Red RC » Products

December 6, 2012

PSM Racing RC8.2 shock towers

PSM Racing have released three new shock towers for the Associated RC8.2. Made from high quality 4mm carbon fibre there is one new rear tower and 2 new front towers. The rear & both front towers features additional mounting holes for the top of the shock absorbers and weigh in at only 23.5grams, 14.6grams and 14.6grams respectively, while the special front tower also has multiple mounting holes for using a linkage in place of the top wishbone.

View the other new towers here

December 6, 2012

Shepherd extra-soft floating piston spring

After a lot of testing Team Shepherd have developed the new extra-soft floating piston spring. On some tracks less rebound of the shocks is needed, especially on bumpy tracks. The new springs are much softer than the standard ones and have much more space to move than the soft ones. Used in the Shepherd “Velox Revolutionary Shocks” they provide much less rebound compared to the other ones. Sold in a pair of two they can be used in the Velox V8 as well as the Velox V10 to fine-tune the shock-setup and are available from now on.

Source: Shepherd [team-shepherd.com]

December 6, 2012

Associated Apex Touring V-Type RTR

The Qualifier Series is Team Associated’s exciting new line of sport-level products that are designed to be fun above all else, easy to use, durable, lower cost, and provide an easy way to get into the RC hobby. When great looks and high performance are combined with quality features and value pricing, it becomes the ultimate sport product. When all this is offered from Team Associated, it’s nothing short of awesome. The Apex Touring Car is the newest release from the Qualifier Series. It’s a fully assembled, Ready-to-Run, Reedy brushless-powered, 4WD touring car that even includes a Reedy WolfPack 6-cell battery wired with a Deans power connector.

View more details here

December 5, 2012

Schumacher CAT K1 1/10th 4wd buggy

Schumacher have unleashed their latest CAT with the introduction of the K1, an ultra modern 1/10th scale 4wd electric powered buggy. Schumacher’s R&D department and highly skilled international racing team have developed a simple, yet highly efficient twin belt transmission, with optimised motor position and belt length that offers equalised front and rear drive. The CAT K1 also features a long top deck that promotes controlled flex, improved steering geometry for millimeter perfect control plus a whole host of detailed changes and improvements.

View more details & images here

December 5, 2012

Xray NT1 alu lower engine mounts

New from Xray for the NT1, these lower engine mounts are made from tough aluminium alloy, and include factory-pressed locating pins. Lowered by 1.5mm compare to the standard engine mount it lowers the engine position to push the weight as low as possible to lower the CG of the car. Makes the car more stable and makes the car roll less and less traction roll. Must be used with the 2012 NT1 chassis and 30mm aluminium flywheel reverse XCA-flat.

Source: Xray [teamxray.com]

December 5, 2012

Pro-Line Pro-Bond tire glue

Pro-Line knows tires and understands that the strongest bond possible between the tire and wheel is a critical aspect of performance and tire longevity and so has developed Pro-Bond Tire Glue. The first challenge was developing the strongest glue possible while also having the correct flow characteristics and dry time that RC Racers and Bashers desire. This Glue has a hold strength of 3,200 PSI which is the highest strength of any tire glue available and their unique glue formula also provides the fastest drying glue possible while drying crystal clear with no yellowing or whitening found when gluing tires with other glues. A super soft and squeezable round bottle while the applicator tips are re-usable unlike the throw-away tubes and have the perfect size applicator hole for gluing tires.

Source: Pro-Line [prolineracing.com]

December 5, 2012

Pro-Line Bulldog for Kyosho RB6

Pro-Line have released their Bulldog body for the Kyosho RB6. This body has been designed specifically to fit the Kyosho buggy chassis yet still provides the unmatched performance characteristics that define Pro-Line’s BullDog body line. Great care was taken in refining the BullDog design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The roof has been lowered in the rear and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency.

Source: Pro-Line [prolineracing.com]

December 4, 2012

TOP Photon EX V2 blocks & uprights

New for the Photon EX from TOP are these version 2 steering blocks and rear hubs. The steering block is designed with improved ackermann positions, while the rear hub provides added roll center and camber gain adjustments.

Source: TOP [top-racing.jp]