Red RC » News

June 11, 2014

Reedy 5200mAh 50C square LiPo battery pack

After introducing the first “square” LiPo battery pack with the 5700mAh 65C version, Reedy now also offers a 5200mAh 50C variant. Built from lighter and slightly lower power 50C cells the pack is ideally suited for all applications that call for easier car control. Additionally, the reduced weight of of 261g makes it easier to attain the minimum legal weight while aiding in balancing front/rear weight distribution. The pack is equipped with dual 4mm sockets and a 2mm balance port.

Source: Team Associated [teamassociated.com]

June 11, 2014

Bornhorst & Viesins take wins at AMS 5.0

During last weekend’s Alabama Manufacturers Shootout 5.0 in Cullman, Alabama, TLR’s Adam Drake took the TQ in the highly contested 1/8th E-Buggy class. On the start of A1 Drake fall back early on but Serpent driver Joe Bornhorst inherited the lead and tried to put some space between him and the pack. Team Durango’s Ryan Lutz slowly chipped away on his lead though and the two took it down to the last corner, with Bornhorst taking the win. A2 had TQ Adam Drake out in front with Bornhost and Lutz in tow for the first few laps. Drake bobbled, giving Bornhorst the lead with the two would later have coming together on the straight allowing Lutz to capitalize and to take the lead. Lutz then ran out front trying to get some distance on the field. Bornhorst chipped away on his lead and took the lead with about 2 minutes to go after Lutz tapped a pipe. Bornhorst fend off a late charge from Drake taking A2 and the overall win while Ryan Lutz came in 2nd overall. JQ completed the podium in 3rd.

Click here to continue reading

June 11, 2014

Kurt van Vlemen wins at Dutch Truggy Cup Rd3

The 3rd round of the Dutch Truggy Cup was held at the astro turf track in Appingedam in the Netherlands. Kurt van Vlemen took the TQ honours and raced to the victory in the 30 minute final. Nathan Lejuez finished 2nd, only 4 seconds down on Kurt, while Bjorn Nagels completed the podium in 3rd place.

Click here to view the final result

June 10, 2014

Reds Racing extends VX 540 brushless motor line

Italian engine manufacturer Reds Racing, known for their Mario Rossi tuned high-performance nitro engines, recently stepped into the electric brushless motor market with their VX 540 motors. Featuring a CNC-machined 6061-T6 heatsink can with large venting holes, balanced sintered rotors, high-purity copper windings, heavy-duty solder tabs, high RPM ball bearings and a red anodised timing shield the motors are now also available as touring car related 3.5T and 4.0T as well as a 5.5T 4WD buggy variant.

Source: Reds Racing [redsracing.it]

June 10, 2014

Alex Kosciuszek wins Pro Buggy at Rumble in Rome

The 2014 Rumble in Rome set a new attendance record for their annual event with 234 entries. Drivers from Canada and all over the Northeast made the trip. In the Pro Nitro Class, Alex Kosciuszek went on to a relatively easy victory in the 45 minute A-main after Arizona based driver Billy Fischer experienced a pit lane flame out during the first pit stop. Alex was able to almost completely lap the field in the long A-main showing he’s not just an electric driver but a driver fully capable at all times.

Source: JConcepts [jconcepts.net]

June 10, 2014

JConcepts XB4 front & rear 12mm clamping hex

JConcepts introduce front and rear 12mm clamping hex adapters for the Xray XB4 buggy. The hex adapters are precision machined from aluminium, come blue anodised and feature a clamping style design that combine durability and functionality. The front adaptors can be used with any Kyosho ZX5/ZX6 specification 12mm hex front wheel while the rears use industry standard 12mm hex B44/TLR/B5 specification rear wheels.

Click here to view the rear adapters

June 10, 2014

The Pit’Butler 1/8th scale car & equipment holder

The Pit'Butler 1/8th scale car & equipment holder

The Pit’Butler is a handy 1/8th car and equipment holder designed by Henrik Rathje from Denmark. The design is based around a sturdy handle that mounts to your existing starter box via four bolts. Part of the handle is also a height adjustable polycarbonate mount that takes a fuel bottle, fuel gun, glow igniter and an assortment of tools so you have everything at hand without having to deal with the mess pit bags can create. For storage and transportation purposes the Pit’Butler can be disassembled easily.

Click here to view more photos

June 10, 2014

Schumacher Mi5evo touring car kit

UK company Schumacher introduce the Mi5evo, an entirely new competition touring car developed from the BRCA National Championship winning and popular Mi5 platform. Offering some revolutionary design features, the Mi5evo enables the racer even more tunability for both carpet and asphalt tracks. The car offers an ultra low centre of gravity design combined with a wider span vertical top deck that makes for both a responsive and nimble feel, yet is forgiving and consistent to drive. Other changes include an optimised motor position that sits 4.5mm closer to centreline, shorter shocks, a new steering system with tuneable Ackermann options, new mouldings and pins for lower unsprung weight as well as revised body posts and clamps.

Click here to view the features and more photos