Red RC

April 22, 2011

Kyle Branson wins first round of BRCA 200mm Nationals

Reigning British Champion Kyle Branson, who had been busy attending the 1/8th Worlds in Miami, sent us this report from the first round of the BRCA 1/10th 200mm nationals was held at the end of March in the Cotswoulds district. The weather forecast looked promising for the weekend, the sun was shining Saturday morning which looked set to be a really nice day. The traction levels were not too bad to start off with, but with plenty of cars going around the track it soon increased. During practice on Saturday most of the top drivers was separated by a few tenths setting up the scene for some close racing for Sunday.

Continue reading the report here

April 21, 2011

RPM Shock Shaft Guards

RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, they redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure. These guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. Sold in sets of four they will fit the Slash 2wd and Slash 4×4 as well as other Traxxas vehickles. Available in Black, Blue and Dyeable White materials.

View the black guard set here

April 21, 2011

Traxxas Slash 2wd Chad Hord edition

Traxxas have announced the release of their latest replica truck, the Boss Snowplow Pro 2wd of Chad Hord. This ready to race truck is supplied with a TQ 2.4Ghz radio system and Power cell 7-cell NiMh battery. The base is the same high quality truck from Traxxas with Titan 12-Turn 550 modified motor, XL-5 waterproof electronic speed control, water-sealed receiver box and steering servo, metal gear Magnum 272 transmission and Revo-spec torque-control slipper clutch but with the familiar racing colours of Chad Hord.

Source: Traxxas [traxxas.com]

April 21, 2011

Hupo Honigl dominates 2wd at Austrian opener

The first round of the Austrian 1/10th off road nationals was held last weekend in Simmering, Vienna home to the 2003 European Championships. Hupo took his DEX210 Prototype to a comprehensive victory. Hupo took all four qualifiers to secure overall TQ and set about the finals in the same manner, taking both opening legs of the A-Main to take the win. Hupo took 3 out of the 4 qualifiers in the 4WD class with his DEX410 for the TQ position and #1 for the finals. An amazing series of finals which saw battles with fellow Team Durango star Martin Kriel for the lead. Hupo needed to take the last leg of the A final to take the win and lead by 4-5 seconds until close to the end when a bearing failure cost him the win. Team Durango DEX410s finished 2nd, 3rd and 4th.

Source: Durango [team-durango.com]

April 21, 2011

Associated high-torque slipper pads

Associated have introduced their new high-torque slipper pad design with maximum surface area for more torque capacity. It allows for adjusting drive torque bias on the SC10 4×4 using the included decoupled slipper and is recommended by team drivers for the SC10 4×4 outer slipper pad (rear drive) for more rear drive out of corners and for jumps. Suitable for the SC10 4×4, SC10 FT, B4.1 FT, T4.1 FT, B44.1 FT and all older generations of SC10, B4, T4, B44.

Source: Associated [rc10.com]

April 21, 2011

Team Orion Vortex MR8 & MR8L motors

Team Orion have released their all new Vortex MR8 and MR8L 1/8 sensored brushless racing motors. Equipped with sensors for perfect throttle control and a 4 pole rotor for improved performance, they come in two versions, regular length for buggies and XL for truggies and monster trucks. Available in 1750 KV, 1950 KV, 2100 KV, 2400 KV, L 1500 KV, L 1750 KV, L 1950 KV L 2100 KV and L 2400 KV versions.

Source: Team Orion [teamorion.com]

April 21, 2011

Pedro Rombouts wins Rd1 of Dutch 1/10th Nats

This season’s Dutch 1/10th scale nationals kicked of at the noise-troubled MACH track, close to Amsterdam. Although the MACH is no longer able to host the EC-B because of noise restrictions, the national was able to be run due to the lower number of attendees and the Kyosho KWC class, which joins the nationals this year, making less noise. Saturday’s training was influenced by sound measuring to get the national drivers below a certain noise level.

Continue reading the report here

April 21, 2011

CSO blue set up wheels

CSO have released their aluminium easy set up wheel for 1/10 EP and 1/10 GP cars in Tamiya blue. Specially designed so you don’t need to use your wheel nuts to fix the set up wheel, it features an o-ring around the outer circumference to protect your working surface.

Source: CSO [cso.com.hk]