Red RC » P Off Road

July 14, 2012

Akula Racing AKX2 Thresher conversion kit

Akula Racing have announced the AKX2 Thresher chassis conversion kit for the Ansmann X2C and Teacm C TC02C kits. The kit replaces the three-piece moulded plastic chassis with a 3mm thick 6082 aluminium chassis. This is fitted with carbon fibre side plates to control the flex, this gives the option to tune the chassis flex by changing the height of these from the chassis, the higher they are the stiffer the chassis becomes. The main benefit from a one piece aluminium chassis over the moulded plastic on the X2C/TC02C is that it has much more consistent and controllable flex which improves steering response, gives more overall grip, greater consistency and even better rear traction.

View more chassis images here

July 13, 2012

Reds Racing R5T Team Edition engine

The new R5T Team Edition from Reds Racing represents the state of the art of 3.5cc off road racing engine. Based on the Reds R5T, the new engine is equipped with the best technology to further improve fuel consumption, performance and reliability. Each R5T component is refined to minimize mechanical friction. The new backplate is refined with a special anti-friction hard coating RDC that reduces conrod-backplate friction improving engine efficiency and performance. The engine comes with all Swiss Made ball bearings. The new steel-ceramic hybrid rear bearing ensure longer life and low friction at high temperatures. Each engine is controlled personally by Mario Rossi and comes with Quality Control Certificate.

View more engine images here

July 12, 2012

MCD Astro Grip & Astro Max astroturf tires

With these new tires, MCD have released the first 1:5 / 1:6 offroad tires specially designed for Astroturf. All astroturf isn’t the same so to always have the best traction they will be available in two different pattern, Astro Grip and Astro Max, and two different compounds, white and yellow. This way you always can reach a maximum on traction and it doesn’t matter if it is wet or dry, hot or cold. Also suitable for the most 1:5 / 1:6 2WD cars by using the original rims.

Source: Robitronic [robitronic.com]

July 11, 2012

Associated 16° caster blocks and spindles

Precision machined from 7075 aluminium, these 16° caster blocks and spindles have been tested and developed by Team Associated’s top pilots to provide a more forgiving steering feel and improved suspension characteristics. Used to secure wins at countless events, including the Silver State Nitro Challenge, Alabama Manufacturers Shootout and French Nationals, the Vertical Caster Blocks and Spindle assembly further optimizes the geometry for all RC8 vehicle platforms. Features include integrated steering stops, lowered roll center, allows lubrication of bearings while assembled and hat bushings and pins are now secured with set screws. They fit all early and later models of the RC8, RC8T, and SC8, nitro and electric.

Source: Associated [teamassociated.com]

July 11, 2012

S-Workz S350 BE1 conversion kit

S-Workz have been in touch to tell us that their S350 BE1 conversion kit is now available. The set allows you to convert your gas powered BK1 1/8th scale buggy into the brushless BE1 and comes complete with everything you need, minus electronics, such as new chassis, battery mounts, body shell etc.

Source: S-Workz [sworkz.com]

July 10, 2012

Kyosho Inferno & Plazma tuning options

Kyosho have released this gun metallic anodized radio tray connector plate made of high quality aluminium for the Inferno MP9 TKI3. This option part is not only adding some bling to the car, it is also a useful setup tool allowing you to adjust the flex of the car in this area to your likening. Also from the Japanese company for their Plazma Ra 1/12 scale pan car are these center shock springs. Available in the hardness of soft, medium and hard they are a must have to setup the car at the race track.

View the springs here

July 9, 2012

Associated RC8.2e RS RTR buggy

The RC8.2e has already been proven as a winner after TQ’ing and winning the 2011 Sidewinder Nitro Explosion in the capable hands of Ryan Cavalieri. With the RC8.2e RS RTR you can now have this high level of performance in a Race-Spec Ready-To-Run. It comes loaded with the performance features you’ve come to expect from the Race-Spec line like the powerful Reedy 2000kv brushless motor, waterproof XP SC1300-BL brushless electronic speed control and XP 2.4GHz radio system, just to name a few. The RC8.2e RS RTR is the perfect way to get into the 1:8 scale Buggy class, and also has the benefit of having many Factory Team parts available for you to take your 1:8 scale dreams as far as you want.

View more details here

July 9, 2012

S-Workz S-ePower Li-Ion receiver pack

S-Workz have released this S-ePower Li-Ion 7.4v receiver pack made in Japan by Sanyo. The Li-Ion is one of the best types of Lithium batteries and is super stable and can take a large amount of charging cycles. At just 68 grams it is a perfect way to reduce weight in your S350 BK1 or other 1/8th scale buggy.

Source: S-Workz [sworkz.com]