Red RC

September 10, 2014

Sonic EFRA #2678 .12 exhaust pipe

Sonic introduce the new EFRA #2678 exhaust pipe for .12 nitro on-road engines. Developed in cooperation with various top-drivers and successfully used by Patrick Schäfer at the Euros A and German championships, the latest Sonic pipe lowers the fuel-consumption for increased runtime while keeping a good balance of bottom end power and maximum RPM. The pipe is EFRA legal and available from now as pipe only or as a complete set including manifold, springs and silicon gasket.

Source: Sonic Engines [sonic-engines.com]

September 10, 2014

Ryan Cavalieri takes E-buggy class at SNE

The eleventh annual Sidewinder Nitro Explosion was held at Heritage RC Park in Chula Vista, CA. Team Associated driver, Ryan Cavalieri, had an exceptional weekend with a TQ and win in the E-buggy class outperforming Lucas Sanford (Kyosho) in 2nd and Chad Panek (Tekno RC) in 3rd spot.

Image: Jimmy Babcock

September 10, 2014

Daniele Ielasi wins Italian 1/8th on-road Nationals

Daniele Ielasi wins Italian 1/8th on-road championship

Last weekend saw the running of the 3rd round of the Italian nitro on-road championships at the Milazzo track in Sicily. Daniele Ielasi swiftly showed that he was the man to beat during the weekend by setting fast times from the first practice on. After taking the TQ in the Expert class Daniele then went on the win the race in front of Mirko Salemi and Marco Vanni, handing the former World Champion the national title. In the F1 category Gennaro D’Alterio, starting from 2nd on the grid, took the win 3 laps ahead of Gianluca Querze and Nicolas Delia.

Click here to view the F1 category podium

September 10, 2014

Martini & Puelo win at Italian WRC Contest

The Italian Bientina track played host for the recent WRC Contest with many drivers using the event to prepare for the upcoming round of the Italian championships held at this track in mid-September. In the Touring Car Modified class Francesco Martini took the TQ in the first round and used the remaining qualifiers to test various settings. In the Stock class the race was on between Marco Puelo, Tiziano Borgogni, Roberto Fabiano and Andrea Valerio. At the end Marco Puelo was able to take the TQ for the finals.

Click here to continue reading

September 10, 2014

WRC F-One ‘014 lower rear pod plate

WRC F-One '014 lower rear pod plate

Italian company WRC Racing introduce a new lower rear pod plate for their F-One ‘014 1/10th formula 1 car kit. Cut from 2.3mm carbon fibre redesigned plate offers improved rigidity to better withstand the rigours of racing.

Source: WRC Racing [wrc-racing.com]

September 10, 2014

Chad Due takes 2WD at Futaba Electric Challenge

This weekend was the Futaba Electric Challenge hosted by Leisure Hours Raceway in Joliet, Illinois. This very unique event which competes on both indoor and outdoor surfaces across two days of racing to crown an overall champion. The first day of competition started on Leisure Hours’ flowing, high-grip indoor track. In 2WD, Chad Due was able to TQ two of the three rounds of qualifying to start first on the grid in the main, followed by Ryan Lutz (Team Durango) and fellow Team Associated teammate Corey Liebherr. In the main, the first few laps were very clean and then a mistake by Ryan and Corey gave room for Mason Perillo (Team Associated). At the end Chad was able to cruise to the finish with Mason taking 2nd and Ryan 3rd.

Click here to continue reading

September 10, 2014

HPI Micro RS4 Drift Nissan S13 RTR

HPI Racing soon have a new bodyshell variant for the iconic Micro RS4 1/18th scale chassis available. The Discount Tire/Falken Tire Nissan S13 replicates Dai Yoshihara’s tarmac eating drift machine and the belt-driven 4WD chassis is equipped with solid front and rear axles as well as hard plastic drift tyres. A full set of ball bearings reduced drivetrain losses to a minimum. The car is powered by an HPI 180-size motor, an electronic speed control, and controlled by a waterproof steering servo. A 2.4GHz radio system, wall charger and batteries round out the package.

Click here to view the features and another photo

September 10, 2014

Arrowmax B-Max2 rear brass bulkhead set

Made for Yokomo’s B-Max2 2WD buggy is this rear brass bulkhead set from Arrowmax. The multi-piece part replaces the stock bulkhead with a heavier and more rigid solution for an improved weight balance and a rock solid rear end. The bulkhead weighs in at 36g, it incorporates a rear swaybar mounting system for high-bite surfaces and it is available now.

Source: Arrowmax [arrowmax-rc.com]