Red RC » Accessories

April 13, 2007

3 Racing Rear Wheel Adapter For Tamiya F103GT

3 Racing Rear Wheel Adapter

3 Racing have released the latest version of their +2mm offset rear wheel adapter for the Tamiya F103GT which allows the car to corner better, and works with all touring car rims. By adding a hole on the adapter, you can easily insert a spanner inside and adjust the tightness of the ball differential without removing any parts, simply turn the wheel clockwise to tighten or anti-clockwise to loosen the ball differential.

Source: 3 Racing [3racing.com.hk]

April 13, 2007

Edit Foam Inserts for off road Tyres

Edit Foam Inserts

Edit, the optional parts wing of HPI Racing, has released a range of die cut foam inserts suitable for off road tyres that has been co engineered by World Champion driver Neil Cragg. Available for 1/10th or 1/8th off road these inner foams have been colour-coded and graded for hardness with all foam measured on a calibrated durometer and come available in soft black foam, measured at 35 degrees, and medium purple foam at 55 degrees.

Source: Edit [rc-edit.com]

April 12, 2007

M Mod parts for MBX5 and MTX4

M Mod Wishbone mount

We have shown you lots of parts from M Mod before, as well as All Mod, and today we have more parts to show you, this time only for Mugen. The first up, which you can see above is a rear lower wishbone pivot point for the MTX4 that has been made out of the trademark grey anodised aluminium and adds to the strength required around this area in the event of an impact. Also available from M Mod, for the MBX5 and the MBX5-T, is a part that combines the upper servo saver mount and the upper rear side front suspension pivot point in one part which adds greatly to the strength and stiffness of this entire area.

Click here to see the MBX5 part… content

April 11, 2007

LRP Brushless & Brushed Cooling Set

LRP have announced the release of their Brushless & Brushed Cooling Set, which is essentially a fan and heatsink combination. As we all know excessive motor temperatures lower the efficiency and the power of a motor and can also lead to permanent damage so with this new offering from LRP you will see a considerable reduction in motor temperature during the race which keeps motor power up. Suitable for all 540-type motors, the set features a blue anodised heatsink and an oversized cooling fan to remove the heat.

Click here for the full feature list… content

April 11, 2007

Xray T2 007 Narrow upper deck

Xray have released this new optional narrow upper deck for their T2’007 190mm electric touring car. Made from 2mm carbon, when mounted the car should be easier to drive because it increases overall traction and is recommended to be used on low-traction tracks, either asphalt or carpet.

Source: Xray [teamxray.com]

April 9, 2007

Team Azarashi lightweight wing

Japanese company, Team Azarashi, have announced their new lightweight rear buggy wing that will be available for sale in May. 20% lighter than the standard version this new wing will aid those racers that are looking for the smallest fraction of seconds to improve their performance. This product is sold as a set, that contains both the round-type (above) for technical courses and a straight type for high-speed courses.

Source: Team Azarashi [team-azarashi.com]

April 6, 2007

JConcepts Illuzion buggy wing & Ball cup sets

JConcepts Illuzion buggy wing - Black

A few months ago JConcepts released their effective and really cool looking Illuzion buggy wing and at that time it was only available in white and yellow. Today they announced that this wing will now be available in black, and just to recap about the product itself, it is designed for both 1/8th buggies and truggies and features durable through-rib design and recessed side dams for extra decal protection.

JConcepts also released some Ball Cup sets which are designed to fit all 1/10th scale off-road vehicles and come in black, white and yellow. Designed with performance as well as aesthetics in mind these newly designed low-profile ball cups have been designed for extra durability and added â€˜wheel to tie-rodâ€™ clearance. The set comes with 4 left and 4 right low profile ball cups, as well as 12 normal ball cups, included per package.

To see the ball cups in place click here… content

April 4, 2007

Trinity Mega Watt battery bars

Trinity have announced that they have updated their best selling silver “Watt Bars” with a new lower resistance, easy to solder, stronger design. The “Mega Watt Bars” now come with pre-bent tabs for the positive and negative speed controller connections.

“Mega Watt Bars” come packaged in 4,5 & 6 cell packages. Each package includes the bars from cell to cell as well as 2 pre-bent solder tabs for the plus and minus battery pack to speed control connection.

Source: Trinity [teamtrinity.com]