Red RC » Electric

August 18, 2017

Arrowmax 4mm & 5mm low-profile connectors

Arrowmax have introduced their new 4mm and 5mm low-profile battery connectors. Utilising a 6-point design and 24K Gold-plating, the plugs will offer a very low resistance for best possible performance while their pre-shaped design will make soldering nice and tidy. The low-profile button head improves clearance so the head will not interfere with the low top decks of today’s electric touring cars. The connectors come as pairs and they are available now.

Source: Arrowmax [arrowmax-rc.com]

August 17, 2017

TQ Wire 2-cell charge cable with 4mm/5mm connectors

Coming from TQ Wire is the 2-cell charge wire with 4mm/5mm stepped bullet connectors. 610mm long the charge and balance harness is made using high-quality 12AWG all-black wires, Gold-plated 6-point 4mm/5mm stepped connectors and it utilises an XH balancer plug. The cables are covered in nylon mesh for protection and to keep things nice and tidy.

Source: TQ Wire [tqwire.com]

August 15, 2017

Arrowmax 6000mAh 2S LiHV shorty battery pack

Arrowmax have expanded their range of high-voltage Lithium-Polymer batteries by a 6000mAh 2S shorty variant. Measuring 96x47x25.1mm the pack makes use of 4mm bullet-type connectors and it is built from high-performance 55C/110C LiHV cells. It can be safely charged up to 4.35V per cell but it can also be used in sanctioned racing and with a 4.2V per cell charge cut-off.

Source: Arrowmax [arrowmax-rc.com]

August 10, 2017

Muchmore Fleta ZX V2 6.5T Type-R 1/12th scale motor

Muchmore Racing are busy adding more variants of the new Fleta ZX V2 motor to their portfolio with the latest outcome being the 1S optimised 6.5T Type-R for 1/12th scale pan cars. Making use of the same teardown as the previous modified variants, the Type-R is specially tuned for 1-cell applications such as 1/12th scale modified classes thanks to a specific stator and rotor combination, resulting in smooth and controllable acceleration.

Source: Muchmore [muchmoreracing.net]

August 7, 2017

LRP USB Bridge V3

Coming from LRP is the all-new USB Bridge V3 that allows to change firmware versions on the FlowX speed controller. The device comes including an USB cable, 200mm sensor wire as well as a manual and along with the V3 version of the USB Bridge, LRP also have the updated v2.2 firmware tool available for download to support the FlowX series speed controller. In addition to the FlowX the USB interface also supports the original Flow speedo as well as the iX8 and Spin controllers.

Source: LRP [lrp.cc]

August 3, 2017

Muchmore Impact LCG Max-Punch 4300mAh LiPo pack

Muchmore have expanded their range of high-performance LiPo batteries by the new Impact LCG Max-Punch FD2 4300mAh 2S pack. Measuring 95.8×46.8×22.5mm and weighing it at 192g the battery is of a low-profile design while the high-performance 120C cells make for exceptional power output in modified and stock classes. The hardcase battery utilises standard 4mm bullet-type connectors and it will hit stores very soon.

Source: Muchmore [muchmoreracing.net]

August 3, 2017

Team EAM 1S 6100mAh Graphene LiPo battery pack

Team EAM have introduced their new Graphene series 3.7V 1S 6100mAh LiPo battery pack. The all-new Graphene formula was designed for the lowest resistance and high voltage output all in combination with improved reliability. The hardcase pack weighs in at 153g and utilises 5mm bullet connectors.

Source: Team EAM [teameam.com]

August 2, 2017

Muchmore Fleta ZX V2 ER Fixtiming Spec BL motor

Muchmore are busy adding more variants of the all-new Fleta ZX V2 brushless motor to their portfolio. The latest outcome is the ER Fixtiming Spec motor that builds on the same teardown as the Type-ER but its fixed timing design makes it ideal for spec racing classes and as handout motor. It comes as 13.5T, 17.5T and 21.5T variant and will hit stores very soon.

Source: Muchmore [muchmoreracing.net]