Red RC » RC Maker

May 22, 2020

RC Maker introduce new T4’20 GeoCarbon optionals

RC Maker have introduced new GeoCarbon series option parts for the Xray T4’20 mid motor touring car. First up is the GeoCarbon steering brace that connects the top of the two posts of the steering to prevent excessive horizontal flex and bending under regular cornering force. Constructed from 1mm carbon with recessed areas, it is quite flexible to minimally alter longitudinal flex down the chassis. The result provides increased post rigidity with less force placed on the chassis holes and posts, as well as more consistent steering with marginally reduced front flex to increase steering response. These work with both aluminium and plastic steering bellcranks, and are also sized to cover the blue shields on the steering bellcrank bearings to keep things stealth.

Continue reading here

May 13, 2020

RC Maker Awesomatix damper O-ring tool V2

RC Maker have introduced the latest evolution of their popular damper O-ring tool for the Awesomatix range of cars. With the positioning of the P63 piston inside the damper vane being critical to the smoothness and longevity of the damper, the designers decided to make the process a whole lot easier. The V2 tool features the helpful O-ring seating and oil removing features of before, but now with an extra stick that inserts into the centre of the damper and when pressed down together with the main O-ring, seats the P63 in the optimal position whilst seating the O-ring. When using the tool, simply push the O-ring down and the excess oil will bleed out around the two contact patches of the tool on the O-ring, keep rotating the tool around to seat the O-ring all the way around its perimeter. No back and forward O-ring, then P63 positioning, no paper clips or drawing on wrenches. Simply push down and seat the O-ring, and at the same time the piston position will automatically be set once the O-ring is seated flat. Then spin the tool to remove excess oil from both on top of the O-ring, and inside the centre damper cavity above the P63 Piston. As a final step the main bearing is inserted and the damper ready to go. The damper O-ring tool V2 will work with both normal damper caps, and ADC.

View another image here

April 22, 2020

RC Maker A800MMX/MMCX SlimFlex carbon fibre chassis

RC Maker have introduced their new 2.2mm SlimFlex carbon fibre chassis for the Awesomatix A800 mid motor series, MMCX and MMX. Tested and developed for over 6 months by Ryan Maker and several team drivers around the world, the chassis is of a narrowed design all round to provide less scrubbing in corners, leading to increased corner speed. This was made possible thanks to bringing the battery mounts in slightly to allow an overall narrower chassis. The very front and rear of the chassis have also been narrowed thanks to removal of the additional holes for short arm” which are not often used anymore. Removing this material reduces scrubbing in the major spots on the chassis under chassis roll. One major change on the SlimFlex chassis is the removal of the through spool and diff cutouts. The designers have pocketed these only 1mm deep, which provides a much more rigid front and rear. This directs the flex back the centre of the chassis for more consistent handling. Many setups now are without the front C26 brace on the bulkheads, leading to excessive bulkhead flex, giving more steering but also making the car inconsistent. Thanks to the pocketed cutouts, there is now significant less horizontal flex between the bulkheads, so owners can run without the C26 brace and not get as much flex in the bulkheads on the horizontal axis, but maintain the caster flex to increase steering. As well as this, the pocketed cutouts also improve aerodynamics by not allowing as much air up into the chassis, which ultimately improves the downforce.

Continue reading here

March 26, 2020

RC Maker GeoCarbon A800 front damper holder tool

RC Maker have introduced their new GeoCarbon front damper holder tool for the Awesomatix A800 touring cars. The tool fits Awesomatix’s AM08-3 one piece damper mount and it was designed to assist in holding one side of the mount whilst installing the opposite side’s damper assembly. The recess places the holder at the correct height, and also allows to manoeuvre the damper holder forwards and backwards to line the hole up on the other side. Once the other side is installed, simply loosen the screw, slide the tool out and install the damper.

View more images here

March 23, 2020

RC Maker A800MMX slim battery mounts & battery weight

RC Maker have announced the release of new optional parts in the form of A800MMX GeoCarbon battery mounts for the use with slim-type battery packs as well as a slim LCG brass weight. Starting with the battery mounts, slim batteries are narrower and require smaller hooks for installation. RC Maker have modified their original GeoCarbon battery hook design for the narrower batteries, giving drivers a stylish option for securing the new range of slim battery packs. The set includes a 2mm spacer to raise the hooks for increased support, are adjustable left to right for correct balance and fitment, and also support integration with RC Maker’s floating battery mount sets for Awesomatix/Xray or Yokomo.

Continue reading here

March 20, 2020

RC Maker GeoCarbon Ti-Series on-road car stand

RC Maker have announced the release of their new GeoCarbon Ti-Series on-road car stand for 1/10th and 1/12th scale cars. Constructed from 13 separate individual parts, secured by aluminium gold plated screws, the car stand boasts elegance and ingenuity. The carbon fibre skin is supported by an anodised aluminium and titanium nitride skeleton, producing a lightweight, strong and long lasting car stand. The bottom of the posts are protected by rubber anti-slip pads, to ensure no scratching of the pit board or posts, and no unwanted sliding around. The top is insulated by thin, extremely durable anti-slip rubber pads to keep the carbon skin looking like new. The car stand is CNC machined and assembled in Australia and it is usable for most 1/10th and 1/12th scale on-road cars.

View more images here

March 17, 2020

RC Maker T4’20 SlimFlex carbon fibre chassis

Coming from RC Maker and made for the Xray T4 2020 mid-motor touring car is the new SlimFlex carbon fibre chassis. Tested and developed for over six months by RC Maker’s team drivers, the chassis will offer improved handling especially in low-med traction conditions. A new design sees the chassis narrowed all round to provide less scrubbing in corners, leading to increased corner speed. This increases flex substantially, so to counteract this, the designers have recessed the diff and spool cutouts instead of cutting them all the way through. Not only does this bring the chassis back up to the desired amount of flex, it also improves aerodynamic performance by not preventing air from under the chassis being forced up into the car, detrimental to handling. As well as this, RC Maker have removed the holes for the short arm blocks as they compromise the strength and accuracy of the chassis, and also alter the flex characteristics. Screwing weight to the car is now even easier thanks to the added front weight holes, these can be used to screw RC Maker’s “Weight Shift” front weights to the chassis, giving drivers a place to add weight, whilst also being adjustable left/right. All of these features combined make for a chassis which is easier to drive, with more traction and faster lap times, in both Stock and Modified classes. The chassis is precision cut and countersunk in house in Australia from high quality 3K 2.2mm carbon.

View more images here

February 18, 2020

RC Maker A800MMX GeoCarbon V2 bumper mount

RC Maker have introduced the V2 version of their popular GeoCarbon bumper mount for the Awesomatix A800 MMX and MMCX. Designed to be used with the kit P14-1X lower bumper mount, the upper carbon fibre brace increases the bumpers rigidity, and also the body post rigidity by offering more support around the post. The part is a direct replacement for the standard mount, and also includes a built-in brace to brace the bumper to the bulkheads, preventing the bumper bending in impacts and also saving the chassis. This part does not touch the bulkheads but clears by the slightest of margins as to ensure no tweaking. Constructed of high quality 3K 3mm carbon, it is lightweight and durable, and it fits all 2018+ models with AM78X1 bulkheads.

View more images here