Red RC » Exotek

November 22, 2021

Exotek B6.3 brass C block hanger & wide rear tower

Two new items from Exotek Racing for the Associated B6.3 & B6.1 starting with this stealthy black coated brass C block hanger. Only for use with 73mm arms, the block weighs 24g and helps increase rear traction by adding weight at a low point under the gearbox. The part is finished with laser etching for easy identification. Also new is this wide stance rear drag racing shock tower for the B6 laydown and layback gear box. Made from glossy 4mm carbon fibre, it uses the stock rear shock and allows for an upright angle for more stability.

View more images of the new items here

November 15, 2021

Exotek B6.3 hard anodised idler gears

Fresh from Exotek Racing for the B6.3, B6.2 etc laydown gear boxes comes some new hard anodised idler gears. Machined from 7075 alloy there is a 39T and 26T idler gear which is a must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with proper slipper adjustments.

View the 26T idler gear here

November 10, 2021

Exotek 22 5.0 titanium axle set & 38T idler gear

Two new items for the TLR 22 5.0 from Exotek, starting with this super light titanium axle set. Suitable for the VHA buggy hubs only the new axles help reduce the weight and rotating mass of your driveline for quicker acceleration. Over 40% lighter than the stock steel axles at only 4.2gr each. Next up is a hard anodised 7075 alloy 38T idler gear, a must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with proper slipper adjustments.

View the idler gear here

November 3, 2021

Exotek 22S Extra long ladder wheelie bar set

This extra long carbon fibre wheelie bar from Exotek Racing for the Losi 22S Drag provides extra stable high speed passes. The longer bar gives you more stability than the short stock wheelie bar, for straighter and faster passes without needing to let off the throttle as often. A quick 2 screw adjustment helps raise or lower the bar that allows finer adjustments on the bar itself so that you can tune in the absolute perfect bar height. A must for perfect launches and competitive racing. This mounts to the stock 22S Drag motor guard and uses the stock wheelie wheels and is made of extra heavy duty 3mm carbon fibre with alloy support posts.

View more images here

October 25, 2021

Exotek Slash Drag shock tower & HD axle set

Two new items from Exotek for the Drag Slash and Slash Street Eliminator, the first being this heavy duty 4mm thick carbon fibre front shock tower. Much stiffer for more stable high speed handling, it uses the stock shocks and body mounts. It has optional shock mounting holes for more tuning options but requires removal of the stock body mount. Next up is their heavy duty hardened steel complete CVD axle sets and diff cups. Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets. The new diff cups uses 2 set screws instead of the straight pin to remove all of the slop and reduces vibrations.

View more product images here

October 21, 2021

Exotek DR10 heavy duty alloy differential case

Exotek have produced this heavy duty machined 7075 alloy differential case for the DR10. Perfect machined roundness makes for a free spinning transmission and a must have for high powered drag racing applications. This is much stronger than the stock plastic diff gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life. The set includes a diff case and diff cover, DR10 gear diff parts are required.

View more images of the diff case here

October 15, 2021

Exotek 22S Drag MK3 slipper set & spur gears

From Exotek is their new turbine cooling triple slipper disks for the Losi 22S top shafts for quicker slipper cool downs before the next pass. Provides added consistency due to 3 friction plates and slipper cooling via the extra heat sink fins that also spins as fan blades as the motor turns for increased air flow over the slipper plate therefore helping reduce heat glazing of the slipper pads which results in melted pads. The set includes 3 high grade LCF pro style slipper pads for Octalock type Exotek or Associated spur gears (gear not included). The slipper pads have a small 12mm inner slipper diameter for more surface area for improved slipper efficiency. For this set Exotek also offer high performance machined POM (delrin) spur gears that uses Associated style octalock type spurs and slipper pads. Available in 84T & 81T, the spur gears are 100% machined POM to insure true roundness and are much stiffer and truer than moulded nylon spur gears.

View the full set & spur gear here

October 7, 2021

Exotek 22S Drag shock towers & 7mm wheel hexes

Exotek have released a number of new options for the Losi 22S street eliminator car. Starting with this heavy duty 4mm thick carbon fibre front tower, that weighs only 10 grams. Factory racing looks and a much more rigid construction than the stock plastic tower for consistent handling on high grip tracks. It also has an extra outer shock mount location with the remaining holes that matches the stock geometry and works with or without the stock bumper and body mount set. There is also a wider rear tower so that you have the option to mount the shocks more upright or use the included stock settings that matches the stock geometry. Again using 4mm thick carbon fibre for an extra stiff tower that attaches to an alloy base for super secure mounting to your gearbox. The alloy base also provides more secure camber rod mounting for less camber flex with more consistent handling and the upright position of the pivot ball makes it easier for wrenching. Finally there is a pair of wide clamping 7mm heavy duty hex sets for slightly wider width meaning more stability and allows easy mounting, without spacers, of ProLine and JConcepts street eliminator wheels.

View the other new items here