Red RC » Short Course

May 15, 2019

ReVtech X-Factor 13.5T & 17.5T spec motors

Trinity’s ReVtech X-Factor spec motors are now also available in 13.5T and 17.5T variants. The lightweight motors weigh in at about 144g and they feature composite sensor boards, 0 to 60 degrees timing adjustment, a lightweight coming ring and locking endplate as well as a highly machined 2-piece CNC-machined alloy can and 2mm ultra low resistance solder tabs. The 13.5T variant is BRCA, EFRA and ROAR approved while the 17.5T motor is ROAR approved only. Both motors are built using the TEP1119 12.5×25.5 high torque rotor and they are available as standard race or team spec motors.

Source: Trinity [teamtrinity.com]

May 10, 2019

2019 SBS 1/10 EP Malaysian Major League Rd2 – Report

The second round of the SBS 1/10 EP Malaysian Major League was held at the SBS track in Sungai Buloh, Malaysia recently. Round 2 was run on a full astroturf surface for the first time and most racers found that the high traction surface was easy to drive on but not easy to be quick. Most spent days before the race trying out different tires and shock setups while at the same time learning to drive on such a high grip surface, which is a rarity in this part of the world. This round saw also drivers from the UK and also Indonesia who travelled for the sole purpose of racing. With the aim to make the race day more interesting, this year’s format is a two-round qualifying heat with four rounds of mains per class. In 2WD Modified, it was Team Associated’s Bashir who took TQ and after a close fight during the finals, took the win in the tie-breaker. 2nd place went to Shahrin (Xray) with the 3rd place being taken by Yuri Taruna from Indonesia.

Continue reading the report here

May 9, 2019

2019 JConcepts Stock Nationals – Report

The JConcepts Stock Nationals were held at OC RC Raceway in Huntington Beach, California last weekend. Expert 2WD Buggy was the perfect race for Team Associated’s Kyle Layton as he set the TQ and ran away with the win in the 10-minute A-final. With his polished, smooth driving style and starting from pole, Kyle was going to be hard to beat. From the very first lap, he was maximum push and lead the way from tone to tone to take a very impressive win. Yokomo’s Jake Thayer also drove brilliantly and displayed his stock speed and finished 5 seconds back from Kyle for 2nd. Team Associated’s AJ Marasco delivered a terrific run to land himself 3rd on the podium, which is quite the feat since he hasn’t made the main at the JConcepts Stock Nationals prior.

Continue reading the report here

May 8, 2019

Futaba HPS-CT700 low-profile servo – Coming soon

During this week’s Shizuoka Hobby Show in Japan, Futaba are presenting their forthcoming new HPS-CT700 low-profile servo. Housed in an aluminium case the high-voltage compatible servo pulls 24.8kg-cm of torque with a speed of 0.09s at 6.0V input which makes it powerful enough even for demanding nitro applications. An all-black wire makes for a stealthy factory appearance. Full information will become available in time for the release. Also coming is an aluminium steering wheel housing for the 7PX high-end radio system. Made to replace the standard composite part, the exclusive alloy item will improve case stiffness and thus steering precision and handling of the transmitter.

View the alloy steering wheel housing here

May 7, 2019

CS Electronic CSX V2 brushless motors

German company CS Electronic have introduced their new CSX V2 540-class modified and stock electric brushless motors. Based on the previous CSX the V2 variants offer improved performance, lower energy consumption, lower operation temperatures and a lower weight. At the same time the power curve and drivability have been improved. This was achieved by utilising a new internal design and Ti magnet material. The modified motor is available in 4.0T to 8.5T specification while the stock variant comes in 10.5T to 25.5T windings.

View more images here

April 25, 2019

Speedzone 7.4V 4000mAh oval diameter LiPo pack

Speedzone have introduced their new oval diameter 7.4V 4000mAh hardcase LiPo battery pack. Ideal for a range of applications including ready-to-run vehicles, certain Tamiya kits or starter boxes, the hardcase “racing pack”-style battery is made of high-quality 50C LiPo cells and it offers a high capacity for long operation times. The pack comes pre-wired with an industry-standard balancer power and a T-type power plug.

Source: Speedzone USA [speedzoneusa.com]

April 25, 2019

Team Associated Factory Team 12mm thin shock pistons

Coming from Team Associated and made for their 12mm 1/10th off-road shocks are new Factory Team thin shock pistons. These thinner shock pistons give less “pack” inside the 12mm shock. Ideal for tuning in all kinds of track conditions, they are particularly helpful on carpet to help improve jump landings. Hole size is machined into each piston for easy identification and they are available in 2×1.6 and 2×1.7 specification. The pistons fit kits such as the RC10B74, B6.1, B6.1D, T6.1, SC6.1, B64, and B64D.

View the 2×1.7 variants here

April 24, 2019

JConcepts T6.1 & SC6.1 Fin titanium turnbuckle kit

Coming from JConcepts is their new Fin titanium turnbuckle set for the Team Associated T6.1 stadium and SC6.1 short course truck. Designed specifically for style, durability and performance, the base of the shafts design is centered around a .143” titanium hex size which gradually tapers down into a 3mm thread base design which accepts the standard AE ball-cup configuration. The focus of the styling surrounds the lengthened adjustment hex area and the finned cuts that rotate about the center. The turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation.

View more images here