Red RC » Arrma

June 6, 2019

Arrma Infraction 6S BLX RTR Street Bash Truck

Arrma have introduced their mean looking Infraction 6S BLX Street Bash ready-to-run truck. The 1/7th scale vehicle is based on a 3mm anodised aluminium chassis with a red-colour centre brace for stiffness and cool looks. To aid high-speed stability a rear diffusor increases downforce and grip while a full-width front splitter balanced downforce distribution. A lightweight foam bumper adds protection and support to the front of the body. The suspension features a pivot ball design up front for increased adjustability while red anodised big bore alloy shock absorbers are keeping the belted slick tyres on the ground. The drivetrain utilises a 3-diff setup for traction in all track conditions and the electronics compartment houses the 6S LiPo-compatible BLX185 150A speed controller, the Spektrum SRS6000 Active Vehicle Control receiver and a powerful 15kg-cm torque steering servo. A sensorless 2050kV brushless motor propels the truck to top speeds of over 120km/h. The vehicle is decked out by a retro truck body shell with a factory-finished matte bronze camouflage trim and street truck decals. An included, unable wing lets the driver customise the downforce if conditions call for it.

View more images here

May 31, 2019

Pro-Line Brute E-Revo & Kraton body shells

Coming from Pro-Line and available for the Traxxas E-Revo 2.0 and Arrma Kraton 1/8th scale monster trucks is the pre-cut Brute body shell. The Brute is Pro-Line’s take on a modern truck and features a bold grill with eye-pleasing body lines sure to turn heads at the local bash spot. This bodies have been specifically designed to fit the unique shapes of the E-Revo 2.0 and the Kraton while allowing to add a custom paint job to the trucks. Window masks, detailed decal sheet and paint then peel over-spray film are all included. The pre-cut bodies help to get on the track sooner, as they only need to be painted and fitted with the annoying task of trimming being already carried out.

View more images here

May 10, 2019

RPM Typhon 4×4 3S BLX rear arms

Coming from RPM and made for the Arrma Typhon 4×4 3S BLX is a set of replacement rear A-arms. RPM’s versions are more adjustable, more durable and 5g lighter than stock. The designers added a second shock mount to the outside of the original stock shock mount, adding adjustability and improving trackability. The outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds. Moulded from engineering grade nylons, the arms are a lot more durable than the standard parts with the redesigned shape of the A-arms helping improve survivability during severe bashing. The rear arms come in sets of two and they are a direct fit.

Source: RPM [rpmrcproducts.com]

April 25, 2019

Arrma Outcast & Kraton 4×4 4S BLX RTR trucks

Horizon Hobby have introduced the new Arrma Outcast and Kraton 4×4 4S BLX ready-to-run trucks. Adding to Arrma’s already existing 3S and 6S BLX range, the new 4S LiPo compatible kits offer a more compact size than the 6S machinery, however they allow for speeds of up to 80km/h thanks to the BLX120 speed controller and 2400kV sensorless brushless motor. Building on the popular 3S trucks the 4S variant feature an increased track width and a new centre brace for added durability. Moulded 16mm big bore shock absorbers help keeping the 17mm hex 3.8” wheels on the ground in rough track conditions while the power system allows for all sorts of stunts on the tab. The wings and bumpers follow the look of the 6S BLX models, with new wings and body mounts. The ready-to-run package comes complete with a Spektrum STX2 2.4GHz radio with SRX200 waterproof receiver and an Arrma ADS-15M metal gear servo. Not included in the package are the needs power packs, charger and AA transmitter batteries. The 4S BLX range is available as Outcast vintage stunt or Kraton modern design monster truck.

View a list of the features and more images here

April 25, 2019

Pro-Line 2.8” pre-mounted monster truck tyres

Pro-Line have announced the soon release of their new line of 2.8” monster truck tyres mounted on the Raid black 6×30 removable hex wheel. Available are the Badlands, Sand Paw, Masher and Prime treads, ensuring a solution for nearly every surface and track condition. The removable 12mm hex section allows to access different tracks width and it is even change for a 17mm unit. The wheels fit vehicles such as the Traxxas Stampede and Rustler as well as a range of other monster trucks. New to the range are also 14mm alloy hex adapters for vehicles such as the Arrma Granite 3S 4×4 and the Senton 3S 4×4.

View the other new pre-mounts here here

April 18, 2019

RPM Typhon 4×4 3S BLX front arms

Coming from RPM and made for the Arrma Typhon 4×4 3S BLX is a set of replacement A-arms. RPM’s versions are more adjustable, more durable and 5g lighter than stock. The designers added a second shock mount to the outside of the original stock shock mount, adding adjustability and improving trackability. The outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds. Moulded from engineering grade nylons, the arms are a lot more durable than the standard parts with the redesigned shape of the A-arms help improve survivability during severe bashing. The arms come in sets of two and they are a direct fit.

Source: RPM [rpmrcproducts.com]

March 28, 2019

Arrma introduce 2019 1/8th 6S BLX vehicle line-up

Horizon Hobby have introduced the new 2019 line of Arrma 1/8th 6S BLX series of off-road vehicles. All now feature the capable BLX 185 system as standard, allowing for speeds of over 90km/h while sliding motor mounts, easy access centre diffs and a never-loose servo saver add to the existing features. Also new are never-pop steering ball links, never loose hub nuts as well as Spektrum STX2 transmitter and Spektrum IC5 connectors in each kit. The 2019 range includes the Typhon 6S BLX buggy, the Talion 6S sport performance truggy, the Kraton 6S BLX speed monster truck, the Outcast 6S BLX stunt truck as well as the Notorious 6S BLX classic stunt truck.

View the other 2019 vehicles here

March 1, 2019

RPM Arrma 4×4 3S BLX lower suspension arms

Coming from RPM and made for Arrma’s Granite, Senton and Big Rock 4×4 3S BLX trucks are new front and rear lower suspension arms. The wishbones allow for added adjustability thanks to a second shock mount positions, they are more durable than the stock parts due to being moulded from RPM’s renown nylon composite material and they are also lighter, ensuring improved performance. The arms are available as pair for the front or the rear of the trucks and they fit the Arrma Granite 4×4, Senton 4×4 and Big Rock 4×4, replacing the original AR330443 front and AR330516 rear arms.

View the rear arms here