Red RC » P On Road

December 10, 2018

Yannic Prümper wins at EWS International

The 2018 EWS International, held this past weekend in Thundersley near London, concluded with a victory for Infinity’s Yannic Prümper. After sitting atop the standings after Saturday’s qualifying rounds, the German driver secured pole position in a very tense final qualifier on Sunday morning. With Elliott Harper looking like his strongest challenger for the overall TQ, it was the British driver who led the final round initially with his Xray. However, in the final minute of the run, a small mistake from Elliott allowed Yannic to close within a tenth of a second, before Pole Position was decided on the very final lap as Elliott ran a little too much kerb coming onto the back straight for the final time, giving Yannic the win and the overall TQ by just two hundredths of a second. The close racing out front allowed Yokomo’s Ronald Völker to also move into the mix, taking third in the round just one and a half tenths behind the leading pair, which in urn secured him fourth on the grid behind Marc Rheinard.

Continue reading the report here

December 10, 2018

Ruddog 7.6V Graphene Plus LiHV battery packs

Ruddog Distribution from Germany have introduced their new Graphene Plus LiHV battery range. The high-performance packs are built using high-power 100C Graphene Plus technology cells for more power over the whole run and less fading towards the end, resulting in constant lap times. The batteries are available as 6000mAh or 8000mAh standard-size as well as 5500mAh shorty battery pack, and they make use of new semi-transparent hardcases with split stickers, ensuring the batteries look good for longer. Other features include 5mm bullet-type connectors for best possible power supply and they come in handy, reusable plastic boxes for convenient transportation and storage.

View the other battery packs here

December 10, 2018

Schumacher Winter Series Rd3 – Report

For the third round of the Schumacher Winter Series presented by the Louth Radio Control Car Club, 70 drivers turned up for some hot track action while the temperatures were cold outside. In 13.5 Ricky Lee would debut at the club and set about the top qualifying position with his Awesomatix. Nathan Winyard and Chris Lovely would mix at the top with their Xrays but miss out on TQ rounds. Andrew Green would show an improvement to form with 4th. Joseph Cocking showed promise with the new Yokomo, ahead of Garry Plant with another Awesomatix.

Continue reading the report here

December 10, 2018

HB Racing D817 & RGT8 anti-roll bar sets

HB Racing have introduced two new anti-roll bar sets for the D817V2 Buggy, D817T Truggy, RGT8 and RGT8-E cars. They give racers a finer range of stiffness to help tune the car to track conditions. The front sway-bar set has 2.3mm and 2.5mm bars, while the rear sway-bar set includes 2.5mm and 2.7mm bars, each labeled with a tag that shows the stiffness.

View the rear swaybar set here

December 10, 2018

T-Works T4’19 & BD9 5g balance weight

Coming from T-Works and made for the Xray T4’19 and Yokomo BD9 touring car is a self-adhesive 5g balance weight. The plate is a direct fit for the mirrored motor pocket that is machined into the chassis battery area and it allows for better weight balance when running the new generation of lightweight low-profile battery packs. The plate comes with a black surface coating, gold-colour writings and it is clad with self-adhesive tape for easy mounting.

Source: T-Works [rc-tworks.com]

December 10, 2018

Daniel Carlsson wins at MSEC Rd3

Round three of the MSEC cup was held in Åtvidaberg in the middle of Sweden, this past weekend. In the Touring 13.5T class it was Buggy ace Elias Johansson who set the pace in the qualifiers. Only 0.7s off was team mate Daniel Carlsson and lining up 3rd on the grid was Marcus von Elling. In the finals Elias Johansson had some hard times when grip came up that added to some electronic problems. Daniel Carlsson took full advantage of this and brought home the win in A1 and A2. Before A3 the remainder of the podium was still quite open and Elias Johansson took the win in front of Markus von Elling, so the overall result was Daniel Carlsson (Team Associated) taking the win in front of Marcus von Elling (Xray) and rounding out podium was Elias Johansson (Team Associated).

Thanks to Daniel Carlsson for the update.

December 8, 2018

Prümper tops EWS International after Saturday

Saturday’s action at the 2018 EWS International concluded with Infinity’s Yannic Prümper atop the ranking lists in the Modified class. The German had started off the day with a second place in the opening qualifier, and backed that up with a TQ run in the evening’s Q3 round. Describing how the whole Infinity team had improved throughout the weekend, the multi-time podium-finisher at the event said that it had “started pretty bad, but we worked together and found pace again”. He won’t make any changes to his IF14 for tomorrow, but will use the free practice round scheduled in the morning to run in his second set of race tyres.

Continue reading the report here

December 7, 2018

Bittydesign JP8HR 190mm touring car body shell

Bittydesign from Italy have introduced their new JP8HR 190mm touring car body shell. Building on the success of the popular JP8 body, the JP8HR offers the same ultra high downforce design but with improved mid-corner rotation for even faster cornering, all without compromising rear end stability. The body will excel on asphalt and carpet surfaces and it especially comes in handy on ETS and CRC-clad tracks. The lid is moulded from high-quality 0.75mm Lexan polycarbonate, it meets the 90g ETS rule and comes including stickers, window masks and wing mounting hardware.

View more images here