Red RC » Reflex Racing

May 12, 2015

RSD RX4-15 aluminium chassis & servo mount bracket

Reflex Racing have introduced two new option parts for the Xray T4’15 in the form of the RX4-15 aluminium chassis and a carbon fibre servo mount bracket. Starting with the chassis, it is made out of machined 7075-T6 aluminium and it comes anodised a light shade of gray with silver chamfered edges to give the chassis a high-quality finish and premium look with the textured finish looks similar to a diamond dremel cut off wheel finish. The shape profiles for the RX4 -15 have been developed over the past year with a focus to provide your car a more consistent feel and less tyre overheating over a run. The design takes flex away from the bulkheads and moves it towards the centre of the car which results in a more stable car that is easier to drive at high speed.

Click here to continue reading

April 28, 2015

Reflex Racing RR10 WGT – Teaser Images

Reflex Racing are currently working on a World GT car based off of their RR12 1/12th scale car. The 1/10th pan car is pretty close to production from what is understood and the design sets a focus on providing more steering and less traction rolling compared to the cars readily available in the market. More information and images will become available in time for the release.

Click here to view another photo

April 6, 2015

RSD RX4-15 carbon fibre main chassis

Reflex Racing introduce the all-new RSD RX4-15 chassis for the Xray T4 2015 touring car. It is made from RSD 3K weave and available in a medium hardness 2.0mm and hard 2.25mm variant. The shape profiles for the chassis have been developed with a focus to provide a more consistent feel and less tyre overheating over a run. The design takes flex away from the bulkheads and moves it towards the centre which results in a more stable car that is easier to drive at high speed. Being made from “Quasi” carbon, which is stiffer due to the construction of the material, makes the 2.0mm chassis stiffer than the stock unit and the 2.25mm much stiffer. The 2.0mm chassis is recommended for most conditions, whether asphalt or carpet, with the 2.25mm being best used only in extreme high-grip situations.

Source: Reflex Racing [reflexracing.net]

March 3, 2015

RSD R12SS 1/12th scale bodyshell

Reflex Racing introduce the R12SS 1/12th scale bodyshell. Developed and sculptured in-house and manufactured in the USA the design was modified several times during development to fine-tune the balance in order to achieve maximum drivability. At 32g to 35g the body is around 5g to 8g lighter than comparable lightweight bodies and it is meant to offer more high speed stability than an AMR-12 while having a little more low speed steering. The body is usable in both Stock and Modified classes, it is made from .020 Lexan material and available now.

Click here to view another photo

December 15, 2014

RSD RR12 1/12th scale kit

Reflex Racing introduce the RDS RR 1/12th scale kit. Designed and developed in house at Reflex Racing the kit has several innovative features such as an integrated uni-mount shock/servo/antenna mount, and an adjustable wheelbase motor pod to make the car the most adjustable and versatile 12th scale in the market today. The car is also compatible with Xray or Team Associated side links, as well as Xray or Team Associated damper tubes.

Click here to continue reading

October 20, 2014

Reflex Racing RSD TC6.2 carbon fibre bulkhead braces

Reflex Racing’s RSD bulkhead braces for the Team Associated TC6.2 were developed in order to change the flex characteristics of the car. By bracing the bulkheads at the top deck screws, the flex points of the chassis are moved closer to the centre line, which increases high speed stability and control. Additionally the braces provide more on power traction at whichever end they are being used. When using both stiffeners, the car will stay a little bit flatter at high speed, will be easier on tires, the response will increase in tight corners and the car will be easier to drive in sweeping corners. Machined from high-quality carbon fibre the braces are a direct fit and they come as a set of two.

Click here to view more photos

September 17, 2014

Reflex Racing RSD7 2015 touring car kit

Reflex Racing introduce the RSD7 2015 electric touring car kit based on the Team Associated TC6.2. After close to a year of development on the TC6.2 platform, Reflex Racing have decided to package together their essential upgrades to release the RSD7 2015. The kit includes all the parts needed to build a rolling chassis kit and as it is based off of the TC6.2, the box includes the original TC6.2 chassis plus the RSD7 aluminium chassis, providing you with two different chassis to build with. Other option parts that made it into the box are the lightweight suspension kit, an aluminium inner servo mount, an adjustable carbon fibre battery stop, RSD TC6.2 springs, 315 pistons and soft bladders beside other gizmos. The kit is available now for pre-order and will become available end of September to early October.

Click here to view the included option parts

August 6, 2014

Reflex Racing RSD TC6.2 lightweight suspension kit

Reflex Racing introduce the RSD lightweight suspension kit for the Team Associated TC6.2 touring car. The parts not only shave weight, but also offer a revised geometry, with the front arms being wider and the rears being narrower, which makes the car more consistent and faster over a full race compared to the stock components. These parts are also far tougher and do not have quite the slop the stock parts have on the car. Included in the kit, that is available for pre-order now, are front and rear carbon arms, 4 degree C-hubs, rear hub carriers, outer hinge pins, arm shims, AE compatible rod ends and ball cups as well as pivot bushings and king pins along necessary hardware.

Click here to view more photos