The GQ Cup was held at the Icheon RC Circuit in Icheon, Korea this past weekend. Wataru Takashiro set the overall TQ and he also took the win in the 45-minute Nitro Buggy main final. Kim Yeon Ho came in 2nd followed by Ryan Lee who rounded out the top 3 results.
Source: Reds Racing [reds-racing.com]
The fifth and final round of the French Electric Off-road Championship was held at the CARCA track in Noeux Les Mines over the weekend. In the 4WD Modified Buggy class it was Thomas Musso with the overall TQ, taking five of the six qualifying rounds to leave behind Renaud Savoya in 2nd and Thomas Anger in 3rd. The triple A-main events again saw Thomas Musso making a clean sweep and by taking wins in all three legs he secured the overall from Savoya and Anger. With the win at the final round, Thomas Musso also took the French 4WD Buggy National title.
Source: Corally [corally.com]
The 2019 EFRA 1/8th E-Buggy European Championship was held in Barcelona, Spain over the weekend. Team Associated’s Davide Ongaro and HB Racing’s David Ronnefalk battled it out for the overall TQ with Davide ultimately holding the upper hand, winning three of the five qualifiers while David was able to win the remaining two rounds. The three 10-minute A-mains then had Davide taking a very close win in A1 and a not-so-close victory in A2 for the early overall title from David on the runner-up spot. Davide then sat out A3, making way for SWorkz’s Juan Carlos Canas who would take the win to cement his his final podium spot from Kyosho’s Joao Figueiredo in 4th.
Image: Modelix Racing [modelixracing.com]
OCRC Raceway of Huntington Beach, California played host to the 12th annual Pro-Line Surf City Classic this past weekend, attracting over 310 entries. In 13.5T Stock Buggy it was Yokomo’s Matthew Gonzales with the overall TQ and he would also take the win in the single 10-minute A-main event, leaving behind Team Associated’s Antonio Counsil in 2nd, a lap down. TLR’s Matthew Willbilly came in 3rd some 2.8 seconds down on Antonio to round out the podium. Over in 17.5T Stock Buggy it was again Matthew with the overall TQ and win as Antonio scored another runner-up spot, 9.6 seconds behind Matty G. Team Associated’s Ezra Keller would round out the top 3 another second down.
View the 2WD Stock Buggy podium here
The oOple Invernational X was held at the Robin Hood Raceway in the UK this past weekend, attracting some of Europe’s fastest 1/10th off-road racers. Schumacher’s Michael Orlowski would take the overall TQ in 2WD Modified Buggy and he also came out on top in A2 and A3 after scoring a 4th place finish in the reverse grid A1. Team Associated’s Neil Cragg took 4-2-2 finishes for the overall runner-up spot from Greg Williams in 3rd with 9-3-3 runs. 4WD Modified Buggy again had Michal scathing the overall TQ and win from Neil as Allan O Brien (Schumacher) came in 3rd overall.
View the 4WD Modified Buggy podium here
German company PSM has released first teaser images of their forthcoming new balance weight chassis for cars such as the Yokomo BD9, Xray T4, Tamiya TA07 and the Team Associated B74. No details are available yet beside two teaser images but by the look of things the chassis allow to add balance weights in milled pockets for a lower overall centre of gravity and upped overall weight when needed. Full details will be release later this week.
View another teaser image here
Pemberton RaceWorks have announced the release of their The Final Answer Traxxas Slash Edition adjustable rear arms. These arms share a design as used in the 10th scale dirt oval world, and this very same technology is now available for the ever popular Traxxas Slash platform. The product offers a great amount of track side adjustability and allow for up to 12 degrees of rear toe adjustment (+6 degrees to -6 degrees) while also allowing to access track width adjustment. The arms sport two sliding rails that are captured in the arm’s front and rear pockets. The rails can be individually positioned at various lengths creating toe-in and/or toe-out at the outer hinge pin position. Advantages of the design include no change in wheelbase while adding toe settings, and toe positioning will not move as a result of a crash or brushing the wall. Built from nearly indestructible Nylon 6-6 and aluminium, these arms are also ultra-strong and applications include dirt oval, offroad, and drag racing. The set includes arms, rails, screws, pivot balls, shims and Lunsford Titanium inner and outer hinge pins.
JQRacing have introduced their new Black Edition eCar 1/8th scale electric off-road buggy. The updated kit shares the Black nitro, and Grey eBuggy’s front and rear gearboxes, with the centre portion and chassis being all new. The latter features 3mm thickness and a longer wheelbase for improved grip and stability while the improved centre diff and motor mount adds strength and ensures reliable gear mesh. New are also the carbon fibre battery holders with the battery mount taking full length and shorty LiPo battery packs. Two positions for the shorty batteries also allow the driver to access different weight bias settings while an improved front brace makes for stability and strength.
