Red RC

May 6, 2013

Evens & Robert win Belgian SCT Cup Rd1

The first race of the Belgian SCT Cup 2013 has been held on BRTC track last Sunday. The layout of the track has been changed for this year and is now faster than before while still being challenging and offering very low grip. The number of entries is progressing compared to last year, with the participation of some fast buggy 1/10 racers and most importantly, young newcomers. They also had the pleasure to welcome a French driver coming all the way from Paris, Philippe Hautecoeur. The day started under the sun with pastries and coffee available on site. In 2WD qualification, tire choice proved to be pretty complex with drivers changing them each run in search of the best compromise. Martin Vierin put in the fastest run of the first run on his SC10 in front of Nicolas Evens (TLR 22SCT), Jean-François Renard (TLR 22SCT), Philippe Hautecoeur (SC10) and Julian André (SC10). Second run saw Nicolas take the advantage ahead of Jean-François, Philippe and Martin. Last run was decisive for the pole position attribution with Martin and Nicolas with a win each. Nicolas took that leg in front of Martin, Cédric Van De Ginste (SC10) and Jean-François.

Continue reading the report here

May 6, 2013

Silvio Hächler wins Swiss EFRA GP

Last weekend the Swiss EFRA GP was held at the famous Lostallo track, but this time run in the opposite direction to normal. The track is really big with a very long straight and so it would be really hard to run the 5 minutes without a pit stop. After a wet Friday it was a sunny Saturday allowing for some nice racing. At the front the tactics were really different, Simon Kurzbuch, Claudio Paquin and Remy Hasler the 2nd till 4th from qualification did their runs all without a pit stop, the only one who was able to top this time was Silvio Hächler with fast runs including one pit stop.

Continue reading the report here

May 6, 2013

Ty Tessmann double at ROAR Nats warmup race

The warmup race for the 2013 ROAR Fuel Offroad nationals took place last weekend at Gulf Coast Raceway’s covered track in Texas. Not all the factory teams were present but defending National champion Ty Tessmann was there along with other former National Champions, Worlds finalists and quick locals. Qualifying was all about HB driver Ty Tessmann, taking the top spot in both buggy and truggy. In the hour long buggy final Tessmann would take a clear win by nearly 2 laps ahead of TLR’s Adam Drake with Barry Pettit completing the podium. The 30 minute truggy final would see the same result this time with Ty nearly a lap ahead of Adam, with Pettit only 6 seconds back in 3rd.

View the final results here

May 5, 2013

Exotek RB6 spring perch sets & suspension hangers

Exotek have released some new optional parts for the Kyosho RB6. First up are these machined and anodized alloy spring perch sets for the Kyosho big bore dampers. Extra milling for a lightweight design but the reinforced strength of quality CNC cut aluminium. Milled holes also help reduce debris from collecting inside. Available in red or black. Also for the RB6 are these heavy duty suspension hangers. Precision cut from high strength 7075 and finished with a polished anodizing they come in black or red for the rear and front of the rear lower suspension. Available in RR, RR2, RF & RF2 versions.

View the suspension hangers here

May 4, 2013

Daniel Sarmiento wins Philippine Offroad Nationals

Racers from all over Metro Manila as well as Cebu and even Riyadh descended on the CV Off-Road Track for The 2013 Nitro Buggy Philippine National Championships. Early in the morning everyone was greeted with fine & sunny weather. World renown Race Organizer & Announcer Scotty Ernst was on hand to as the event’s Race Director. His colorful commentary added even more excitement to what would be an already amped-up Race.

Continue reading the report here

May 4, 2013

Bernhard & Salven win Rd2 in West Germany

Last weekend MCK Dormagen was host for the 2nd round of the West-German championships and Daniel Thiele gave this report. ‘As already seen 2 weeks ago at Rd1 in Bad Breisig, 1/10 and 1/8 were driven on the same weekend. With 30 drivers in 1/10 200mm and 40 in 1/8 class 1+2, it was a really interesting weekend. On Saturday we started with a basic setup with the team working really close to work out the best setup as possible. Due to the high amount of starters and the difference in performance between 1/8 and 1/10, the race director decided to divide training into time block of 20 min. each.

Continue reading the report here

May 3, 2013

Tim Wahl joins Xray factory team

Xray have announced that German multiple junior champion Tim Wahl has joined the Xray factory world racing team. Tim has been a young talented driver who has showed in the last years excellent results and permanent growth. Tim and Xray have joined the forces for the 2013 season to achieve the best possible race results at German and international events. Tim will race the T4 platform and will participate all major international races. Tim had this to say:

I have been racing with Xray since 2006 and now I’m really happy to be a part of the Xray factory team. It is the chance to learn a lot from the other guys in the team and improve both my skills and results. The working atmosphere in the team is great and I really like how we push each other forward. I’m really looking forward to a successful year 2013 with the Euros and the ETS races. I would like to thank Xray and SMI for the support and the trust in me.

Source: Xray [teamxray.com]

May 3, 2013

Protoform Chevy Camaro ZL1 shell

Protoform is proud to release its rendition of the Chevy Camaro ZL1 for your 190mm r/c touring car. USGT Class racers, R/C drifters, and all-around car guys alike will love the powerful stance, exceptional detail and add-on rear wing with injection molded struts. This officially licensed product is produced in genuine .030 Lexan material and comes with protective overspray film, window masks, detailed decal sheet and hardware to mount the struts and wing.

View more images of the ZL1 here