Red RC » P Off Road

February 6, 2018

RPM Stampede 2WD rear bumper

Coming from RPM and made for Traxxas’ Stampede 2WD truck is an additional rear bumper. It combines scale looks with performance that works as it is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas wheelie bar. Additionally, if drivers decide to run without the wheelie bar, the rear bumper is so versatile, it will adapt and allow either configuration. The bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today’s top full-scale bumper manufacturers. RPM start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3” square openings for 5mm LEDs. The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an optional RPM rear bumper mount, the protection for the motor becomes nearly indestructible. The rear bumper is available in black or blue colour and it is made from engineering grade nylons.

View more images here

February 6, 2018

JConcepts Super Cup Championship Series Rd2 – Report

Round 2 of the 2018 JConcepts Super Cup Championship Series made its way over to Newberry, Florida, home to one of the raddest RC tracks in the Sunshine state. Without a doubt, the size and premise of Newberry’s track are just about perfect for a 1/10th scale outdoor track. With a dialed, low-style driver stand to bring you closer to the action is a recipe for an exciting time in Newberry. Florida’s winter is actually nice for those who aren’t accustomed to 20°C weather in early February. However, since the track is located in an open field, constant wind gusts combined with below 5°C temps did make it a “cold” day by Floridian standards. Nonetheless, the sun did shine reminding everyone the beauty of outdoor racing. With nearly 190 entries on hand, the energy was soaring and the racing top notch.

Continue reading the report here

February 5, 2018

SWorkz S35-3 series 6mm alloy axle inserts

SWorkz have introduced a set of 6mm alloy axle inserts for the S35-3 series of vehicles. The parts directly replace the original plastic inserts and increase durability with the lightened 6x12x4mm ball bearing. Using the parts will also make for a more stable steering response and increased ball bearing life. The 4-piece sets fits the S35-3, S35-3E, S35-GT and S35-GTE.

View another image here

February 5, 2018

SBS Off-road Major League Rd1 – Report

Round 1 of the SBS 1/10th Electric Off-road Major League was held at Syahmi’s Backyard Speedway in Sungai Buloh, Selangor, Malaysia over the weekend. The excellent weather made for very good racing conditions and a total of 39 racers that attended the three classes of Open 2WD Buggy, Open 4WD Buggy and Open 4WD Short Course. 2WD Open Buggy, which recently saw an increase in racers, was as competitive as any other racing class. Mark Lim from Singapore took Q1 with 10 laps 5m 7.18s while Kum Yew, also of Singapore, bagged Q2 and Q3. However his time was not an improvement over Mark’s, handing him the TQ spot. WK Foong completed the top 3 qualifiers on the grid.

Continue reading the report here

February 5, 2018

Adrian Wicaksono wins at 2018 MRCC Buggy Challenge

The 2018 MRCC Buggy Challenge was held this past weekend at the MRCC track in Medan, North Sumatera, Indonesia. The 9th edition of the race was attended by 27 racers from Jakarta, Bandung, Batam, Banjarmasin, Pontianak as well as local drivers and after four qualifying rounds it was Jason Nugroho (Xray/Novarossi) the TQ honours. However after the 45-minute A-main it was Adrian Wicaksono (Mugen/O.S.) with the win from Jason in 2nd and Stanley Wangsanegara (HB Racing/O.S.) who completed the overall top 3 result.

View the final results here

February 5, 2018

Leadfinger Racing A2 Tactic NB48.4 body shell

Coming soon from Leadfinger Racing is the A2 Tactic body shell for the Tekno RC NB48.4 buggy. An evolution of the original Assassin design the lid offers a lower downforce thanks to a narrowed cab and less windshield rake. Bump outs for the fuel tank and throttle servo make for lots of clearance and lower side pods with added rails improve high speed handling while in addition the longer overall length aids against chassis flex damage. The body is made of thicker polycarbonate material for durability, it come clear, including window masks and it is available for pre-order now.

View another image here

February 5, 2018

Kyosho Yuichi Kanai turnbuckle & ball end tools

Kyosho’s Yuichi Kanai has released a first preview image of two new turnbuckle and ball end tools that are about to hit stores soon. One features 5.5mm and 7.0mm ends for turnbuckles and steering pins while the second, with 6.5mm and 8.0mm ends was designed for 6.8mm ball ends and 7.8mm taper balls. Both were developed for the use with Kyosho’s MP9 series of vehicles, they sport engraved markings for easy identification and will become available very soon.

Image: Yuichi Kanai

February 5, 2018

Tanner Day takes 2018 Winter Invitational win

PDX RC Underground of Portland, Oregon held their 2018 Winter Invitational this past weekend and in the 2WD Invitational class it was Yokomo’s Tanner Day with the overall win from Chris Jarosz in 2nd. Joe Pillars would round out an all-Yokomo podium with Andi DiBrino (Yokomo) coming in 4th and Kyosho’s Zack Rogers completing the top 5 results.

Source: Muchmore [muchmoreracing.net]