Red RC » Capricorn RC

July 19, 2011

Capricorn LAB-C01 options & off-road setup system

Capricorn release two new option parts for the LAB-C01 on-road chassis and an off-road setup system for 1/8 scale off-road cars. The new two-piece brass engine mount for the C01 add weight to the lower part of the chassis, features machined cooling fins and is also usable on Shepherd’s V10 chassis. Also designed for the LAB-C01 are the new front drive shafts that are suggested for the use with a solid front axle. The off-road setup system is machined from aluminium and polycarbonate and helps to measure and adjust toe, camber and caster on the front and rear of nearly all 1/8 scale off-road buggies.

Click here to view the other products

July 17, 2011

Capricorn magic gum, teflon grease & white springs

Capricorn have released some new general purpose products for gas racers including their own magic gum cleaning putty which is made from Italian gum and will extract dirt and grime from even the tightest of spaces. Other new items include a general purpose teflon grease and soft white front and rear springs for the LAB C01.

View the other products here

July 15, 2011

CSO LAB-C801 2-speed shaft

CSO have released this new 2-speed shaft for the Capricorn LAB-C801 1/8th on road chassis. Made from hard coated steel, this 8mm shaft has been hollowed out to reduce weight and the 2-speed adapter is separate from the shaft making it simpler to replace.

Source: CSO [cso.com.hk]

July 12, 2011

Capricorn LAB-E01 SQ-R .12 engine

Italian company Capricorn have announced the release of their new .12 engine called the LAB-E01 SQ-R. Featuring a new crankcase with carburetor mounting hole that has a new 30° angle, the new carb features a new heat insulation material, while internally there is a new convex piston which has been machined from a block of high grade aluminium.

View images of the internals here

July 1, 2011

Capricorn 1/8 setup system & C-801 chassis plate

Capricorn got in touch to tell us about their new 1/8 scale setup system and ultra lightweight chassis for the LAB C-801. The setup is specially designed to allow the adjustment of the the rear camber and toe settings without the need to remove the body mount. Cut-outs in the aluminium camber and polycarbonate toe plates leave room for the body mount. This makes for fast and easy set-up changes. The updated ultra lightweight chassis for the LAB C-801 features a re-designed front area with additional material removed under the front bulkhead area resulting in more torsional flex creating an increased steering response with the positive effect of saving some weight.

Click here to view pictures of the chassis

June 22, 2011

Capricorn shock piston sets

Capricorn have released their new set of shock pistons. Suitable for Capricorn and Kyosho shock absorbers, the pistons come in 1, 2, 3, 4 & 6 hole versions to allow you to fine tune your damping for all conditions.

Source: Capricorn [capricornrc.com]

June 14, 2011

CSO LAB-C801 clutch bell pinions

CSO have released these new clutch bell pinion gears for the Capicorn LAB C801 car. Machined from high quality hard coated 7075 T6 aluminium, they are available in 19T, 20T, 23T, 24T & 25T.

Source: CSO [cso.com.hk]

June 13, 2011

Capricorn LAB options & clutch parts

Capricorn have released these Dario Balestri developed dual trackrods for the C-801. They connect the two front suspension brackets for better cornering speed and faster steering response. Also new are these new aluminium clutch bells for Xray RX8, Mugen MRX5, Serpent 966 and LAB C-801. Weighing in at around 3.6 grams, low end torque and top speed are dramatically increased. After much testing, the clutch shoe to use on those bells is their new black carbonium / molibdenum compound which ensures outstanding grip performances and a longer lifetime. Other new clutch parts include a lightweight hard coated aluminium flywheel nut, which helps reduce the weight of the moving parts. There is also new yellow extra hard front shock springs, a new tyre glue called 140% tires glue and a new aluminium setup system for 1/10th scale which comes supplied in a handy carry case.

View the other parts here