November 7, 2012

Durango moulded inserts and cross shaft set

Team Durango’s new moulded inserts and cross shaft set fits the differentials in all Team Durango 1/8th scale models. These parts replace the steel cross shafts and inserts in the differential, offering a huge reduction in weight over the steel parts. The moulded parts are 80% lighter than the steel parts they replace, giving a total weight saving of 22.2g per vehicle. They have been extensively tested by their Pro team who found an increase in acceleration and breaking performance due to the reduction in the rotating mass of their cars’ transmission. The testing has shown that there is no detrimental effect in durability when using these moulded parts. Supplied in a set of 3, which is enough to replace the cross shafts and differential inserts in the front, centre and rear differentials in one vehicle.

View another image here

November 7, 2012

VP Pro RS-502 Evo clutch shoes

VP Pro has announced Evo versions of their RS-502 clutch shoe and RS-502H heavier clutch shoe. Made with a new aluminium alloy, the clutch shoes are now more durable while the weight has been altered. A tiny washer coming with the clutch shoes is the most outstanding feature. After long-term tests and research, they found if they insert a tiny round washer between the clutch shoe and flywheel, friction is largely reduced and thus the engine spools quicker. One set of clutch shoes includes 3 clutch shoes, 3 washers and 3 sets of springs, 0.9mm gold, 1.0mm silver and 1.1mm black.

Source: VP Pro [vp-racing.com]

November 5, 2012

8-Racing MBX6eco & DEX408 carbon chassis’

8-Racing have released two new 1/8th scale carbon chassis’ for the Mugen MBX6eco and Durango DEX408. They are designed to lighten these 1/8 electric cars and give them better handling, especially on low and medium grip tracks and have more flex than the stock alloy chassis. The MBX6eco chassis weighs only 150 grams and the DEX408 chassis weighs 170 grams which in comparison to the standard chassis on the Durango, is 150 grams lighter.

View the DEX408 chassis here

November 2, 2012

Exotek Durango gear cover & hex adapters

Exotek have released this heavy duty CNC machined gear cover for the DEX210, DEST210 and DESC210. The cover allows larger pinion area for stock class racing, allowing up to 37 tooth 48 pitch pinions. Aids in cooling the motor by adding more surface area to the motor mount while a slotted bottom screw mounting allows for easier removal from mid motor configuration. Exotek have also produced a pair of precision 15mm alloy hex adapters for the DESC210 or DESC410. A special design uses a set screw to lock the pesky axle pins in place for worry free wheel changes.

View more images here

November 1, 2012

JConcepts Kyosho RB6 Finnisher body

JConcepts have released a Finnisher body for the new Kyosho RB6. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body. In addition to the newly designed body, JConcepts has included 2 of the latest 6.5″ wide Hi-Clearance rear wings.

View another image of the body her

November 1, 2012

Duratrax 17mm wheel nut driver

The Duratrax 17mm wheel nut driver is a valuable tool for every 1/8 racer’s toolbox. The hardened 17mm socket fits most 1/8 scale wheel nuts and its large ergonomic soft grip handle is easier to use than T-handle style wrenches. Available in early November.

Source: Duratrax [duratrax.com]

October 30, 2012

Diggity Designs RB6 options parts

Diggity Designs release a load of option parts for Kyosho’s new RB6 2WD buggy. Available are a 4mm carbon fibre front shock tower, 2.5mm battery strap and 2.5mm carbon fibre battery strap holder and receiver mount. Also available are carbon fibre battery brace kits for rear and mid motor configuration and also kits containing the battery strap and one battery brace or a full set including strap, ESC/RX mount and two battery braces.

Click here to view the other new parts

October 30, 2012

SWorkz Falcon body shell

S-Workz have announced that their new Falcon body shell is now available. It features a cab forward design that gives greater stability and faster cornering speeds than the original shell and its new design gives your S350 a new totally new feel and aggressive look.

Source: S-Workz [sworkz.com]

Mibosport
VP Racing
T-Works