The 3rd round of the Hessen Cup was run at the Ober-Mörlen track as part of the qualification for the German 1/8th off-road nationals. 114 drivers signed in for the race that was run under almost sunny weather conditions. In the 1/8th E-Buggy class Mugen’s Maximilian Cordts took the win from Luca Bethke and Thorsten Müller.
Click here to continue reading
The 2014 edition of the International Dirt Meeting Greece attracted not only a good amount of national drivers but also some international guests. Run in very hot weather conditions at the Hobby Track Serres the race saw Mugen’s Davide Tortorici taking the win with his TOP-powred buggy from Dimitris Tsigos (Mugen/Ninja) and Kostas Zagorisos (Xray/Alpha).
Source: Mugen Seiki [mugen.eu]
JConcepts introduce their popular Dirt Webs tyre tread for 1/10th short course trucks with the SCT Dirt Webs tyre. Based on the design ideas of Brian Kinwald and Jason Ruona the tyre combines the Pressure Points tread with uniformly positioned web-bars for added stability. This makes for increased forward traction while inside positioned horizontal and vertical bars help with side bite. The outer edges feature a single rib on each side which proves extra side-bite during heavy cornering and side-loading characteristics. The Dirt Web thread sits on the proven Bar Code tyre carcass giving the original wide-body tyre a low profile and appearance allowing clipped tread to extend all the way to the outer edges. Available in multiple compounds, the Dirt Webs can easily be matched to any track conditions ranging from indoor clay, indoor dirt to outdoor hard-packed or treated clay or dirt.
Source: JConcepts [jconcepts.net]
KO Propo’s RSx one10 Response low-profile servo is now also available in three different colour variants. Offering 0.07s of transit time and a torque of 9.0kg-cm at 7.4V input the servo offers the same specifications as the standard servo but your choice of a red, purple of blue middle heatsink section makes it now even easier to colour match the chassis and accessories. Other features include a coreless motor and gold-plated connector contacts.
Click here to view the colour variants
New from the Reckwald brothers’ own Reckward Tuning brand comes this set of wheel axles for the RB One and RB E-One. Fitting both the front and rear of the buggy the CVD wheel shafts are machined from high-quality 7075 aluminium and offer a lower weight for reduced rotation mass and unsprung weight resulting in improved car performance on the track. The axles include grub screws for the wheel adapter cross pins and are usable on both the competition and RTR variants of the RB One and E-One.
Source: RMV [rmv-deutschland.de]
The 4th round of this year’s Swiss 1/8th off-road championship took place in Gland near the Lake Geneva with about 130 entries. The TQ went to Swiss champion and Top 25 Euro driver Jeremy Pittet in front of Robin Frischkopf. At the end of the lower finals the track started to become bumpy and rutted making it not easy for the main finalists, lead by pole position holder Yael Zurfluh and Robin Frischkopf. The 45 minute final was clearly led by Yael with Robin Frischkopf, Joachim Kallen and Jeremy Pittet fighting for 2nd place. Jeremy ran into problems early so the fight for the runner-up spot was on between Joachim and Robin. Both swapped positions several times while being on different fuel strategies. With leader Yael being only a couple of corners in front Robin started to attack near the end of the final but problems while lapping backmarkers cost him dearly and had him falling back to 3rd place. At the end Robin also ran out of fuel but this incident had no further influence on the result. At the end Yael Zurfluh (TLR) took the win from Joachim Kallen (Kyosho) and Robin Frischkopf (Xray).
Source: Xray [teamxray.com]
Made for Losi’s DBXL large-scale buggy is this double arm aluminium steering set from Area RC. The set includes new inner aluminium steering bellcranks with the servo saver side offering a dual arm setup for the steering servo links meaning the steering assembly is actuated by two and not just one steering link, which is meant to make for a more precise and more reliable steering action. At the same time the dual links on the servo arm will lower the stress on the servo resulting in improved durability of the highly stressed part. The set is available in red, black and silver colour and also includes a reinforced servo saver spring and a ball-raced aluminium steering link.
Click here to view the installed steering assembly
Team Associated introduce a new Factory Team ball bearing ses for the B5 and B5M buggy. Including ball races for the front axles, the rear hubs, and the gearbox the kit is ideal to replace worn out bearings. A blue rubber seal protection on one side makes the bearings, that are also available as separate 4-piece packs per size, more robust when the going gets tough.
Source: Team Associated [teamassociated.com]
