobra S811-E line of electric buggies on the form of a light radio tray set and optional carbon fibre battery straps. Starting with the radio tray, the set is made from CNC-machined aluminium and carbon fibre and targets the hardcore racer who wants to reduce the vehicle’s weight and add an amount of rigidity while having easier access to the electronics. The set includes a machined aluminium steering servo mount, carbon fibre speedo mount plate, carbon fibre diff cover with aluminium top-spacer, and two 2.25mm carbon fibre battery-braces, which allow the use of slightly thicker LiPo packs. An aluminium antenna mount is rounding out the package. The parts are designed to fit all electric 811-series vehicles including the competition and RTR variants. The included carbon fibre battery braces are also available separately to upgrade existing kits.

Click here to view more photos