Red RC » Short Course

January 24, 2020

Castle Creations 2028 Extreme 800kV sensored BL motor

Castle Creations have introduced their new 2028 Extreme 800kV sensored brushless motor for large scale applications. The 4-pole 12-slot motor is of an updated design for improved efficiency and less heat build-up. Running modes include sensored and an ultra-efficient sensorless mode and high-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensure the integrity of the rotor is not compromised during harsh running conditions. In addition do oversized NMB bearings and a vibration dampening system ensure the longest bearing life possible. Castle’s proprietary winding techniques also allow to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor and dual sensor ports ensure optimal installation in pretty much every large-scale vehicle such as the Losi 5ive-T, 5ive-B or DBXL-E.

View a list of the specifications and more images here

January 22, 2020

Ruddog RP541 540 sensored brushless motor

Ruddog Distribution from Germany have announced the release of their all-new RP541 540-size sensored high-performance brushless motor. Designed and engineered in Germany the motor utilises a completely new design with a lightweight aluminium can ensuring a low weight of only around 153g while the new slotless stack design ensures increased performance and efficiency due to the lack of performance-killing milling for the long motor can mounting screws. This was made possible by using a new can design with a 1-piece front section and a short rear can that uses vertical mounting screws. Also new for the RP541 is a machined collector ring that comes silver-plated for the modified variants while the stock motor specific ring is gold-plated for an even lower internal resistance. Other differences between the stock and modified motors include performance enhancing ceramic ball races for the stock motor while the modified motor is equipped with high-qualify steel ball bearings. Part of the package are also optimised magnets that are able to withstand higher temperatures for longer, ensuring less power fading during a run while increasing overall durability. The magnets are also optimised for the RP541’s new slotless stack design. The motors are rounded out by new low-resistance solder tabs and a flat 150mm sensor wire and they are available as 4.5T to 9.5T modified, 6.5T 1S 1/12th scale modified as well as 10.5T to 21.5T stock variants.

View more images here

January 22, 2020

Pro-Line Jeep Gladiator Rubicon SC & MT Body

Pro-Line have introduced their new Jeep Gladiator multi-purpose body shell usable for short course and monster trucks alike. The Gladiator combines the iconic and unmistakable Jeep body styling with the utility and ruggedness of a truck that tells everyone that you are ready for adventure. Pro-Line has included all the scale Jeep Gladiator details into the body and sticker sheet that will completely transform the look of every truck. The 1-piece body comes clear, so owners can customise the look of their truck in any way they desire and it will fit the Traxxas Slash 2WD and 4×4 equipped with the LCG chassis and extended body mounts as well as the Arrma Senton 3S with out side guards as well as the Traxxas E-Revo 2.0 with extended body mounts. In addition the body of course fits Pro-Line’s own Pro-Fusion SC 4×4 kit.

View more images here

January 22, 2020

Performa P1 Controller 60A brushless ESC

Available now from Performa Racing is their new P1 60A brushless controller, an ideal first racing ESC. 2S to 3S LiPo-compatible and being a sensored controller, the speedo’s blinky mode allows competitive racing when running in spec motor classes. It can be used also with timing for club racing, “outlaw” or hobby use with down to 6.5T motors. The ESC is housed in a machined aluminium case for optimsed heat dissipation and it comes pre-wired with black receiver, power and motor wires for a professional look.

View lists of the features and specifications here

January 21, 2020

Performa P1 120A brushless controller

Performa Racing are busy adding more brushless speed controllers to their range of high-performance products with the latest being the P1 120A controller. Rated at 120A and usable with sensored or sensorless motors, the 2S to 4S LiPo-compatible controller is ideal for lightweight 1/8th scale buggies as well as 1/10th scale short course and monster trucks. The high-quality hardware allows for a small 48x35mm footprint and a low weight of only 121g. A switchable 6V/7.4V BEC system gives enough performance even for power-hungry high-voltage servos and advanced programming allows to fine-tune the ESC to a wide range of track conditions. The controller is housed in a machined aluminium case for improved heat dissipation and it comes pre-wired with black cables ensuring a professional factory look.

View lists of the features and specifications here

January 20, 2020

Ruddog 6000mAh & 4100mAh Graphene Plus LiHV packs

New from Ruddog Distribution’s own Ruddog brand are two LCG high-performance LiHV battery packs. First up is the 6000mAh 7.6V 100C Graphene Plus LCG Stick Pack LiHV, a standard size stick battery of 22.5mm height. The low centre of gravity battery allows to lower the car’s overall centre of gravity for improved cornering speeds especially in high-bite track conditions while the high-quality 100C Graphene Plus technology cells ensure a very low internal resistance and thus improved overall power, runtime and exceptional cell durability. The battery weighs in at 260g and it utilises 5mm bullet-type connectors.

Continue reading here

January 17, 2020

PR Racing introduce new S1 platform optionals

Coming from PR Racing and made for the S1 series of off-road vehicles are several updated or new parts. First up is the 2020 S1 front chassis top plate. The bulkhead was optimised and now incorporates a front swaybar mount that allows for easy attachment of the optional 2020 S1 front swaybar set. The front chassis top plate kit is also usable with the V3T and SC201 trucks and the optional anti-roll bar kit includes all needed hardware as well as 1.3mm and 1.4mm wires. While being at optional front swaybar kits, PR Racing also releases a truck compatible kit, again using 1.3mm and 1.4mm wires and including all needed mounting hardware. Last but not least come two new wishbone sets, a front gullwing lower arm set for the PRS1V3 Type R and a ST1 and SC201 compatible full arm set. Both include updated arms that feature anti-roll bar mounting positions.

View the other new parts here

January 16, 2020

TDK Gen 2 tyre traction compound

TDK have announced the release of their new Gen 2 tyre traction compound. The next generation of the brand’s safe, non-toxic, and biodegradable tyre sauce has a tweaked formula to work better with both on and off-road tyres. For off-road TDK Gen 2 has been designed to work with modern synthetic compounds and provides improved tyre and foam life for all compounds. For On-Road, TDK Gen 2 will work best on gray carpet or asphalt tracks. The traction compound is a nearly odourless, yet extremely effective sauce that provides a quick break-in and gives tremendous traction all while offering greater tyre life.

Source: TDK [tdkrepair.com]