Red RC

January 20, 2010

LRP S8 BXe Premium RTR buggy

LRP have introduced their S8 BXe Premium RTR, an brushless powered version of the company’s S8 BXe Team car. Supplied with the Vector8 brushless modified motor, it utilizes the SPX8 ESC to control the new power plant. The car itself features a robust 3mm 6061 T6 anodized aluminium chassis and aluminium tuning shock towers taken over from the nitro-version. In addition to this the S8 BXe RTR features the LRP factory team tested 17.5 Big Bore shocks and VTEC 1/8 Buggy Competition tyre and much more. Prepared for use with two 7.4V LiPo batteries, the S8 BXe guarantees absolute driving fun with the possibility to update it with all the current tuning parts available for the Team Kit.

Click here for more images

January 20, 2010

Durango shows of the DNX408’s rear end

Durango continue to tease us with close up shots of their prototype DNX408 1/8th scale buggy. The car’s rear-end design is all about low weight, keeping weight forward, putting the wing over the rear wheels and giving the most ground clearance. The 408 claims to ‘probably be the lightest car on the market’, which is thanks to many design considerations such as the minimalistic gearbox case, slender but tough bulkheads and the smallest rear overhang of any car.

Click here more information and photos

January 20, 2010

ProTek R/C 5400 & 5000mAh LiPo race packs

A Main Hobbies today announced four new ProTek R/C brand LiPo packs, starting with this 4-cell hard case pack with 5400mAh of capacity and a true 35C constant discharge rate. This pack includes an integrated balance charge lead with a Deans style T-plug installed. Next up is a 2-cell hard case 5000mAh pack with a true 40C constant discharge rate that includes heavy duty bullet connectors and a balance charge lead that you can solder onto the wire of your choice. The bullet connectors also feature side cut-outs for soldering on wires to fit in tight areas or in cars with low upper deck heights. A similar pack this other 2-cell 5000mAh pack also has a true 40C constant discharge rate but includes an integrated balance charge lead with a Deans style T-plug installed. Finally, a 1-cell 5000mAh hard case pack which has a true 40C constant discharge rate and includes a Deans style T-plug installed.

Click here to see the other packs

January 20, 2010

Shepherd Velox V8 rear body mount extension

New from Shepherd are these rear body mount extensions for the Velox V8. Due to the design of current 1/8th scale bodies and the allowed riding height many racers raise the rear body mount to increase the angle of the body as well as the downforce. With the new easy to install aluminium extension it is very comfortable to adjust the height of the rear body mount. Within a few moments the height can be changed and different setups can be tried. The set includes the aluminium extensions, body clips and extra long nylon screws.

Source: Shepherd [team-shepherd.com]

January 20, 2010

CRC Pink Pro Cuts, Final Cut & Battle Axe upgrades

More new items from CRC who have introduced their soft long wear pink front Pro Cut 1/12th tires. Pink is 30 shore R4 from Japan. The R4 line of rubber is very durable and long wear with the soft 30 shore providing extremely high grip. This tire is best for low grip carpet and asphalt surfaces. To reduce these and any other tires to the correct diameter CRC have also released the Final Cut tire truer cutting bit. A super hard tungsten carbide cutting bit with sharp, super hard teeth it remains sharp cut after cut. The finish on the foam after truing is absolutely smooth and ready to race. Because it cuts so cleanly and aggressively, the Final Cut truing bit reduces the load on the truer motor by removing material rather than pushing it around. Finally for their Battle Axe oval car, is a left offset motor pod conversion that pushes the motors to the left for better cornering speeds. The parts are available in a couple different conversion “kits” and separately as well. The rear top plate has been ‘tweaked’ to allow easier use of CRC’s new Encore Shocks. Also available is the wide-mount cross plate that allows you to use much shorter body mounts in a more stable wider position.

Click here to see the other products

January 19, 2010

Pro-Line Silverado, 14RS & more

Click here to see the rest of the products

January 19, 2010

Protoform TCC wing set

Following requested by oval racers to make TCC wings available separately, Protoform responded with this double wing set pulled in durable lexan. These wings with the add-on spill plates are identical to the wings that are included with the TCC race body at the time of purchase. Now you’re able to have extra wings in your pit box to allow for experimentation with varying degrees of downforce as well as the ability to replace damaged wings. Supplied with mounting hardware.

Source: Protoform [prolineracing.com]

January 19, 2010

Pro-Line Silverado, 14RS, Suburbs front & more

Judging by their January releases Pro-Line have been busy with a whole host of new bodies, tires and wheels being announced. Starting with the new Chevy Silverado Short course truck body, perfect for Chevy race fans to deck out their Slash or SC10 chassis’. Also for the same SC cars, is this 14RS shell, which resembles more a Dakar style race truck than your traditional Short course race truck. Both bodies are sold clear and supplied with window mask and decal sheets. Bringing colour to your racing, PL now offer their range of Split six wheels in 2 additional colours, white and yellow, in addition to the already available black versions. To follow up on the release of their Suburbs pattern for rear tires mid last year, you can now get the same pattern for us on the front of your 4wd buggy. Available in M3, MX and MC compounds. To final releases from Pro Line are their new Volkswagen Baja bug body for the 1/16th E-Revo and the Chevy Blazer for 1/18th crawlers.

Click here to see the rest of the products