Red RC » P On Road

October 25, 2018

Balestri is Top Qualifier in Miami

Dario Balestri is the Top Qualifier at the 1:10 200mm World Championship in Miami. The Infinity driver pulled off his third consecutive Worlds pole position in as many years with another TQ run in the penultimate round of qualifying. Having made a mistake in the day’s opening qualifier, the reigning 1:8 World Champion put in a perfect Q5 making 24-laps to top the times for a third time and deny team-mate Naoto Matsukura and Andy Moore the chance of a first nitro World’s TQ. Having taken the third round of qualifying, Moore had issues in the pits in his fifth run while a mistake from Matsukura while setting the TQ in front of Balestri ended his hopes and he ended up 5th for the round. It would be Dominic Greiner who was closest to Balestri but missing out on going 24-laps. Simon Kurzbuch would complete the Top 3, matching his surprise P3 in Q1, only this time the Shepherd driver took a more traditional route and made a fuel stop like everyone else during the 7-minute qualifier. Robert Pietsch made it four different manufacturers at the top for the round also equalling his best performance so far, while Mugen team-mate Shoki Takahata completed the Top 6.

Continue reading this report here or view our complete event coverage here.

October 25, 2018

Matusukra opens Day 2 of qualifying with first TQ run

Naoto Matsukura has opened the second day of qualifying at the 1:10 20mm World Championships in Miami with a TQ run. Having opened qualifying with a P2 but having had issues in Q2 and 3 yesterday, the Infinity driver bounced back in the 4th round to top the times from team-mate Andy Moore. Continuing Infinity’s reign at the top of qualifying, Matsukura’s TQ is the first 24-lap run of the Homestead RC Raceway with his advantage over Moore over 2-second. Unfortunately having TQ’d the opening two rounds of qualifying and ending the day with a P2, Dario Balestri could not continue his form as he got his car hooked up in a corner board which cost him over 6-seconds. Third fastest would be Dominic Greiner, the reigning champion posting a new fastest pitstop of the weekend of 4.2-seconds as pitman Klaus Lechner bettered the previous record set in the heat before by Moore’s pitman Trin NungGai. The big improver of the Q4 would be Teemu Leino, the European Champion who had a best of a P10 from yesterday setting the fourth fastest time ahead of Tadahiko Sahashi and Francesco Tironi.

Continue reading this report here or view our complete event coverage here.

October 25, 2018

T-Works lightweight bearing kits

Coming from T-Works are four new lightweight bearing kits for vehicles such as the Xray GTX, Kyosho Inferno GT3, HB Racing RGT8 and Mugen MBX8 Eco. All use 8x14mm rubber-sealed bearings to replace the standard kit bearings for lighter ones. Using the lightweight bearings kits will reduce the unsprung masses for a more nimble handling and a lower overall weight. Also included in the sets are lightweight reducer bushings.

Source: T-Works [rc-tworks.com]

October 25, 2018

Dimitris Ioannidis wins Greek EP Touring finale

The final round of the Greek Electric On-road Nationals was held at the Fanatix Racing Track in Athens. The fifth and final round would decide the championship meaning a strong turnout of racers attended the event. Start of the day was up and coming Dimitris Ioannidis who took the overall TQ after the qualifiers. In A-main leg 1, the battle for the first place was between Ioannidis and Isaakidis but the former would dictate the pace of the race thus finishing 1st followed by Isaakidis and fast Doukakis bringing home 3rd place.

Continue reading the report here

October 25, 2018

Moore TQs third round at World Championships

Having impressed with a P2 in the second round of qualifying at the 200mm World Championships, Andy Moore went one better in Day 1 of qualifying’s final round to TQ Q3 ahead of reigning champion Dominic Greiner by 15/100ths of a second. Running the second fastest heat, the Infinity driver took advantage of the cooler track conditions to set the fastest time of the day bettering Dario Balestri’s best time from the opening two qualifiers by 3-seconds and just missing out on completing 28-laps of the Homestead RC Raceway. Third for the round would go to Balestri, the Italian having an impressive day to hold the overnight provisional TQ with two fastest runs and a P3. After problems in the opening two qualifiers, Robert Pietsch ended the day with P4 ahead of Tadahiko Sahashi with Francesco Tironi completing the Top 6.

Continue reading this report here or view our complete event coverage here.

October 24, 2018

Another TQ run from Balestri in Florida

Dario Balestri has produced another TQ run at the 1:10 200mm World Championship in Florida. Having admitted himself to being surprised at taking the opening round of qualifying this morning, the Infinity driver once again topped the second of the 7-minute qualifiers by 2/10ths, this time round ahead of team-mate Andy Moore. Having been disqualified from Q1 after setting the fourth fastest time, Shoki Takahata would keep his time this time round to complete the Top 3. P2 in the first round, an early mistake put Naoto Matsukura out of contention while Top Seed Lamberto Collari continued to have engine issues only this time they meant he did not even take the start. For reigning champion Dominic Greiner it was to be another 4th for the round with improvements from Toni Gruber and Jilles Groskamp seeing them complete the Top 6.

Continue reading this report here or view our complete event coverage here.

October 24, 2018

Blaze Racing CRC 1/12th scale Quad-link conversion

Coming from Blaze Racing is the Quad-link conversion for CRC 1/12th scale pan cars. Taking the read pod design of the larger Pro10 cars, the plug and play conversion uses two addition, smaller, links to replace the typical pivot ball. The construction is bind-free and allows to fine-tune the rear suspension geometry – something less common in 1/12th scale racing. In addition it optimises the rear roll centre for increased rear traction without sacrificing front end grip. The conversion consists of 7075 aluminium components and 3mm carbon parts, steel ball studs and composite links and it is usable on cars such as the CRC CK25.

View more images here

October 24, 2018

Balestri takes opening qualifier at 200mm Worlds

Dario Balestri has TQ’d the opening round of qualifying at the 1:10 200mm World Championships in Miami, Florida. Only 10th in seeding, just making it into the top heat, the reigning 1:8 World Champion topped the first of the six qualifier by 4/10ths of a second from Infinity team-mate Naoto Matsukura. With the 8th running of the nitro touring car Worlds now featuring 7-minute qualifier, an impressive run from Simon Kurzbuch saw him take P3 after he ran the full distance without stopping for fuel. For Dominic Greiner he opened his title defence with a P5 run which later became P4 when Shoki Takahata was disqualified. The Japanese driver fell foul of the body ruling that no two openings can be closer than 5mm and in his case he had only a 4mm gap between the rear window and roof hole for the glowplug. Jesse Davis would set the fifth fastest time with Tadahiko Sahashi completing the Top 6. Having topped seeding on his 200mm Worlds debut, Lamberto Collari could only manage the 12th fastest time in Q1 reporting afterwards that he had a glowplug issue that meant he couldn’t get a good tune on his engine.

Continue reading this report here or view our complete event coverage here.