Red RC » P On Road

January 24, 2017

Team Associated Factory Team TC ride height gauge

Team Associated have introduced their new Factory Team touring car ride height gauge. It measures steps from 3.0mm to 6.0mm in 0.2mm increments, with a half-step between 6.0 to 7.0, allowing to set ride height with finer tuning adjustments, making it ideal for 1/10th touring cars and 1/12th pan cars. The gauge is machined from high-quality aluminium, it comes blue anodised and with easy-to-read laser-etched markings.

Source: Team Associated [teamassociated.com]

January 24, 2017

Horizon Hobby supported JP Montoya takes ROC title

This past weekend not only the annual Reedy International Offroad Race of Champions was held but it also saw the running of the iconic Race of Champions, an annual event that draws many of the biggest names from across the world of racing. Formula 1, NASCAR, World Rally Cross, MotoGP – they all come to one spot where they go head-to-head on the same track in identical cars. The 2017 edition, held at Marlins Park in Miami, Florida, saw Colombian motorsport great, Horizon Hobby sponsored Juan Pablo Montoya taking on a field of the world’s best drivers in front of 15,000 fans to win the title of Champion of Champions. In addition to Montoya, this year’s roster of competitors included other notables such as Tom “Mr. Le Mans” Kristensen, four-time Formula 1 World Champion Sebastian Vettel (and last year’s ROC Champion of Champions), Felipe Massa, David Coulthard, Kyle Busch, Travis Pastrana – and the list goes on. This year’s event also featured a brand new figure-of-eight track that challenged drivers even more. The best-of-three Grand Final boiled down to a battle between Montoya and Kristensen in which Montoya took two straight heats to become the undisputed Champion of Champions.

Source: Horizon Hobby [horizonhobby.com]

January 24, 2017

T-Works BD8 alloy motor & floating servo mount set

T-Works have released the aluminium motor mount and floating servo mount set for the Yokomo BD8 touring car. The assembly consists of the floating servo mount and steering set, the motor mount and also a carbon fibre centre stiffener with all parts also being available separately and as convenient combo set. Using the parts on their own or in combination allows to widely adjust the chassis flex by using the standard – chassis mounted – steering or a floating steering arm setup, the carbon fibre chassis brace allows to take influence in the centre flexibility while the rear motor mount is understood to also allow for chassis flex adjustments while offering a motor fan mount for 30mm and 40mm units. The stubby mount directly attaches to the motor bulkhead and thus does not disturb natural chassis flex. All parts include suitable mounting hardware in the form of gold-anodised screws.

View more images here

January 24, 2017

Techra T4 zero degree aluminium C-hubs

Techra have introduced zero degree aluminium C-hubs for the Xray T4 touring car line. The castor hubs are machined from high-quality 7076-T6 aluminium and they comes in Techra’s signature black and orange anodising. The hubs are usable in the front and also in the rear of the car, the latter with Xray’s ARS system installed, they come as a single item usable on both the left and right hand side of the car, and including long and short steering kingpin bushings.

View another image here

January 23, 2017

Essex Winter Series Rd4 – Report

The penultimate round of the Essex Winter Series championship took place this weekend at the popular venue in South-East England. Despite the freezing temperatures outside, the fully heated hall and pits saw most racers resorting to t-shirts and the track groove up quickly. With Championship leader, and winner of all three events so far, Elliott Harper on international duty for Schumacher, others would be hoping to take advantage and a useful points haul from the day. Olly Jefferies would be the one to make the most of that – despite tough competition, the Xray driver went on to top all four of the qualifying rounds. However, behind Olly, tight battles for the remaining A-final places raged throughout each run. Infinity’s Andy Moore, running the Infinity prototype touring car for the first time in the UK, was Olly’s closest challenger in the opening qualifier, ahead of Olly’s Xray team mate Alexander Hagberg, the Team Associated cars of Chris Grainger and Alan Bickerstaff, and Kyle Branson, also running the new Infinity car.

Continue reading the report here

January 23, 2017

Protoform WCICS Rd4 – Report

The Protoform Western Canadian Indoor Championship Series round 4 landed in the capital city of Edmonton, Alberta. Hosted by NASCAR, it was a very cold Winter weekend, perfect for indoor racing. Running on new black carpet, NASCAR took their track design to a completely different level, with a beautiful layout complete with green felt inserts. In the Touring Modified class top Western Canadian racer, Awesomatix’s Wayne Mah was in top form at his home club, and dominated the first two A-mains. Xray teammates Blake Bell and Danny Buck would each take a 2nd, and fellow Xray driver Luke Pittman would take 3rd both opening rounds. With Wayne’s place secured, and sitting out A3, Blake Bell would lock up 2nd overall, and Luke would take 2nd over top privateer Josh Carter to take the final podium spot. Danny Buck shown in podium picture but points were later corrected to Luke.

Continue reading the report here

January 23, 2017

XRD sign Mattia Collavo

XRD have announced the signing of Italian frontrunner Mattia Collavo. The ENS A-main finalist and 2015 Italian national champion will power his ARC R8.0 and BMT 701 cars with the high-end F.T. Line version of the Italian engines throughout his 2017 campaign that will hold races such as the Italian Nationals, select ENS events and the Italian Manufacturer’s championship as well as other major national and international level meetings.

Source: F.T. Line [ftlineteam.com]

January 23, 2017

Yeah Racing MF01X 33mm aluminium driveshafts

Yeah Racing have introduced a 33mm aluminium driveshaft set for their MF01X upgrade kit. Made from durable high-quality 7075 aluminium and coming blue anodised and with steel wheel axles, the driveshaft are specially designed for Yeah Racing’s MF01X upgrade kit. Due to their design the CV-style driveshafts offer improved efficiency over standard dogbone driveshafts and they come in sets of two.

Source: Yeah Racing [yeahracing.com]