Red RC

February 1, 2019

ARC R8.2 1/8th nitro on-road kit

ARC have released first details of their forthcoming R8.2 1/8th nitro on-road kit. The car is based on the successful R8.1 and features an all new 2-speed adapter that is 4g lighter than the previous part to reduce weight and increase drivetrain efficiency. An all-new rear suspension block moves the suspension pins and thus lower arms 3.5mm towards the centre, creating more side bite and stability while longer arms retain a proper geometry. The arms are optionally available in hard, standard or soft compound to adapt the suspension to all requirements and track conditions. Also new with the R8.2 is a chassis weight adjustment system that allows to change the weight bias in a wide range by using adjustable weights or braces. Another area that received a make over is the upper deck that now incorporates a laydown throttle servo, not only to lower the overall centre of gravity but also to help equalise chassis flex and optimise weight distribution left to right. ARC will also release an electric 4S LiPo conversion kit for the use with shorty batteries, allowing to run the car both in nitro or electric specification.

View another image here

February 1, 2019

Muchmore long belt-type tyre warmers

Made for the use with Muchmore’s CTXW and CTXW Pro tyre warmer units are long belt-type tyre warmers. They are ideal for 1/10th off-road and 1/8th GT tyres due to their 440x60mm dimensions. They easily wrap around larger diameter tyres, are size adjustable using hook and look straps and feature 800mm connector wires for easy handling. The tyre warmers come in 4-piece sets.

View more images here

February 1, 2019

JConcepts 2019 Finish Line apparel

JConcepts have introduced their new 2019 Finish line T-shirt. The angled and distressed checkerboard design in the background represents the finish line and for any racer, getting across first is what matters. The new JConcepts logo pops with authority and with a racers lightning bolt separating the artwork, speed and quickness are always at the forefront of this design. The T-shirts are made from stealth black 100 percent cotton material and they are available in adult M to XXXL sizes.

Source: JConcepts [jconcepts.net]

January 31, 2019

JConcepts ET410 Finnisher truck body shell

Coming from JConcepts and made for the Tekno ET410 1/10th scale 4WD truck is a dedicated Finnisher body shell. One of the latest classes to hit the scene is the 1/10th truggy class and Tekno has been leading edge in this department with the release of the ET410. JC’s Finnisher body incorporates pre-dimpled locations for the ET410 and it features a slight cab forward, raked windshield and aggressive stance to highlight a performance oriented core. A wide front hood scoop allows plenty of clearance for the unique shock geometry and the body incorporates a large centre fin which begins on the roof line and finishes just past the half-way point on the bed. Chin spoiler, headlight and grille protect the front-end from unwanted up-drafts during flight while the supplied decals stand-out like an 18 wheeler. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum outdoor performance. The new body is produced with name plates which provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement. Each body comes with window masks, decal sheet, and rear S-Type wing.

View more images here

January 31, 2019

Team Associated RC8B3 shock tower covers

Available in Team Associated’s Shapeways 3-D-printing store are new shock tower covers for the RC8B3 and RC8B3.1 series of biggies. Made in two different variants for both the FT front graphite and FT front aluminium shock towers, the covers help to protect the parts from impacts, minimising scratches and also delaminating on the carbon part. The covers come in sets of two, they require the use of longer 3x26mm SHCS screws and are available directly through Team Associated’s Shapeways store.

View more images here

January 31, 2019

WRC NTX.3 1/10th 200mm nitro touring car kit

Italian company WRC have introduced their new NTX.3 1/10th scale 200mm nitro touring car kit. The car only received some minor upgrades compared to the NTX 1.2, such as new shock absorbers, an upgraded clutch bell and a new plastic composite material for improved quality. Standard features include an aerodynamic ground effect front bumper and rear diffusor, symmetric suspension components for easier spare parts management, optional adjustable balance weights and an innovative magnetic brake return system. Te kit is rounded out by a floating radio plate system.

View more images here

January 31, 2019

Brian Lewis sweeps Forever Heroes Race

The 3rd annual Forever Heroes race was held in Albany, Georgia recently. The 2-day event was hosted by Chehaw Raceway and drew a little over 100 entries. In the Pro Nitro Buggy class Brian Lewis took the TQ and he went on to win the A-main by five laps, leaving behind Brian Peterson in 2nd and Chad Brinkley in 3rd. In the Pro E-Buggy A-mains Brian would secure wins in A1 and A2 for the overall from Justin Kinsey 2nd and Brian Peterson 3rd.

View the Pro E-Buggy podium here

January 31, 2019

Xray Racing Series Greece Off-road Rd1 – Report

The opening round of the Xray Racing Series Greek Off-road was held at the Fanatix Racing Track in Athens. Cold weather and changing track conditions kept the racers on their toes, looking for the best possible setup. The 2WD Buggy pilots faced a lot of difficulties to find the right setup for the slippery and slower getting track. While the drivers scored 12-lap runs in the qualifiers, in the finals only 9-lap runs would be possible. Ultimately it was Manos Kalantzakis with the win from George Kalantzakis and Stelios Kourkoumelis.

Continue reading here