Red RC » P On Road

January 27, 2020

Jesse Davis doubles at Victorian IC On-Road State Titles

The 2020 RCRA Victorian IC On-Road State Titles were held this past weekend at the MRCCR club in Lilydale, Victoria, Australia. The race saw the running of both 1/8th and 1/10th nitro on-road classes and in 1/8th IC Track it was Infinity’s Jesse Davis with the overall TQ from Serpent’s Jeff Hamon. Jesse was able to conserve his qualifying performance in the 30-minute A-main event, leaving behind Jeff in 2nd some four laps down as Nicholas Salib (Infinity) came in 3rd to round out the podium. In 1/10th 200mm Touring Jeff Hamon would lead the way in qualifying, however the 30-minute A-main event had Jesse taking another win after Jeff ran into trouble, which meant he would have to settle for 6th place overall. Behind Jesse though it was the Infinity duo of Andrew Shapland in 2nd and Brayden Stanley in 3rd.

Image: Jesse Davis

January 27, 2020

Yokomo BD9 2.0mm flex upper deck

Coming from Yokomo and made for the BD9 touring car is a 2.0mm carbon fibre flex upper deck. Using the same graphite material as the standard top deck, the flex variant is of a different shape with a redesigned, increased torsional flex front section which results in a milder steering response which comes in handy to calm down steering in high-bite track conditions while increasing rear traction for lower grip tracks. The top deck is machined from high-quality carbon fibre and a direct fit, however Yokomo recommends to use alloy upper deck screws to maximise the top deck’s effects.

View another image here

January 27, 2020

Xray Racing Series Slovenia Rd3 – Report

The penultimate round of the Xray Racing Series Slovenia was held recently and attracted drivers from four different countries including Austria, Croatia, Italy and Slovenia. In the Formula 21.5 category it was Matej Dobnikar who easily took the overall TQ while in Touring 13.5 it was again Nejc Mihelic with the pole position as in the two previous rounds. In the Touring A-main it was the pole sitter Nejc Mihelic who converted the pole into a straight win with Bjan Miklozic and Nejc Marcic completing the all-Xray top 3.

Continue reading the report here

January 26, 2020

SpeeDome-RC BD10 hybrid screw kit

Coming from SpeeDome-RC is a hybrid screw kit for the Yokomo BD10 mid-motor touring car. The set consists of heavy brass screws for the lower centre portion of the car such as front and rear bulkheads, the motor mount and battery locators as well as titanium screws for the steering posts, outer suspension mounts and higher placed areas such as bumper parts, servo mount, centre flex braces and more. Also included are black colour 7075 aluminium fasteners for the upper deck, shock towers and front and rear bulkhead covers. The set is complete with four black colour wheel nuts and it makes for a lower overall centre of gravity due to using heavy lower and lighter upper fasteners while ensuring good overall stability and durability.

Source: SpeeDome-RC [facebook.com]

January 26, 2020

RC Maker CentraFlex BD10 top deck & post set

RC Maker have introduced their new CentraFlex top deck and post set for the Yokomo BD10 mid motor touring car. Conventionally in mid motor setups as seen on the BD10, the front of the top deck is entirely split in order to be able to slide the top deck over the front belt. This provides a significant amount of flex to the front of the car only, creating quite an imbalance in the top deck’s flex characteristics. The CentraFlex has been developed to slide in from the side under the belts, and due to the single sided design, can be joined in front of the spur gear to prevent excessive front top deck and bulkhead flex, bringing back the balance of front to rear flex provided by the top deck. As well as this, RC Maker have also added an additional post in front of the spur, to add more options when tuning the chassis’ flex. By installing or removing the flanged bearings either side of the spur gear, owners can change the flex point of the car instantly, either moving it forwards or backwards to adjust the balance of the car.

Continue reading here

January 26, 2020

Xray Racing Series Rd6 – Report

Round 6 of the Xray Racing Series Germany was hosted by the MSC Herrenhaide club with many entries making for a good atmosphere and competitive racing. The strongest class was Touring FWD which offered entertaining races with other classes being Touring Stock, Touring 17.5T, Formula and 1/12th scale. In Touring Stock, Tim Schulte took A2 and A3 from pole position after Sven Müller had taken A1. While Tim took the overall win it was Sven on the runner-up spot. Jonny Guerra rounded out the top 3 result.

Continue reading the report here

January 25, 2020

TSP-Racing Zonda GT 1/8th GT body shell

2-Speed from Germany have introduced the new TSP-Racing Zonda GT 1/8th GT body shell usable for both standard and long wheelbase chassis. The advanced competition body shell offers scale looks with performance to match due to refined aerodynamics that ensure a balanced front and rear downforce. The body will fit most 1/8th GT and rally game chassis in standard and LWB configuration due to the special design of the rear fenders, it is currently awaiting EFRA approval and will become available by mid to end of February.

View more images here

January 24, 2020

Team Associated DR10 RTR drag race car

Team Associated have introduced their all-new DR10 RTR drag race car. The DR10 drag race car is based on the 9-time ROAR Short Course National Championship winning truck and utilises a moulded low-centre-of-gravity chassis, metric hardware, 18 precision ball beatings, a 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch as well as an adjustable suspension. Other features include a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as AE’s all-new DVC Dynamic Vehicle Control receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. The DR10 is available as ready-to-run package and also in LiPo combo specification including a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug.

View lists of the specifications and features and more images here