Red RC » P Off Road

June 25, 2014

Carsten Keller wins at German nats qualifier in Kürten

The second of only two Western Germany 1/8th off-road regional rounds was run at the Modellfreunde Kürten track. Kyosho’s Carsten Keller was able to take the win in the 40 minute final despite being hindered by a wrong tyre choice. At the end he took the win some two laps ahead of Jan Sievert with Sven Sievert finishing another lap down. Maik Wiesweg and Chris Kammann completed the top 5 result.

Source: Spielzeugautorennfahrer [spielzeugautorennfahrer.de]

June 25, 2014

Kyosho FO-XX 1/8th basher truck

Kyosho have released first information and photos of the FO-XX 1/8th scale basher truck based on what appears to be a revamped Twin/Mad Force chassis. Featuring a lightweight vertical plate chassis with inner dirt shields and front and rear rigid axles the truck resembles a mud-slinging Formula Off-Road vehicle with its paddle-type tyres and scale bodyshell. Threaded big bore shock absorbers make for improved off-road performance while a front bumper with light buckets not only look cool but also protect the chassis from the rigours of off-road racing. The FO-XX comes ready-to-run including a 2.4GHz radio system, a waterproof high-torque steering servo and your choice .25 big block nitro motor or a high-performance brushless system.

Click here to view more photos

June 25, 2014

Rodrigues wins at Southern Portuguese regionals Rd3

The 3rd round of the Southern Portuguese 1/8th off-road regionals was held at the Evora track under changing weather conditions that put the drivers and equipment to the test. While the first semifinal could be run under dry conditions with Vasco Rodrigues taking the win, the 2nd semifinal had to be stopped and later on restarted due to rain pouring down creating some mess on the track. The main final then had Flavio Matias leading for the first 15 minutes until a bad tyre choice for the drying conditions hindered Flavio, allowing Vasco to close up. Both battled for the next 10 to 15 minutes but Flavio was not able to hold the pace and this gave Vasco the advantage he needed to win the race. Antonio Peixe grabbed the 2nd spot in front of Flavio Matias who was able to secure the 3rd and final podium spot.

Source: Xray [teamxray.com]

June 25, 2014

Pedro Miguel Sousa wins at Portuguese regionals Rd3

The 3rd round of the Portuguese 1/8th off-road Northern regionals was held at the Vilela track with over 40 entries. After the semifinals Francisco Ferreira put his buggy on the pole position on front of Pedro Miguel Sousa. The final had Francisco leading the majority of the race with Pedro being the only driver to keep up with his team mate’s pace. With some 3 minutes to go Pedro made a move on the leader to take the 1st position that he then kept until the end of the race to take his 3rd consecutive victory in the championship. Francisco Ferreira managed to conserve the runner up spot while Ricardo Martins grabbed the 3rd place coming from 5th on the grid.

Click here to view the top 10 result

June 25, 2014

Arrowmax B-Max4 III rear 50g brass weights

Made for the use with the Yokomo B-Max4 III are these 50g brass weights for the rear part of the chassis. Offering a cool shiny look the weights come laser etched with the Arrowmax logo and they help to fine-tune the weight balance of the buggy for improved performance on high-bite surfaces.

Source: Arrowmax [arrowmax-rc.com]

June 25, 2014

Powerstar PL-1207 plastic case low-profile servo

The Powerstar PL-1207 low-profile servo is now also available in a plastic case variant with different colour middle heatsink sections. Offering a torque of up to 12kg-cm and a speed of up to 0.074s at 6V input, the brushless servo with mixed stainless steel and titanium gears is good for the use in 1/10th on-road and off-road vehicles alike. It weights in at 45g and is available in four different colour variants, red, orange, blue and light blue, to match with the colour scheme of your car.

Source: Powerstar [powerstar-racing.com]

June 25, 2014

Arrowmax B-Max rear knuckle set & multi shock clamp

Arrowmax have a rear knuckle set for Yokomo’s B-Max line of 1/10th buggies and the V3 version of their multi shock clamp tool available. Starting with the Yokomo option part, the rear knuckle set is designed for the use both on the B-Max2 and B-Max4 buggy and includes two blue anodised rear hubs, carbon fibre camber link mounts, rubber-sealed ball bearings and a hardware set. Six different mounting positions for the upper camber links give additional setup options while overall rigidity is improved at the same time as the set replaces the stock plastic hubs.

View more details here

June 25, 2014

Team Powers Xbooster capacitor module

Team Powers USA introduce the Xbooster capacitor module for the use with 2S LiPo applications. Designed to be run in parallel with the battery, the Xbooster will support the LiPo battery under heavy loads to help with acceleration and runtime. When run in stock classes and with the Team Powers Radon ESC series it is recommend to replace the original triple capacitor board with the module while in modified classes it is beneficial to use both in parallel.

Source: Team Powers [teampowersusa.net]