Red RC

November 16, 2016

Edward Sio wins Philippine Nitro Truggy Nationals

The 2016 Philippine Nitro Truggy Nationals were held at the Circulo Verde Track in Quezon City, Philippines. Hot and sunny weather made for a nice day of racing and right from the opening qualifier the race for the overall TQ was on between Edward Sio and Jordan Go. Edward took the opening round but Jordan came out fastest in the following qualifiers, handing him the overall TQ with a time of 7 minutes and 5 seconds. In the A-main, Jordan started from the pole position followed by Edward and Clemen Pancho. During the opening 25 minutes Jordan kept the lead with Edward on the 2 spot, about 20 seconds behind. Nani Tagle was hot on the heels of Edward and both would eventually swap positions at the pit stops until Nani had to retire after a bad landing of his truck. This promoted Clemen into third and up front and with about ten minutes to go, Jordan’s lead slowly decreased from 20 down to three seconds. About four minutes from the end, Edward was chasing Jordan hard and when the latter came in for a final splash and dash, he suffered a flame out but despite a quick restart, Edward Sio (Mugen/Novarossi/AKA) was able to take the lead and with it the win and overall title from Jordan Go (Mugen/Novarossi/AKA) in second and Clemen Pancho (Mugen/Novarossi/AKA) third.

Thanks to Edward Sio for the report.

November 16, 2016

Maclan Racing MRR Team Edition brushless motors

Maclan Racing have introduced the MRR Team Edition electric brushless motors. Based on the popular MRR platform the Team Edition utilises Japanese made steel stator material for the short stack style rotors. Custom-made copper wire also has a higher temperature threshold along with maximum diameter allowed by ROAR regulations. Overall the Team Edition has an average four percent lower internal resistance compared to the standard MRR series motors. Also part of the TE package are all-new hall sensors that are more accurate while offering a much higher speed polling rate which will provide quicker throttle response with higher top speeds. The hand-built motors will become available by late November.

View more images here

November 15, 2016

JConcepts Torch 1.9” aluminium beadlock wheel set

The Torch 1.9” aluminium beadlock wheel set for Scale | Trail vehicles by JConcepts is extremely versatile for the competitor, but authentic enough to have the detail for a show worthy rig. The 6 spoke wheel is a straight-forward design, incorporating a triangle type spoke around the centre for heavy street appeal. The basic color is black, however, the natural color of the aluminium wheel has been exposed in the spokes which adds a touch of mystery and depth. Around the hub section, a flared boss surrounds the screw mounting area and has been silver highlighted to bring out the luster of an all metal wheel design.

View more details & images here

November 15, 2016

Shepherd Velox F1 updates

Shepherd have announced a number of small updates for the Velox F1 for the 16/17 winter season. From now on the front lower wishbones will be machined from a stiffer carbon material for a more direct feeling of the car while the geometry of the upper wishbone mount has been updated to ensure freer movement of the wishbones.

Source: Shepherd [team-shepherd.com]

November 15, 2016

Arrma Nero Fazon & Outcast

The Nero Fazon from Arrma mixes a sleek, low-profile design with innovative Diff Brain technology to optimize performance in any condition. Already proven in the best-selling Arrma Nero, the Diff Brain enables Nero Fazon racers to switch between four versatile driving styles (Blast, Wheelie, Drift and Climb) on the fly, right from the transmitter. Each style engages a special combination of the three gear diffs to achieve the best traction and handling for specific tasks and terrains. A unique feature is a standard wheelie bar that helps keep the front wheels in contact with the ground. A powerful BLX4075 2000kV 4-pole 6S brushless motor, dependable waterproof BLX200 ESC and interference-free Tactic TTX300 radio system add to the ready-to-run convenience.

View details on the Outcast here

November 15, 2016

Akiyama win Speed King Tour Rd7

The seventh and final round of the 2016 Speed King Tour took place at Crest Speedway indoor carpet track in Gunma prefecture last weekend. TRF driver Akio Sobue has already crowned 2016 Modified class series champion but he was still in attendance. The typical Modified and Stock touring classes were run alongside two special classes, the first one is Oval class while the other was the ‘Father and Mother’ class. Only parents of race entrant can enter this race and although some fathers were ‘racers’, some parents had no experience of driving RC cars which led to some chaos.

Continue reading the report here

November 15, 2016

Samix SCX10-2 aluminium driveshaft caps

New parts for the Axial SCX10-2 from Samix continue to released, with the announcement of new aluminium driveshaft caps. As with all the other parts, they are available in 3 different colours and feature the Samix branding etched into the anodised surface. Not just looking good, they also provide more rigidity and increase durability in this area.

Source: Samix [rcsamix.com]

November 15, 2016

FX Engines Short-Medium manifold

FX Engines have added a new Short-Medium manifold to their line-up. A combination of short and medium manifold which makes it more universal and compatible with the majority of tracks, it was developed & designed to work well with mufflers 2131 and 2068. Suitable for larger tracks, where more bottom end punch is required than the short manifold.

Source: FX [fx-engines.com]