Red RC » P On Road

August 26, 2019

Milan Holthuis wins Rd5 of Dutch 1/10th nats

The tight and twisty track at Gouda played host to round 5 of the Dutch 1/10 IC national series. The weather was glorious with the high temperatures stressing the engines to the max. Saturday saw a busy track with everyone searching for a stable setup for the low grip, but the track also demands a lot of steering in the many hairpins. Not an easy balance. Sunday started with the qualifiers and it would be Milan Holthuis that edged out Julius Kolff for Pole. With tire wear on the high side, the final was tight on tires. Some elected for a tire change where others tried to get through the half hour with one set. After the B final provided the two bump ups, one of which was one of the youngsters Merijn Schipper that drove a consistent race to earn his place in the A main. The A final saw Milan streak away from pole. The challenge from Julius never came as he broke a driveshaft in the 2nd minute. That left the fight for second to be the highlight of the race. It was Jurmin Etnel that would claim the second step on the rostrum as Dave de Ruyter put his car over the curb onto the grass in the last lap to lose his second spot. The last round will be in September on the superb AMCA track at Apeldoorn.

Thanks to Julius Kolff for the report.

August 26, 2019

Jacob Cruz to run Dash Electronics

Dash have announced that Jacob Cruz has their team to run their electronics from 2019 and beyond. Runner-up at the 2019 Reedy race Open class this year, the highly rated young American will be using the full line of products from Dash and batteries supplied by Arrowmax. He had the following to say:

I want to thank Dash and Mr Lau for this great opportunity. After testing out the products, Im very happy with the quality and performance of Dash electronics. Im super excited to be working with and representing a great company. See you at the track.

Source: Dash [dash-rc.com]

August 25, 2019

Serpent 750 optional rear diff housing

Serpent have introduced a new optional rear differential housing made for the European Championship winning Natrix 750 platform. The housing and pulley has been cast from ‘Arrowspace Magnesium’. Claiming to have constructed the perfect metallurgy recipe to ensure the best solution for weight to strength ratio, the use of ‘Arrowspace Magnesium’ creates a much stiffer housing resulting in a much more consistent diff along with less twisting or torque loss through the drive train. This housing actually weighs less than the standard plastic part and is compatible with the standard internal diff parts.

View more images here

August 25, 2019

Bezerk RC Pro 10 Winter Series Rd2 – Report

The second round of the Bezerk RC Pro 10 Winter Series was held at England Park Raceway, Brisbane, Australia this weekend. The full long track layout was used for the event and a good field of Pro 10’s turned up to compete. After three rounds of qualifying Shannon Overson’s Bezerk Litesabre secured TQ with Clayton Hughes (Litesabre) second and Scott Tapsall’s (Xray X10W) filling out the top three. Clayton Hughes set the fastest lap time of the night in round three of qualifying with a 14.606 second lap. Heading into the third final it was one win each between Clayton and Shannon. Unfortunately in the decider Clayton’s Bezerk Litesabre had a mechanical failure while leading which handed the race and round win over to Shannon. Clayton secured second place for the round with Terry Norman finishing an impressive third place with his new 73RC chassis. All in all it was a fantastic night of super fast competitive racing with some very sportsmanship behaviour shown in the finals. The third and final round will be held on the 21st of September.

Thanks to Shannon Overson for the report.

August 23, 2019

Blitz GT4 1/8th GT bodyshell

Blitz have released their all new GT4 1/8th GT bodyshell. The new GT4 body has been made in cooperation with JJ design, with the core design based off a real GT sports car and with a lot of effort put in the aerodynamics. The body specification follows the IFMAR GT GBS rules with the design focussed on more steering and more overall stability. The standard body is made from 1.0mm high-quality clear polycarbonate sheet, with a 0.8mm version also available, and is supplied with rear wing set, window mask and decals.

View more images of the GT4 here

August 23, 2019

Sweep Racing/Mibosport SQS-32PGL tires on BBS rims

Coming from Sweep Racing in cooperation with Mibosport, one of the biggest racing shop in Europe, is the brand new SQS-32PGL competition tire on BBS style rims. Specially designed for the realistic touring car classes, in particular the growing front wheel drive 1/10th touring car class., they are a belted low profile slick offering good traction, making them easy to drive without traction roll. They come pre-glued on black BBS style rims offering a cool and realistic look and each set of tyres includes 5 sets of coloured rim stickers for matching with your body colour. These tyres will be used on the upcoming new season of Mibosport Cup in their new FWD and GT Stock categories.

Source: Mibosport [mibosport.com]

August 22, 2019

2019 Calgary Summer Slam – Report

Last weekend the Calgary Alberta Radio Control Auto Racers (CARCAR) hosted their indoor onroad ‘Summer Slam’ trophy race in Calgary Alberta, Canada. The participants came from all across western Canada to battle for a chance to have a place on the podium. In 1/12 scale modified the cars were absolutely flying and we had Tommy Tam (YRX-12) pull the quickest lap times to TQ and win. 2nd place went to Rob Mcquarrie (P12 Evo) taking 2nd and Ryan Babcock (12R6) sitting 3rd.

Continue reading the report here

August 21, 2019

MST RMX 2.0 MB rear suspension upgrade sets

Coming from MST and made for their RMX 2.0 range of drift cars is the MV aluminium rear suspension upgrade sets. Available are width adjustable rear lower arms as well as a rear upright set with the arms allowing for a 6mm adjustment range; up to 3mm narrower and 3mm wider than the standard plastic arm while the upright set enable the owner to adjust rear wheel steering if needed. All parts are machined from high-quality aluminium, the sets include mounting hardware and they are available in black or red anodising.

View the rear upright set here