Red RC » P Off Road

August 17, 2012

Novarossi P8XLT .21 engine

To celebrate winning the French, British and European Championships, Racing Experience along with Novarossi are offering a new engine based on the world famous P5 XLT. This P8XLT is a long stroke 8 port engine based on the well known S21 crankcase. Main features include turbo combustion chamber with O Ring, a super strong R7 conrod, a 14.5mm shaft with upsized counterweight to increase low-end torque and the 8 port sleeve with 3 exhaust ports gives quicker acceleration. To top it off there is a 60mm lightened cooling head. This motor will come in at less than EUR200 and will be available in limited quantities across the Racing Experience territories including France, UK, Portugal and the French speaking part of Belgium.

Source: Racing Experience [racing-experience.eu]

August 16, 2012

Avid Triad slipper clutch

Avid have released their new Triad slipper clutch, a compact 3 plate clutch that provides smoother throttle response, more torque capacity and lighter weight than current 2 plate slipper clutches. This project has been in development for 7 months and we are very pleased with the final result. At this weeks ROAR Super Nationals, the Triad slipper clutch won 2 titles in 17.5 Racing Truck and 17.5 4wd Buggy at the hands of Nolan Anderson and Zack Genova as well as competed in the Modified A-Mains with Ty Tessman and Jesse Robbers.

View an image of the slipper clutch set here

August 16, 2012

Vega Elite B4.1 2nd Gen conversion

Following in the steps of the successful Vega Elite Conversions Team Xtreme have announced the release of the B4.1 2nd Gen. New features include a new thicker kick up section, reinforced with a high quality weld for dramatically improved strength. The front sidewalls have been thickened to 2.6mm to increase strength while the gearbox has been raised 2.0mm, following in the steps of the highly successful 201 Gen2 conversion. New Gen2 rear carbon tower give virtually unlimited tuning options and a multi-position cell layout allows for enhanced weight distribution changes. Finally there is a newly designed carbon battery strap and to top it off a Gen 2 body shell designed for increased stability and to produce more down force.

View another image of the conversion here

August 16, 2012

Pro-Line Tazer RR & Hole Shot FR 1/10th tire

Pro-Line have released the Tazer for 1/10th buggy a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads that will last throughout the long A-mains and perfectly sized lugs that will propel you to the top of the podium. Available for the rear they come in M3 and M4 compounds. Also new is the Hole Shot 1/10th 2wd front tire in M3 and M4 compounds. If you race your buggy outdoors, then you need the new Hole Shot. Unlike the typical ribbed front tire, these 2WD fronts are super smooth while still maintaining all the steering you need. Ribbed fronts are known for doing the catch-and-grab at the wrong time leading to inconsistent handling. This thread sets the new standard in steering for every outdoor track condition, from super loose to hard-packed.

View the new Hole Shot FR tire here

August 14, 2012

PSM Racing VX3 ventilated brake disc

The original PSM Racing VX3 brake disc gave you more brake performance than you’ve ever wanted. The latest ventilated design provides a more consistent and smooth brake feeling paired with super lightness and low wear. It also kills all your brake fading problems, because the VX3 always stays cool and ready for bite. Available for most cars on the market.

Source: PSM [psm-rc.com]

August 13, 2012

Exotek TLR22 1mm tranny spacer set

New from Exotek is this fiberglass 1mm transmission spacer set for the TLR 22, 22SCT and 22T. The set raises the transmission 1mm for better forward traction and is designed for easier install and removal compared to loose washers.

Source: Exotek [exotekracing.com]

August 11, 2012

Avid TLR 22 vented motor plate

Avid’s vented motor plate for the TLR 22 platform is the latest addition to the company’s growing range of aftermarket parts. The plate is CNC-machined from 6061-T6 aluminium, comes black anodised and features 45 degree angled venting slots to keep debris out and to let cooling air in. Being 100 percent milled the plate plate is both true and rigid and the perfect base for today’s high-power brushless motors.

Source: Avid [avidrc.com]

August 10, 2012

Team Durango DEX210 Race Ready RTR

Team Durango introduce the DEX210 Race Spec RTR 2WD 1/10th electric off-road buggy. The car is based on the full-blown competition kit and comes factory-assembled with a composite plastic chassis, the patent pending 3-/4-gear gearbox for mid and rear motor layout, threaded aluminium body oil-filled shock absorbers, fully adjustable suspension parts with inserts for caster and toe angle adjustment as well as competition tyres and wheels. Included with the Race Spec buggy comes a 2.4GHz radio set, Speed Passion 13.5T brushless motor and speed controller as well as a pre-painted body shell.

Click here to view more pictures