Last weekend the 3rd round of the Dutch nationals was held on the Raco track in Utrecht. Last year it was the 1st time after almost 20 years to race on this track again and Ilia v. Gastel set the first lap record of 13.937 sec. This time it was clear the track was a lot faster and so new lap records could be expected.
Continue reading the report here
This last weekend saw the 3rd round of Swiss 1/8th scale on road Championships run in Herblingen and we received this report from Mattia Pesenti. We arrived at the track on Friday at 12 and it was wet, but it dried very fast so at 3pm we could practice and I had a very good feeling with my Motonica. Unfortunately Saturday morning the rain came again and so I had to setup my car for the wet. I lost the first qualifier but in the second round I did a very good time placing me in 3rd position and as the rain stopped so the track become faster. However I couldn’t do better in the 3rd round but in the last one I put on different tyres and I was really fast and managed to take the pole position.
Continue reading the report here
The 4th round for the 2010 Hessencup was held in Bischofsheim from last weekend and attracted 75 drivers. Saturday was controlled practice and 1 round of qualifying with another 2 rounds for Sunday. LRP driver Jörn Neumann took TQ, followed by Alex Hardt in 2nd and Tim Bremicker in 3rd. In the extended 40min main final Jörn took the win with his LRP car, in front of Associated driver Tim Bremicker in 2nd, 1 lap back, with 3rd place going to Gerhard Frank 2 laps back driving a Kyosho.
New from Litemodz is their Pro and Pro X CVAs available for the Schumacher Mi4LP, Team Associated TC5, Tamiya 416X, Xray T3, Corally PHI, Yokomo BD5 and T.O.P Photon. The Pro Edition CVA’s feature hard anodized black driveshafts and lightened high tensile steel axles. Developed as an upgrade offering super high strength, the high tensile steel axle has been centre bored to reduce overall weight and so a complete set of driveshafts weighs in at 14 grams a pair. The Pro X Edition CVAs feature hard anodized black driveshafts and axles and are a super light upgrade offering maximum performance through the reduction in weight. A complete set of driveshafts weighs in at only 10 grams a pair.
Click here to see the Pro X CVAs
Xray have released these precision axial thrust bearings in 3x8x3.5mm for ball diffs and 5x10x4mm for their XCA clutch, featuring ceramic balls. The highest-quality materials and design guarantees the smoothest operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic, which significantly improves lifespan while reducing friction and vibration. Higher RPM capabilities.
Source: Xray [teamxray.com]
This new sintered rotor from LRP is a tuning option for everyone who uses the successful X12 Stock Spec brushless motor in an 1/12th chassis with 1S LiPo for example. The new 12.25mm sintered 1S StockSpec rotor claims to boost the efficiency and power performance of your brushless motor to a completely new level.
Source: LRP [lrp.cc]
The Savage Flux 2350 from HPI takes the basher-proven features of the Savage Flux HP and optimizes the performance for the popular 4S LiPo battery configuration. The result is faster speeds on 4S at a price significantly lower than the Savage Flux HP. Not only is the Savage Flux 2350 faster than the Savage Flux HP on 4S, it’s also faster than the fastest nitro Savage. Easy plug-and-go convenience is the hallmark of electric RC vehicles like the Savage Flux 2350. Just plug in two matching battery packs and you are off and running! The Savage Flux 2350 is clean, quiet, easy to use, and blistering fast.
Source: HPI [hpiracing.com]
Model Race Genk vzw. in Belgium have been in touch to tell everyone about the BeNeLux championships which will be organized on their new track in Genk from the 24th to the 25th of July. This race is driven in 2 classes, 1/8th and 1/10th 200mm, following EFRA rules for the technical specifications and the race organization. The all new 287 meter long track is built to an internationals spec and so features all the facilities you should expect from such a venue. Entry is now open and you can find out more information here.
