T-Works have introduced a set of aluminium side guard screws for the HB Racing D817 off-road buggy. Made from aircraft-grade 7075-T6 aluminium and coming with a silver finish, the screws save some weight on the outer parts of the chassis while also adding visual impact. The fasteners are direct replacements for the stock parts and they come in sets of ten.
Daniele Ielasi took the win at the first round of the EFRA GP Series in what was a surprising twist of events, the former 1/10 200mm World Champion producing an excellent performance and his package proving to be tough and consistent in a final that saw a lot of drama. The main kicked off with Simon Kurzbuch starting well from pole and never letting anyone come near to his lead, and despite a charging Balestri trying hard to keep his Infinity in contact with the Shepherd, the Swiss managed to open a gap. Behind them it would be Collari, Picco and Ielasi swapping positions with the latter settling into 3rd, Picco 4th and Collari dropped down to 8th with a broken glow plug. Right after the 25 minutes mark Balestri would crash his Infinity into the barriers entering the straight, the heavy contact leaving the Italian with a broken rear left wishbone and promoting the fighting duo of Ielasi and Picco into podium positions, with Vrijelink now 4th.
Continue reading the report here
Intech Racing have introduced new aluminium lightweight aluminium chassis for the ER-14 and ERSC-10 1/10th scale off-road vehicles. The ER-14 specific part is machined from 2.5mm alloy and it sports excessive machining to save about 20 percent of weight while the 3mm ERSC-10 part is about 15 percent lighter than the stock chassis. Both main plates are machined from 7075-T6 aluminium and they are hard anodised for wear and looks.
The opening round of the Spanish 1/8th Nitro Buggy national championship was held in Lebrija this past weekend. Rainy weather made for some challenging racing conditions and the event was also cut short and in the end it was Mugen’s Juan Carlos Canas who took the win in the 45-minute A-main from record national champion, Robert Batlle (Mugen) with HB Racing’s Ignacio Candel coming in third.
Singapore’s Urban Astro Buggy Championship held its third event of the 2017 season this past weekend. The race was concurrently a Singapore national series points scoring event and in the 2WD Buggy class, the battle for TQ was on between Esmail Apandi, Dennis Chiang and Kum Yew and it would come down to the third qualifying round. Despite running in the earlier group, Esmail master the slightly wet conditions to secure the overall TQ with a scintillating run in Q3. In the finals, Esmail took A-main leg 1, but Dennis came back with a strong performance in leg 2 to take the win and force a decisive leg 3. In final main it was a close battle all the way, but Esmail eventually managed to maintain his advantage to seal the win while Dennis finished 2nd, with newcomer Andrew Tow coming in 3rd.
Continue reading the report here
Coming from Roche are new products for the Rapide P12-2017 and F1 on-road pan car kits. First up is a M2.5x6mm cap head screw kit for the P12-2017 1/12th scale car. The red anodised screws securely hold the wheels in place while adding visual impact and ease of use. The fasteners are usable with virtually every 1/12th scale rear wheel and they come in sets of 8. Also new is a 3-piece set of Grade 5 titanium turnbuckles for Roche’s F1 kits. The spanners are a direct replacement for the stock parts, they offer a low weight and improved rigidity.
View the titanium turnbuckles here
The penultimate round of the Finnish Winter Jumps electric off-road series was held at the Estonian city of Tallinn this past weekend. Team Associated’s Joona Haatanen showed another impressive performance, setting the pace right from the start with only Joel Valander and Karri Salmela being able to challenge Joona. The young man would set the TQ in both the 2WD and 4WD buggy classes and he also came out on top after the A-mains, taking the win from Team Associated teammate, Karri Salmela in 2WD while Max Mört (PR Racing) had to settle for third. In the 4WD class the podium was completed by Joel Valander (Xray) in second and Karri Salmela (Team Associated) third.
Gravity RC have introduced the Touring Car Sidewall Glue Trace kit. The set is used to consistently mark the sidewall of front touring car tyres in preparation for CA glue application, which is used to help prevent grip rolling on carpet. Tracing the outside of the disk with the included paint marker provides you with a consistent and defined line which serves as a visual boundary while applying CA glue up the sidewall. The 58.5mm disc is the recommended trace for lower grip conditions while the 59.5mm disc is the recommended trace for medium to high grip conditions. Included in the kit is one 58.5mm disc, one 59.5mm disk, one silver paint marker, as well as a fastener to secure the disc to the outside of the tyre.
Source: Gravity RC [teamgravityrc.com]
