Red RC » P On Road

November 3, 2017

T-Works MTC1 & IF14 20mm tweak block

Coming from T-Works is a 20mm wide tweak block for the use with Mugen MTC1 and Infinity IF14 touring cars. The block was designed to fit right between the front and rear bulkheads in order to create a straight and tweak-free assembly upon building or maintenance. Precisely aligned bulkheads will ensure best possible drivetrain efficiency and also reliable left to right chassis flex characteristics. The block is machined from high-quality material and it comes black anodised and with machined edge details.

View another image here

November 2, 2017

Rebels Race Rd2 – Report

Round 2 of the Rebels Race was held in Trebešín, Prague last weekend. The very technical track was laid out on ETS carpet and one or the other driver had his problems to tackle the challenging circuit. In Touring Modified 31 entries made for competitive racing and after the four qualifiers it was Michal Blahovský who came out on top in front of Petr Grof and Matěj Šulc. After the finals things had mixed up a bit as Matěj Šulc, with a 1st and 2nd place finish took the win from Michal with a 1st and 3rd place while Petr had to settle for 3rd in the tie-breaker.

Continue reading the report here

November 2, 2017

Marc Valero wins Catalan Pro10 Championship

The final round of the 2017 Catalan Pro10 Championship was held last weekend and it was Isaac Amorós who won at the season finale. However it was Marc Valero who ended the 8-race series on top, snatching the back-to-back championship while Jaime Lacuesta, who missed the final round, completed the championship in 3rd overall. With an ever rising number of entries at the races, the top positions were fiercely fought for with drivers such as Sergio Lacuesta or Raul Carmona also battling for the top spots and the family team of Jaume and Jordi Creus becoming a steady force in the championship.

Source: Pro10.cat [pro10.cat]

November 2, 2017

ROAR announce 2018 calendar dates & tracks

ROAR have announced the dates and tracks for their National Championships for 2018. Apex Raceway and Hobbies of Murfreesboro, Tennessee will play host to the Carpet Nationals from the 8th to 11th of March. The Electric Paved On-road Nationals will be held from April 26th to 29th at Ft. Myers RC Car Club in North Ft. Myers, Florida. The 1/8th Fuel Off-Road Nationals will be run from the 14th to the 17th of June at the Southside RC Raceway in Lake City, Florida, while the 1/8th Electric Off-Road and 4WD SCT Nationals will be held at HobbyTown Hobbyplex in Omaha, Nebraska from July 19th through to the 22nd. Hobby Action RC Raceay in Chandler, Arizona will play host to the 1/10th Electric Off-road Nationals from August 16th to 19th while the Nitro On-road Nationals will be held at Nuggets Ranch Raceway in Pompano Beach, Florida from September 20th to 23rd.

Source: ROAR [roarracing.com]

November 2, 2017

Serpent Cobra GT 3.1 Team Edition 1/8th nitro GT kit

Coming soon from Serpent is the Cobra GT 3.1 Team Edition 1/8th nitro GT kit. The popular Cobra GT has received some subtle refinements and improvements such as longer lower shock extensions that will fine-tune the car’s handling characteristics. Also new in the suspension compartment are updated carbon fibre shock towers and hard-coated aluminium shock mounts. Also part of the upgrade are silver front and black rear springs as well as 2.3mm and rear 2.7mm anti-roll bars to make for a refined kit setup. The 3.1 variant is rounded out by the SRX8-inspired brake setup with steel brake discs, pre-glued brake pads and aluminium centre brackets that will ensure a smoother operating brake with less fading and overall easier maintenance.

View the features and more images here

November 2, 2017

AME BD8-series Aluminium Backbone

Following AME’s carbon fibre backbone for the Yokomo BD8-series touring cars comes an aluminium variant. The part has been developed and tested in cooperation with the Yokomo Factory Team in Stock and Modified classes and it will change the handling of the chassis by reinforcing the rear chassis section. The results are improved stability, drivability and corner speed in nearly all track conditions, from low to high grip carpet or asphalt, with the alloy part offering even more rigidity compared to the carbon fibre brace. The backbone is machined from high-quality aluminium and it is usable with the BD8 2017, 2018 and SV.

Source: Ruddog [ruddog.eu]

November 2, 2017

3DRC touring car wing button set

3DRC from Germany have introduced their new 3-D-printed touring car wing button set. Included are aerodynamically-shaped wing buttons, 3 degree wedges and large surface 5.5mm nuts. The whole set weighs in at only 1.5g and it us thus perfect for the use with lightweight body shell. Using the optional angled shims will give the wing a larger attack angle and more downforce, resulting in increased rear end grip especially on low grip tracks. The set is usable with most of today’s competition touring car body shells and needed for completion are two M3x8mm flathead screws.

View more images here

November 2, 2017

KO Propo RSx3 One10 Flection servo – Coming soon

KO Propo have released a first teaser image of their forthcoming RSx3 One10 Flection low-profile servo. No details on the specifications and features are available yet but looking at the image it appears the servo will feature a black and golden anodised aluminium upper case, an aluminium middle heatsink section and a black connection wire. We bring you more informations on the subject as soon as they surface.

Source: KO Propo [kopropo.co.jp]