Red RC » Exotek

March 18, 2022

Exotek Racing Losi 22S drag car bumper set

Add protection to your Losi 22S drag car with this heavy duty alloy, carbon fibre and foam bumper set from Exotek Racing. This bumper set may just pay for itself in your first crash. Allows for optional mounting of SkyRC GNSS gps modules safely protected inside of the foam bumper and can be simply removed via 1 screw from the carbon hold in brace. Details include a heavy duty alloy and carbon fibre mounting base that secures the extra wide high density foam bumper. The same high impact foam used in touring car racing. Inside the foam bumper are 2 alloy posts for extra secure foam bumper mounting. The carbon plate has 3 hole positions for mounting the foam forward or back to fit in certain bodies. This design also allows you to experiment with adding nylon body posts onto the bumper or perhaps a lexan body lip (splitter) on the under side of the bumper. Designed to work with most street eliminator bodies.

View more images of the bumper set here

March 14, 2022

Exotek F1 front & rear lightweight wings

Exotek Racing have produced these extra light front and rear wings for 1/10 F1 cars such as the Exotek F1 Ultra, X1 and F104 etc. The front wing is moulded nylon with a higher mounting base reducing the chance of dragging on the track and unsettling the car. At 18grams, lighter weight helps with that as well as reducing weight that overhangs past the wheels that also unsettles the car. The rear wing comes in at 21grams and has extra large wing elements for maximum aero downforce. Molded with a black lower base and white wing element for higher visibility.

View more images of the wings here

March 3, 2022

Exotek DR10 HD pro style rear body mount

New from Exotek comes this heavy duty pro style rear body mount for the Associated DR10 Drag car. Constructed of stiffer 3mm carbon fibre plate that attaches to an alloy mounting base for reduced body bouncing and flex. A simplified design makes it much much easier to remove your transmission for servicing by eliminating the stock bracing and extra gear box screws. Requires Traxxas body mount posts.

View the complete set here

February 21, 2022

Exotek 22S alloy gearbox

Exotek release their ‘bullet proof’ gearbox for your high powered Losi 22S build. This heavy duty machined alloy gearbox keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie bar pointed straight. A direct bolt on for the Losi 22S series it weighs 43 grams and the set includes just the left and right gearbox case.

View more images of the gearbox here

February 15, 2022

Exotek B6.3 direct spur mount set w/ titanium bolt

From Exotek for the stock laydown/layback Associated B6.3-B6.2 top shafts, is this new super light alloy locked spur mount with titanium centre bolt for their lightest spur locker yet. Excellent for 17.5 stock buggy and high powered street eliminators, the mount and hardwares shown totals 5.1 grams. It uses a wider range of available spur gear sizes by Exotek and Kimbrough and allows for easy switching between a locked spur or slipper as track conditions warrant. It uses the stock top shaft for increased idler gear durability compared to narrowed top shafts.

View the complete set here

February 9, 2022

Exotek B6.3 drag car titanium axle set

Exotek have produced this super light titanium axle set for the B6.3 and B6.2 drag race cars. The use of titanium reduces the weight and rotating mass of your driveline for quicker acceleration. Over 40% lighter than the stock steel axles at only 3.5 grams each, these are for experienced drag racers only as titanium is lighter than steel.

Source: Exotek [exotekracing.com]

February 5, 2022

Exotek B6.3 HD alloy front bulkhead

From Exotek comes this heavy duty, 7075 alloy constructed 10 gram front bulkhead for the B6.3-B6.1, T6.1, SC6.1 and all ‘6’ series Associated 2wd buggies and trucks. This HRC (high roll centre) option raises the inner hinge pin by 1mm and has 2 settings for kick up, 25° and 30°, depending on which direction it’s mounted. Customised polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts.

Source: Exotek [exotekracing.com]

January 26, 2022

Exotek Racing XB2 7075 alloy idler gears

Exotek Racing have introduced these hard anodised 7075 alloy idler gears for the complete Xray XB2 series of gear boxes. Available in 38T, 36T and 25T, they are a must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with proper slipper adjustments.

View the other idler gears here