Red RC » P On Road

July 26, 2017

Oliver Havranek wins Austrian 200mm Nationals Rd3

Round 3 of the Austrian 200mm Nitro Nationals was held at the Graz track. Xray’s Oliver Havranek swept the qualifiers to start from pole position into the main final that would see the TQ holder struggle in the opening minutes. Later Oliver would keep his head down and he managed to catch up with Igor Liptak. After a tight fight Oliver was able to get past Igor and soon after it was started to rain heavily so the organisers had to stop the race that was scored at the current standings, handing Oliver the win from Igor in 2nd.

View the final results here

July 26, 2017

Maclan Racing MR8.2 1/8 sensored brushless motor

Maclan Racing have announced the new MR8.2 1/8 brushless series of motors. The MR8.2’s new design is set to deliver balanced power and smoothness thanks to a combination of a 12-slot stator with a strong, staggered 4-pole, 8-magnet rotor that is constructed to be smooth and powerful while increasing durability. An all-new error-free sensor unit design with separate sensor magnet will minimise the signal noise the often can damage speed controllers. The series will include 1500kv, 1950kv, and 2150kv buggy style motors as well as a dedicated 2100kv truggy variant.

View more images here

July 26, 2017

RC Prostyle X1 2.25mm carbon fibre chassis

Coming from RC Prostyle is a 2.25mm carbon fibre chassis set for the Xray X1 formula car. Constructed from high-grade U.S. made carbon fibre the chassis was designed especially for asphalt racing in medium to high-grip conditions. The super-narrow design and raised side links increase ground clearance during cornering which results in less scrubbing and improved corner speed. Included come two types of link plates, one for the standard Xray links and one for shorter 65mm links such as the ones used by Roche or Yokomo – using the shorter links will help gain on-power steering. Included in the set are the chassis, rear pod plate, side link plates as well as mounting hardware.

View another image here

July 25, 2017

Traxxas 4-Tec 2.0 brushless & brushed chassis sets

Traxxas’ new 4-Tec 2.0 1/10th scale 4WD car is soon also available in two additional variants without body shell. Coming as brushless-powered VXL and brushed standard variant, both make use of the same modular chassis, strong suspension and drivetrain components and they also include a 2.4GHz TQ radio system. Included with the VXL set is a Velineon VXL-3s electronic speed control, a Velineon 3500 brushless motor as well as Traxxas’s TSM stability management. A one-piece steel driveshaft and adjustable steel turnbuckles and steering links round out the upgraded package. The standard brushed variant comes with the XL-5 speedo, a Titan 12-Turn 550-class motor, alloy centre driveshaft and rigid composite steering links and turnbuckles. The cars can accommodate most of today’s 200mm touring car and GT body shells and they will hit stores very soon.

View more images here

July 25, 2017

Swiss McBest Cup Rd5 & Rd6 – Report

Round 5 and 6 of the Swiss McBest Cup were recently held in Herblingen. Run with “hand-out” engines and fuel the qualification format is also special as the 7-minute qualifiers have a mandatory pit stop. Round 5, run on Saturday saw Xray’s Martin Wenger coming out on top in the 1/8th class from Shepherd racer Stefan Graber 2nd and Nick Zünd 3rd.

Continue reading the report here

July 25, 2017

RC Maker Awesomatix LS1/LS2 Ackermann plates

New from RC Maker are graphite Ackermann plates for the LS1 and LS2 steering racks. Coming in a set of three and including 1mm, 1.5mm and 2mm plates, they make adjusting the steering Ackermann a lot easier and faster. Drivers only need to undo the ball-studs on the steering plate enough to slide the shims in, then re-tighten. The plates are ultra-lightweight and durable, and allow 1mm to 4.5mm of Ackermann adjustment overall.

View another image here

July 25, 2017

Arrowmax 20mm chassis droop gauge

Coming from Arrowmax is their new -3mm to 10mm droop gauge for 1/8th and 1/10th vehicles. Designed for the use in combination with 20mm chassis blocks the CNC-machined alloy gauge comes black anodised and with the company’s signature golden anodised details.

Source: Arrowmax [arrowmax-rc.com]

July 25, 2017

IGT8 4-shoe GT clutch set

Coming from IGT8 is a new 4-shoe clutch set. The clutch provides a wide range of tuning options, including a very aggressive setting for high traction GT racing. Looking similar to other designs, its unique initial spring preload ensures a more consistent engagement during extended runs where a good clutch is critical. The clutch fits the IGT8 GT and most GT cars.

Source: RC Target [rctarget.com]