Red RC

July 27, 2013

Martin Bayer wins 2013 4wd Euros

The 1/10th EFRA European Electric Offroad Championships took place in Spain last week and Martin Bayer wrote this report. ‘Immediately following a successful week of 1/8 off-road racing, I traveled with my teammate Reno Savoya to Spain for the European Electric Off-road Championships. The race program started with the 2WD class. We were using a 2WD prototype buggy based on the XB4 1/10 4WD offroad buggy. The car felt very good, but the track proved difficult with many low traction areas. I worked diligently during my free time to continuously improve my set up. After qualifying was completed, I was sitting in 8th position. I was quite pleased with this result considering it was my first race using this prototype on clay.

Continue reading the report here

July 26, 2013

Mark Green is 1/8th Euro A top qualifier

Mark Green is the top qualifier at the 2013 1/8th European A Championships in Halifax. The Serpent driver pulled everything he had out of the bag in the last round of qualifying to take the TQ by 0.14 seconds from Capricorn’s Dario Balestri who held the accolade after the first 4 rounds. With Balestri fastest in the first qualifier, Jilles Groskamp topped the 2nd round with a run of 21 laps in 313.00 seconds ahead of Balestri and Green. With the clock approaching 12:00 at the time of the run, the track proved to be too slow. In the 3rd round, Mark Green took his serpent to the fastest time ahead of Capricorn’s Daniele Ielasi and Mugen’s Kyle Branson. Posting a time of 21 laps in 314.18 seconds, Green again proved that the track was too slow. After the lunch break Round 4 commenced and again Groskamp posted the fastest time to improve by around a second ahead of Dario Balestri and Mark Green hinting ever so slightly that the track was picking up pace as the sun started to go down. With almost every heat prior to the top heat going faster in the final round, the stage was set for something special to come. Dario Balestri would lead for the majority of the heat only for Mark Green to close him down and take the round on the last lap to the joy of the crowd. The stage is set for an exciting set of finals tomorrow.

View the final qualifying results here

July 26, 2013

Maifield wins big at Summer Indoor Nationals

For the 4th consecutive year, the summer racing scene turns to Chico, California, for one of the largest indoor races in California. The JConcepts Indoor National Series arrived for its 3rd stop on the one of a kind U.S. based National Series. Defending INS champion Steven Hartson was in attendance along with 2013 National points leader Ryan Maifield. The Team Associated duo was set to do battle against the likes of Kyosho’s Cody Turner and TLR’s Phillip Atondo. As a twist, Maifield entered an additional class bringing 4 vehicles to the event to shake things down for an upcoming busy summer schedule.

Click here to continue reading

July 26, 2013

VBC Wildfire D06 touring car kit

Not long ago VBC Racing released teaser shots of the Wildfire D06 touring car prototype and now the company officially introduce the new kit. The car is based on the current Wildfire chassis that received a huge overhaul and comes with an all-new motor mount design moving the motor to the centre line and in a more forward position for increased corner speed and agility. Also new is the chassis assembly that allows for a more linear flex characteristic with improved weight balance. And not only the chassis and drivetrain received a make-over, the wishbones are of a new stronger design and the kit comes with low-profile shock towers and “true big bore” shock absorbers that are shorter but larger in diameter retaining the large volume of the original shocks with the benefits of a lower centre of gravity. Included in the kit that is meant to hit stores at the end of August are also a new design “floating” servo mount and a genuine Panaracer spur gear.

Click here to view the features and more photos

July 26, 2013

Team Associated RC10 classic kit

In celebration of the 30th anniversary of the original RC10 Team Associated soon release the RC10 Classic Kit, a faithful reproduction of Roger Curtis’ world championship-winning design. The kit comes with the iconic gold colour aluminium tub, short arm front suspension, gold colour aluminium shocks, VariLok ball differential and 3-piece clamping wheels. Just like the original the Classic Kit comes with adjustable camber and steering rods, the original design Protech body shell and rear wing as well as front rib and rear knobby tyres. To make sure the RC10 is 2013-ready it features an updated battery mount to take not only NiMH but also LiPo battery packs.

Click here to view more photos

July 26, 2013

Hara, Kanai & Vejrak confirmed for FEMCA Champs

2013 FEMCA Championships - Announcement

The organisers of this year’s FEMCA Championships for 1/8th buggy and 1/10th ISTC in Beijing, China, which take place from the to the 18th to the 28th of August, have been in contact to tell us that they have confirmed entries from 3 World Champions. Firstly former World 1/8th Offroad World Champions Atsushi Hara along with Yuichi Kanai will be in attendance, while current 1/10th scale World Champion Meen Vejrak will also attend. The offroad event will be held on a new permanent facility and Red RC will be attending the offroad portion of the event to cover it live. Entries are still open and you can find out more information here.

July 26, 2013

Yokomo B-Max2 optional parts

YokomoBMAX-AlloyChassis

Some weeks ago Yokomo announced new option parts for the B-Max2 line of 2WD buggies and now the parts are available for pre-order. Starting with the aluminium main chassis kit for the B-Max2WR and RS, the set is designed to improve both chassis stiffness and handling performance over the stock composite chassis. Featuring a hybrid construction and moulded plastic side pieces that are used to provide space for the electronics. Next up are two graphite battery holders that provide weight savings as well as improved pitch stiffness. Available for mid and rear motor cars the part also includes all needed mounting hardware and aluminium thumb screws. Designed to improve the rigidity of the front end are the narrow front upper arm mount and the front lower suspension mount. Both parts are available separately, CNC-machined from aluminium and they improve the feeling of the front end by adding weight. Those who want to improve the steering feeling of the buggy may like the aluminium steering bellcrank set. Included with the CNC-machined and blue anodised parts are four ball bearings to make for virtually frictionless steering action. The parts are more rigid than the stock moulded composite levers and offer rock solid cornering performance.

Click here to continue reading

July 26, 2013

On the Grapevine – Trencin

I have had the opportunity to visit many great, and many more not so great, r/c venues around the world and have vivid memories of my ‘wow’ reaction on entering the world famous Yatabe Arena in Japan and the mammoth Mike’s Hobby Shop in Texas. Last week however arriving at the season finale of the Yokomo Euro Touring Series in Slovakia, the Hudy Racing Arena evoked a reaction that is best not put in print. From the time we pulled up in our rental car at the main entrance barrier this place was making a lasting impression. We were greeted by the first of two car-park attendants the second of whom directed us into our parking spot. On entering the building itself the usual handshake and ‘hello’ greeting from drivers and their entourage had been replaced with ‘this place is amazing’, ‘unbelievable’ and ‘mind-blowing’ and that is exactly what the Hudy Racing Arena is.

Continue reading On the Grapevine here