Red RC » P Off Road

December 9, 2019

Alexander Landen wins 2WD Mod at Lucia race

The Boras Miniracing club of Boras, Sweden held the Lucia race this past weekend with more then 50 drivers in attendance. In the 2WD Modified class it was Alexander Landen with the overall TQ after winning three of the four qualifying rounds, leaving behind Hampus Berg in 2nd and Pontus Larsson in 3rd. Nils Gustaffson won the final qualifier but had to settle for P4 on the grid. In the opening A-main Alexander and Nils initially pulled away and Alexander was able to create a gap as well. A small mistake on the jump section let the other drivers close in, but Alexander never lost the lead and after he was able to stretch the gap again he was able to take a comfortable win ahead of Hampus and Nils.

Continue reading here

December 9, 2019

Ryan Lutz doubles at 25th Lonestar Classic

Indy RC World of Garland, Texas played host to the 25th Annual Lonestar Classic race this past weekend. The event attracted 250 entries and it was Agama’s Ryan Lutz with the overall TQ in the Expert Nitro Buggy class from Serpent’s Brandon Rose in 2nd. The 45-minute A-main event then again had Ryan leading the way as he took the win a lap in front of HB Racing’s Dillon Caldwell as Jake French (HB Racing) completed the top 3 result another lap down. Tekno RC’s Tyler Hooks and Team Associated’s Brian Rohde would finish in 4th and 5th respectively.

Continue reading the report here

December 9, 2019

Phend & Jones win at TLR Winter Championship Series

The Team Losi Racing Winter Championship Series was held at RC Fun Park in Granger, Indiana with 170 entries for the several electric off-road Modified and Stock classes. In the 2WD Modified Buggy class it was TLR’s Dakotah Phend with the overall TQ and he would also sweep the single 10-minute A-main event, leaving behind runner-up Charlie Maiorana (TLR) in 2nd, a lap down while Tater Sontag (TLR) came in 3rd to round out the podium.

Continue reading the report here

December 9, 2019

SWorkz S12/S14 Black Competition shock springs

SWorkz have introduced their new Back Competition line of 1/10th scale off-road springs. The design of the springs makes for a more linear performance, improving the vehicle’s jumping, landing and corner speeds, event in bumpy track conditions. The springs, that are usable for SWorkz’s S12 2WD and S14 4WD lines of buggies, come with laser-engraved markings for easy identification and they are available in three hardnesses for the front and rear each.

View the other springs here

December 6, 2019

Avid NB48 2.0 carbon fibre shock towers

Avid have announced the release of their new carbon fibre shock towers for the Tekno RC NB48 2.0 buggy. The 5mm carbon shock stays are made from 100 percent carbon fibre, they feature a matte finish and cutouts for a nice look. In addition they are slightly chamfered on the front side to help avoid splitting or chipping on hard wrecks. They mimic the standard suspension geometry and remove about 33 of weight compared to the standard aluminium towers. The front and rear towers are sold separately or as a set.

View more images here

December 6, 2019

LapMonitor introduce new waterproof transponder

LapMonitor have introduced a new transponder for its popular lap counting system. The new variant is fully compatible with the LapMonitor decoder and it can be used with up to 96 cars on the same track. The transponder is now water resistant and weights only 5g for the Molex connector version and 7g for the variant with a universal receiver plug.

View the Molex connector variant here

December 6, 2019

WRC Racing SBX.1 1/8th nitro off-road buggy

Following a couple of teaser images on social media, WRC Racing from Italy have finally lifted the curtain and officially unveiled their all-new SBX.1 1/8th nitro off-road buggy. Known for their popular on-road kits, the SBX.1 buggy is a first for the company and it builds on a 7075-T6 aluminium chassis that is designed to adapt the vehicle to a wide range of track conditions. The drivetrain is equipped with CVD driveshafts throughout, it features an industry standard 3-differential drivetrain with hardened lightweight outdrives and included in the kit is also a 7075-T6 aluminium clutch with captured clutch bell. The designers adopted a pivot ball front steering knuckle setup for the suspension that allows a wide range of adjustments including caster, camber, upper roll centre, bump steering as well as track width. Front and rear arms are side to side interchangeable, and it is possible to choose three different hardness materials for each one, hard, medium or soft. The rear hubs are designed in order to allow a variety of upper camber link positions and to allow the adjustment of the upper and lower roll centre, camber gain and more. Other features of the buggy include front and rear 7075-T6 aluminium shock towers to which mount big bore shock absorber. The buggy is decked out by a cab forward body shell and it will become available very soon.

View more images here

December 6, 2019

Xray XB2’20 aluminium front roll centre holder

Coming from Xray and made for their popular XB2 platform is an aluminium front roll centre holder with integrated anti-roll bar mount. The part is a replacement for the standard composite mount and it adds strength and durability while making for a more precise yet forgiving handling. Machined from Swiss 7075-T6 aluminium and coming black anodised for wear and looks, the part also incorporates an anti-roll bar mount while offering three different camber link ball stud mounting positions. The mount is usable with the XB2’20, XB2’19, XB2’18, XB2’17, XB2’16, XT2’19, XT2’18, and XT2’17 kits.

View another image here