Red RC » P On Road

June 14, 2019

RC Atomic BZ3 1/28th scale 4WD touring car kit

RC Atomic have announced the soon release of their new BZ3 1/28th scale 4WD touring car kit. The vehicle features new front arms and knuckles for increased straight line stability while allowing for zero to twelve degree of caster. The single crank steering arm incorporates a servo saver and new rear suspension hangers ensure a perfectly aligned geometry. The new rear UTS Upper T-arm System increases rear suspension rigidity, thus improving stability of the rear wheel traction. Other new features include an ultra low centre of gravity chassis design, new ball diffs, ball cups, bulkheads, shock towers and a low centre of gravity motor mount. With the new design the diffs sit about 1.5mm lower with the motor and servo also being lowered compared to the previous model. The rear suspension can be built as camber link system for low to medium grip carpet, as upper T-arm system for RCP or EVA tracks and also as ARS active rear-toe system for expert users. The kit will hit stores very soon.

Source: RC Atomic [rcatomic.com]

June 14, 2019

Vortex Racing Ultimate ultra light-weight screw kits

Coming from Vortex Racing are three Ultimate ultra light-weight screw kits for the ARC R11 2019, Destiny RX-10SR and Xray T4’19 touring cars. The kits contain of high-quality 7075-T6 aluminium screw for the upper parts of the chassis as well as titanium fasteners for the bottom area, ensuring an exceptional weight reduction and stability compared to the standard steel screws. Also included are double secured aluminium M4 wheel nuts as well as aluminium M3 lock nuts if required by the vehicle. Both the ARC and Destiny-related kits include black-anodised aluminium hardware while the Xray-specific set includes orange anodised alloy screws. All three screw sets come in reusable boxes that can be used for storing small parts, electronics or spares. Manuals with detailed information on the screw sets can be found of Vortex Racing’s social media page here.

View another image here

June 14, 2019

Destiny RX-10 new design suspension arms

Destiny have announced the release of new design suspension arms for RX-10 series of touring cars. Offering improved traction and reliability the full-face arms are available in two different length and using different lower shock mounting positions which allows to fine-tune the suspension geometry. Available are the original geometry Type A arms (front 53mm/32.5mm, rear 54mm/38.5mm) as well as the new geometry Type B (front 53mm/31.5mm, rear 54mm/39.5mm), and new length Type C (52mm/31.5mm, rear 55/39.5mm) and Type D (52mm/30.5mm, rear 55mm/40.5mm) arm sets.

Source: Destiny [destinyracing.jp]

June 13, 2019

Reds Racing 8000mAh & 6500mAh 4S LiPo packs

Reds Racing have announced the release of their all-new 14.8V 4S hardcase LiPo battery packs. Available as 8000mAh 100C and 6500mAh 75C variants, both are made of high-quality cells and they come in a protective hardcase pre-wired with industry-standard balancer ports and T-type connectors. The 4S packs are ideal for competition 1/8th scale on-road and off-road usage with 1/10th and 1/12th scale 2S and 1S packs following at a later date.

View the 6500mAh battery here

June 12, 2019

Vortex Racing Aeris 30mm fan duct

Coming from Vortex Racing is their new Aeris fan duct for common 30mm fan units. The duct has been optimised to keeping the motor as cool as possible for increased overall performance and less fading towards the end of a run. While cold air is forced through the fan and duct, a specially-shaped air vent helps hot air to escape which further increases cooling performance. Two recessed sections on the sides allow for easy fan insertion and removal. The duct is made of high-tech resin for exceptional durability and less changes or cracking.

View more images here

June 12, 2019

Infinity IF18 carbon front body mount plate

Infinity has released a new carbon front body mount plate for use with their long front body post to increase the rigidity around the front bulkhead of their IF18. Using this combination increases response in initial steering while still maintaining a mild steering feel in the middle part of the corner. The new mount plate also offers a weight saving of 4g over the standard kit body mounting.

View the installed part here

June 12, 2019

RC Maker V2 body anti-tuck wing mounting set

RC Maker have introduced their new V2 light body anti-tuck wing mounting sets for the most popular 190mm touring car bodies on the market. Our brand new Anti-Tuck Wing Mounting Set Lite V2 introduces an even more compact, efficient way of integrating wing mounting and anti tuck components. This system prevents body tucks behind the rear wheel arch during racing, as well as inconsistencies on high speed tracks and in windy conditions, causing the bodyshell to vibrate. Weighing in at only 5g for the pair, this lightweight strut only requires one additional M3 screw other than the wing mounting screw to secure the strut behind the wheel arch. Using the existing upper wing buttons, racers can screw directly into the strut securing it at the top whilst also securing the wing. The new design also offers extra material that sits in the vertical part of the wing strut. In crashes this section of the bodyshell can often crush or deform, and is unable to be repaired. The brace fixes this and prevents deformation in this area, ensuring your body lasts longer. The strut is produced by Australia’s highly regarded 3-D-printing experts Think RC. These are constructed of a rigorously tested, flexible, yet strong plastic material which allows them to be used time and time again between bodies. The struts are currently available for the Protoform Type-S, Zoo Racing DBX, Preopard and Hellcat as well as the Mon-Tech Racer 2.

View another image here

June 12, 2019

BMT 016GT short big bore shock absorbers

BMT have announced the release of their new short-type big bore shock absorbers for the 016GT 1/8th on-road car. Sporting a threaded aluminium shock body, black anodised upper and lower caps as well as black-coated low-friction shock shafts. The shocks come in sets of two and they are available now.

Source: BMT [bmt-team.com]